include/configs/mx23_olinuxino.h

   1 /*
   2  * Copyright (C) 2013 Marek Vasut <marex@denx.de>
   3  *
   4  * This program is free software; you can redistribute it and/or
   5  * modify it under the terms of the GNU General Public License as
   6  * published by the Free Software Foundation; either version 2 of
   7  * the License, or (at your option) any later version.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * You should have received a copy of the GNU General Public License
  15  * along with this program; if not, write to the Free Software
  16  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  17  * MA 02111-1307 USA
  18  */
  19 #ifndef __MX23_OLINUXINO_CONFIG_H__
  20 #define __MX23_OLINUXINO_CONFIG_H__
  21
  22 /*
  23  * SoC configurations
  24  */
  25 #define CONFIG_MX23                             /* i.MX23 SoC */
  26 #define CONFIG_MXS_GPIO                         /* GPIO control */
  27 #define CONFIG_SYS_HZ           1000            /* Ticks per second */
  28
  29 #define CONFIG_MACH_TYPE        4105
  30
  31 #include <asm/arch/regs-base.h>
  32
  33 #define CONFIG_SYS_NO_FLASH
  34 #define CONFIG_BOARD_EARLY_INIT_F
  35 #define CONFIG_ARCH_MISC_INIT
  36
  37 /*
  38  * SPL
  39  */
  40 #define CONFIG_SPL
  41 #define CONFIG_SPL_NO_CPU_SUPPORT_CODE
  42 #define CONFIG_SPL_START_S_PATH         "arch/arm/cpu/arm926ejs/mxs"
  43 #define CONFIG_SPL_LDSCRIPT     "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
  44 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  45 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  46 #define CONFIG_SPL_GPIO_SUPPORT
  47
  48 /*
  49  * U-Boot Commands
  50  */
  51 #include <config_cmd_default.h>
  52 #define CONFIG_DISPLAY_CPUINFO
  53 #define CONFIG_DOS_PARTITION
  54
  55 #define CONFIG_CMD_CACHE
  56 #define CONFIG_CMD_EXT2
  57 #define CONFIG_CMD_FAT
  58 #define CONFIG_CMD_GPIO
  59 #define CONFIG_CMD_MMC
  60
  61 /*
  62  * Memory configurations
  63  */
  64 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of DRAM */
  65 #define PHYS_SDRAM_1                    0x40000000      /* Base address */
  66 #define PHYS_SDRAM_1_SIZE               0x08000000      /* Max 128 MB RAM */
  67 #define CONFIG_SYS_MALLOC_LEN           0x00400000      /* 4 MB for malloc */
  68 #define CONFIG_SYS_GBL_DATA_SIZE        128             /* Initial data */
  69 #define CONFIG_SYS_MEMTEST_START        0x40000000      /* Memtest start adr */
  70 #define CONFIG_SYS_MEMTEST_END          0x40400000      /* 4 MB RAM test */
  71 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  72 /* Point initial SP in SRAM so SPL can use it too. */
  73
  74 #define CONFIG_SYS_INIT_RAM_ADDR        0x00000000
  75 #define CONFIG_SYS_INIT_RAM_SIZE        (128 * 1024)
  76
  77 #define CONFIG_SYS_INIT_SP_OFFSET \
  78         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  79 #define CONFIG_SYS_INIT_SP_ADDR \
  80         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  81 /*
  82  * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
  83  * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
  84  * binary. In case there was more of this mess, 0x100 bytes are skipped.
