]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/m53evk.h
karo: fdt: fix panel-dpi support
[karo-tx-uboot.git] / include / configs / m53evk.h
1 /*
2  * DENX M53 configuration
3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 #ifndef __M53EVK_CONFIG_H__
9 #define __M53EVK_CONFIG_H__
10
11 #define CONFIG_SYS_GENERIC_BOARD
12 #define CONFIG_MXC_GPIO
13
14 #include <asm/arch/imx-regs.h>
15
16 #define CONFIG_DISPLAY_CPUINFO
17 #define CONFIG_BOARD_EARLY_INIT_F
18 #define CONFIG_REVISION_TAG
19 #define CONFIG_SYS_NO_FLASH
20
21 #define CONFIG_FIT
22
23 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
24
25 /*
26  * U-Boot Commands
27  */
28 #define CONFIG_DISPLAY_BOARDINFO
29 #define CONFIG_DOS_PARTITION
30 #define CONFIG_FAT_WRITE
31
32 #define CONFIG_CMD_ASKENV
33 #define CONFIG_CMD_BMP
34 #define CONFIG_CMD_DATE
35 #define CONFIG_CMD_DHCP
36 #define CONFIG_CMD_EXT4
37 #define CONFIG_CMD_EXT4_WRITE
38 #define CONFIG_CMD_FAT
39 #define CONFIG_CMD_FS_GENERIC
40 #define CONFIG_CMD_GREPENV
41 #define CONFIG_CMD_I2C
42 #define CONFIG_CMD_MII
43 #define CONFIG_CMD_MMC
44 #define CONFIG_CMD_NAND
45 #define CONFIG_CMD_PING
46 #define CONFIG_CMD_SATA
47 #define CONFIG_CMD_USB
48 #define CONFIG_VIDEO
49
50
51 /*
52  * Memory configurations
53  */
54 #define CONFIG_NR_DRAM_BANKS            2
55 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
56 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
57 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
58 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
59 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
60 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
61 #define CONFIG_SYS_MEMTEST_START        0x70000000
62 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
63
64 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
65 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
66 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
67
68 #define CONFIG_SYS_INIT_SP_OFFSET \
69         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
70 #define CONFIG_SYS_INIT_SP_ADDR \
71         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
72
73 #define CONFIG_SYS_TEXT_BASE            0x71000000
74
75 /*
76  * U-Boot general configurations
77  */
78 #define CONFIG_SYS_LONGHELP
79 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
80 #define CONFIG_SYS_PBSIZE       \
81         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
82                                                 /* Print buffer size */
83 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
84 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
85                                                 /* Boot argument buffer size */
86 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
87 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
88 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
89 #define CONFIG_SYS_HUSH_PARSER
90
91 /*
92  * Serial Driver
93  */
94 #define CONFIG_MXC_UART
95 #define CONFIG_MXC_UART_BASE            UART2_BASE
96 #define CONFIG_CONS_INDEX               1
97 #define CONFIG_BAUDRATE                 115200
98
99 /*
100  * MMC Driver
101  */
102 #ifdef CONFIG_CMD_MMC
103 #define CONFIG_MMC
104 #define CONFIG_GENERIC_MMC
105 #define CONFIG_FSL_ESDHC
106 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
107 #define CONFIG_SYS_FSL_ESDHC_NUM        1
108 #endif
109
110 /*
111  * NAND
112  */
113 #define CONFIG_ENV_SIZE                 (16 * 1024)
114 #ifdef CONFIG_CMD_NAND
115 #define CONFIG_SYS_MAX_NAND_DEVICE      1
116 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
117 #define CONFIG_NAND_MXC
118 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
119 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
120 #define CONFIG_SYS_NAND_LARGEPAGE
121 #define CONFIG_MXC_NAND_HWECC
122 #define CONFIG_SYS_NAND_USE_FLASH_BBT
123
124 /* Environment is in NAND */
125 #define CONFIG_ENV_IS_IN_NAND
126 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
127 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
128 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
129 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
130 #define CONFIG_ENV_OFFSET_REDUND        \
131                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
132
133 #define CONFIG_CMD_UBI
134 #define CONFIG_CMD_UBIFS
135 #define CONFIG_CMD_MTDPARTS
136 #define CONFIG_RBTREE
137 #define CONFIG_LZO
138 #define CONFIG_MTD_DEVICE
139 #define CONFIG_MTD_PARTITIONS
140 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
141 #define MTDPARTS_DEFAULT                        \
142         "mtdparts=mxc_nand:"                    \
143                 "1024k(u-boot),"                \
144                 "512k(env1),"                   \
145                 "512k(env2),"                   \
146                 "14m(boot),"                    \