  85  */
  86 #define CONFIG_SYS_TEXT_BASE            0x40000100
  87
  88 /*
  89  * U-Boot general configurations
  90  */
  91 #define CONFIG_SYS_LONGHELP
  92 #define CONFIG_SYS_PROMPT       "=> "
  93 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  94 #define CONFIG_SYS_PBSIZE       \
  95         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  96                                                 /* Print buffer size */
  97 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  98 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  99                                                 /* Boot argument buffer size */
 100 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
 101 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
 102 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
 103 #define CONFIG_SYS_HUSH_PARSER
 104
 105 /*
 106  * Serial Driver
 107  */
 108 #define CONFIG_PL011_SERIAL
 109 #define CONFIG_PL011_CLOCK              24000000
 110 #define CONFIG_PL01x_PORTS              { (void *)MXS_UARTDBG_BASE }
 111 #define CONFIG_CONS_INDEX               0
 112 #define CONFIG_BAUDRATE                 115200  /* Default baud rate */
 113
 114 /*
 115  * MMC Driver
 116  */
 117 #ifdef  CONFIG_CMD_MMC
 118 #define CONFIG_MMC
 119 #define CONFIG_BOUNCE_BUFFER
 120 #define CONFIG_GENERIC_MMC
 121 #define CONFIG_MXS_MMC
 122 #endif
 123
 124 /*
 125  * APBH DMA
 126  */
 127 #define CONFIG_APBH_DMA
 128
 129 /*
 130  * Boot Linux
 131  */
 132 #define CONFIG_CMDLINE_TAG
 133 #define CONFIG_SETUP_MEMORY_TAGS
 134 #define CONFIG_BOOTDELAY        3
 135 #define CONFIG_BOOTFILE         "uImage"
 136 #define CONFIG_LOADADDR         0x42000000
 137 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 138 #define CONFIG_OF_LIBFDT
 139
 140 /*
 141  * Environment
 142  */
 143 #define CONFIG_ENV_IS_IN_MMC
 144 #define CONFIG_ENV_OVERWRITE
 145 #ifdef  CONFIG_ENV_IS_IN_MMC
 146 #define CONFIG_ENV_OFFSET       (256 * 1024)
 147 #define CONFIG_ENV_SIZE (16 * 1024)
 148 #define CONFIG_SYS_MMC_ENV_DEV 0
 149 #endif
 150
 151 /*
 152  * Extra Environments
 153  */
 154 #define CONFIG_EXTRA_ENV_SETTINGS \
 155         "update_sd_firmware_filename=u-boot.sd\0" \
 156         "update_sd_firmware="           /* Update the SD firmware partition */ \
 157                 "if mmc rescan ; then " \
 158                 "if tftp ${update_sd_firmware_filename} ; then " \
 159                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
 160                 "setexpr fw_sz ${fw_sz} + 1 ; " \
 161                 "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
 162                 "fi ; " \
 163                 "fi\0" \
 164         "script=boot.scr\0"     \
 165         "uimage=uImage\0" \
 166         "console=ttyAMA0\0" \
 167         "fdt_file=imx23-olinuxino.dtb\0" \
 168         "fdt_addr=0x41000000\0" \
 169         "boot_fdt=try\0" \
 170         "mmcdev=0\0" \
 171         "mmcpart=2\0" \
 172         "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \
 173         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 174                 "root=${mmcroot}\0" \
 175         "loadbootscript="  \
 176                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 177         "bootscript=echo Running bootscript from mmc ...; "     \
 178                 "source\0" \
 179         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 180         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 181         "mmcboot=echo Booting from mmc ...; " \
 182                 "run mmcargs; " \
 183                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 184                         "if run loadfdt; then " \
 185                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 186                         "else " \
 187                                 "if test ${boot_fdt} = try; then " \
 188                                         "bootm; " \
 189                                 "else " \
 190                                         "echo WARN: Cannot load the DT; " \
 191                                 "fi; " \
 192                         "fi; " \
 193                 "else " \
 194                         "bootm; " \
 195                 "fi;\0"
 196
 197 #define CONFIG_BOOTCOMMAND \
 198         "mmc dev ${mmcdev}; if mmc rescan; then " \
 199                 "if run loadbootscript; then " \
 200                         "run bootscript; " \
 201                 "else " \
 202                         "if run loaduimage; then " \
 203                                 "run mmcboot; " \
 204                         "else " \
 205                                 "echo ERR: Fail to boot from MMC; " \
 206                         "fi; " \
 207                 "fi; " \
 208         "else exit; fi"
 209
 210 #endif /* __MX23_OLINUXINO_CONFIG_H__ */