147                 "240m(data),"                   \
148                 "-@2048k(UBI)"
149 #else
150 #define CONFIG_ENV_IS_NOWHERE
151 #endif
152
153 /*
154  * Ethernet on SOC (FEC)
155  */
156 #ifdef CONFIG_CMD_NET
157 #define CONFIG_FEC_MXC
158 #define IMX_FEC_BASE                    FEC_BASE_ADDR
159 #define CONFIG_FEC_MXC_PHYADDR          0x0
160 #define CONFIG_MII
161 #define CONFIG_DISCOVER_PHY
162 #define CONFIG_FEC_XCV_TYPE             RMII
163 #define CONFIG_PHYLIB
164 #define CONFIG_PHY_MICREL
165 #define CONFIG_ETHPRIME                 "FEC0"
166 #endif
167
168 /*
169  * I2C
170  */
171 #ifdef CONFIG_CMD_I2C
172 #define CONFIG_SYS_I2C
173 #define CONFIG_SYS_I2C_MXC
174 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
175 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
176 #endif
177
178 /*
179  * RTC
180  */
181 #ifdef CONFIG_CMD_DATE
182 #define CONFIG_RTC_M41T62
183 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
184 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
185 #endif
186
187 /*
188  * USB
189  */
190 #ifdef CONFIG_CMD_USB
191 #define CONFIG_USB_EHCI
192 #define CONFIG_USB_EHCI_MX5
193 #define CONFIG_USB_STORAGE
194 #define CONFIG_USB_HOST_ETHER
195 #define CONFIG_USB_ETHER_ASIX
196 #define CONFIG_USB_ETHER_MCS7830
197 #define CONFIG_USB_ETHER_SMSC95XX
198 #define CONFIG_MXC_USB_PORT             1
199 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
200 #define CONFIG_MXC_USB_FLAGS            0
201 #endif
202
203 /*
204  * SATA
205  */
206 #ifdef CONFIG_CMD_SATA
207 #define CONFIG_DWC_AHSATA
208 #define CONFIG_SYS_SATA_MAX_DEVICE      1
209 #define CONFIG_DWC_AHSATA_PORT_ID       0
210 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
211 #define CONFIG_LBA48
212 #define CONFIG_LIBATA
213 #endif
214
215 /*
216  * LCD
217  */
218 #ifdef CONFIG_VIDEO
219 #define CONFIG_VIDEO_IPUV3
220 #define CONFIG_CFB_CONSOLE
221 #define CONFIG_VGA_AS_SINGLE_DEVICE
222 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
223 #define CONFIG_VIDEO_BMP_RLE8
224 #define CONFIG_VIDEO_BMP_GZIP
225 #define CONFIG_SPLASH_SCREEN
226 #define CONFIG_SPLASHIMAGE_GUARD
227 #define CONFIG_SPLASH_SCREEN_ALIGN
228 #define CONFIG_BMP_16BPP
229 #define CONFIG_VIDEO_LOGO
230 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
231 #define CONFIG_IPUV3_CLK                200000000
232 #endif
233
234 /*
235  * Boot Linux
236  */
237 #define CONFIG_CMDLINE_TAG
238 #define CONFIG_INITRD_TAG
239 #define CONFIG_REVISION_TAG
240 #define CONFIG_SETUP_MEMORY_TAGS
241 #define CONFIG_BOOTDELAY        3
242 #define CONFIG_BOOTFILE         "fitImage"
243 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
244 #define CONFIG_LOADADDR         0x70800000
245 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
246 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
247 #define CONFIG_OF_LIBFDT
248
249 /*
250  * NAND SPL
251  */
252 #define CONFIG_SPL_FRAMEWORK
253 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
254 #define CONFIG_SPL_BOARD_INIT
255 #define CONFIG_SPL_TEXT_BASE            0x70008000
256 #define CONFIG_SPL_PAD_TO               0x8000
257 #define CONFIG_SPL_STACK                0x70004000
258 #define CONFIG_SPL_GPIO_SUPPORT
259 #define CONFIG_SPL_LIBCOMMON_SUPPORT
260 #define CONFIG_SPL_LIBGENERIC_SUPPORT
261 #define CONFIG_SPL_NAND_SUPPORT
262 #define CONFIG_SPL_SERIAL_SUPPORT
263
264 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
265 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
266 #define CONFIG_SYS_NAND_OOBSIZE         64
267 #define CONFIG_SYS_NAND_PAGE_COUNT      64
268 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
269 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
270
271 /*
272  * Extra Environments
273  */
274 #define CONFIG_PREBOOT          "run try_bootscript"
275 #define CONFIG_HOSTNAME         m53evk
276
277 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
278         "consdev=ttymxc1\0"                                             \
279         "baudrate=115200\0"                                             \
280         "bootscript=boot.scr\0"                                         \
281         "bootdev=/dev/mmcblk0p1\0"                                      \
282         "rootdev=/dev/mmcblk0p2\0"                                      \
283         "netdev=eth0\0"                                                 \
284         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
285         "kernel_addr_r=0x72000000\0"                                    \
286         "addcons="                                                      \
287                 "setenv bootargs ${bootargs} "                          \
288                 "console=${consdev},${baudrate}\0"                      \
289         "addip="                                                        \
290                 "setenv bootargs ${bootargs} "                          \
291                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
292                         "${netmask}:${hostname}:${netdev}:off\0"        \
293         "addmisc="                                                      \
294                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
295         "adddfltmtd="                                                   \
296                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
297                         "mtdparts default ; "                           \
298                 "fi\0"                                                  \
299         "addmtd="                                                       \
300                 "run adddfltmtd ; "                                     \
301                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
302         "addargs=run addcons addmtd addmisc\0"                          \
303         "mmcload="                                                      \
304                 "mmc rescan ; "                                         \
305                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
306         "ubiload="                                                      \
307                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
308                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
309         "netload="                                                      \
310                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
311         "miscargs=nohlt panic=1\0"                                      \
312         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
313         "ubiargs="                                                      \
314                 "setenv bootargs ubi.mtd=5 "                            \
315                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
316         "nfsargs="                                                      \
317                 "setenv bootargs root=/dev/nfs rw "                     \
318                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
319         "mmc_mmc="                                                      \
320                 "run mmcload mmcargs addargs ; "                        \
321                 "bootm ${kernel_addr_r}\0"                              \
322         "mmc_ubi="                                                      \
323                 "run mmcload ubiargs addargs ; "                        \
324                 "bootm ${kernel_addr_r}\0"                              \
325         "mmc_nfs="                                                      \
326                 "run mmcload nfsargs addip addargs ; "                  \
327                 "bootm ${kernel_addr_r}\0"                              \
328         "ubi_mmc="                                                      \
329                 "run ubiload mmcargs addargs ; "                        \
330                 "bootm ${kernel_addr_r}\0"                              \
331         "ubi_ubi="                                                      \
332                 "run ubiload ubiargs addargs ; "                        \
333                 "bootm ${kernel_addr_r}\0"                              \
334         "ubi_nfs="                                                      \
335                 "run ubiload nfsargs addip addargs ; "                  \
336                 "bootm ${kernel_addr_r}\0"                              \
337         "net_mmc="                                                      \
338                 "run netload mmcargs addargs ; "                        \
339                 "bootm ${kernel_addr_r}\0"                              \
340         "net_ubi="                                                      \
341                 "run netload ubiargs addargs ; "                        \
342                 "bootm ${kernel_addr_r}\0"                              \
343         "net_nfs="                                                      \
344                 "run netload nfsargs addip addargs ; "                  \
345                 "bootm ${kernel_addr_r}\0"                              \
346         "try_bootscript="                                               \
347                 "mmc rescan;"                                           \
348                 "if test -e mmc 0:1 ${bootscript} ; then "              \
349                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
350                 "then ; "                                               \
351                         "echo Running bootscript... ; "                 \
352                         "source ${kernel_addr_r} ; "                    \
353                 "fi ; "                                                 \
354                 "fi\0"
355
356 #endif  /* __M53EVK_CONFIG_H__ */