include/configs/mx31pdk.h

   1 /*
   2  * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
   3  *
   4  * (C) Copyright 2004
   5  * Texas Instruments.
   6  * Richard Woodruff <r-woodruff2@ti.com>
   7  * Kshitij Gupta <kshitij@ti.com>
   8  *
   9  * Configuration settings for the Freescale i.MX31 PDK board.
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_H
  15 #define __CONFIG_H
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 /* High Level Configuration Options */
  20
  21 #define CONFIG_SYS_GENERIC_BOARD
  22
  23 #define CONFIG_DISPLAY_CPUINFO
  24 #define CONFIG_DISPLAY_BOARDINFO
  25
  26 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29
  30 #define CONFIG_MACH_TYPE        MACH_TYPE_MX31_3DS
  31
  32 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  33 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
  34 #define CONFIG_SPL_MAX_SIZE     2048
  35 #define CONFIG_SPL_NAND_SUPPORT
  36 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  37 #define CONFIG_SPL_SERIAL_SUPPORT
  38
  39 #define CONFIG_SPL_TEXT_BASE    0x87dc0000
  40 #define CONFIG_SYS_TEXT_BASE    0x87e00000
  41
  42 #ifndef CONFIG_SPL_BUILD
  43 #define CONFIG_SKIP_LOWLEVEL_INIT
  44 #endif
  45
  46 /*
  47  * Size of malloc() pool
  48  */
  49 #define CONFIG_SYS_MALLOC_LEN           (2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
  50
  51 /*
  52  * Hardware drivers
  53  */
  54
  55 #define CONFIG_MXC_UART
  56 #define CONFIG_MXC_UART_BASE    UART1_BASE
  57 #define CONFIG_MXC_GPIO
  58
  59 #define CONFIG_HARD_SPI
  60 #define CONFIG_MXC_SPI
  61 #define CONFIG_DEFAULT_SPI_BUS  1
  62 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
  63
  64 /* PMIC Controller */
  65 #define CONFIG_POWER
  66 #define CONFIG_POWER_SPI
  67 #define CONFIG_POWER_FSL
  68 #define CONFIG_FSL_PMIC_BUS     1
  69 #define CONFIG_FSL_PMIC_CS      2
  70 #define CONFIG_FSL_PMIC_CLK     1000000
  71 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  72 #define CONFIG_FSL_PMIC_BITLEN  32
  73 #define CONFIG_RTC_MC13XXX
  74
  75 /* allow to overwrite serial and ethaddr */
  76 #define CONFIG_ENV_OVERWRITE
  77 #define CONFIG_CONS_INDEX               1
  78 #define CONFIG_BAUDRATE                 115200
  79
  80 /***********************************************************
  81  * Command definition
  82  ***********************************************************/
  83 #define CONFIG_CMD_MII
  84 #define CONFIG_CMD_PING
  85 #define CONFIG_CMD_DHCP
  86 #define CONFIG_CMD_SPI
  87 #define CONFIG_CMD_DATE
  88 #define CONFIG_CMD_NAND
  89 #define CONFIG_CMD_BOOTZ
  90
  91 #define CONFIG_BOARD_LATE_INIT
  92
  93 #define CONFIG_BOOTDELAY        1
  94
  95 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  96         "bootargs_base=setenv bootargs console=ttymxc0,115200\0"        \
  97         "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "       \
  98                 "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"     \
  99         "bootcmd=run bootcmd_net\0"                                     \
 100         "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "     \
 101                 "tftpboot 0x81000000 uImage-mx31; bootm\0"              \
 102         "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; "           \
 103                 "nand erase 0x0 0x40000; "                              \
 104                 "nand write 0x81000000 0x0 0x40000\0"
 105
 106 #define CONFIG_SMC911X
 107 #define CONFIG_SMC911X_BASE     0xB6000000
 108 #define CONFIG_SMC911X_32_BIT
 109
 110 /*
 111  * Miscellaneous configurable options
 112  */
 113 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 114 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 115 /* max number of command args */
 116 #define CONFIG_SYS_MAXARGS      16
 117 /* Boot Argument Buffer Size */
 118 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 119
 120 /* memtest works on */
 121 #define CONFIG_SYS_MEMTEST_START        0x80000000
 122 #define CONFIG_SYS_MEMTEST_END          0x80010000
 123
 124 /* default load address */
 125 #define CONFIG_SYS_LOAD_ADDR            0x81000000
 126
 127 #define CONFIG_CMDLINE_EDITING
 128
 129 /*-----------------------------------------------------------------------
 130  * Physical Memory Map
 131  */
 132 #define CONFIG_NR_DRAM_BANKS    1
 133 #define PHYS_SDRAM_1            CSD0_BASE
 134 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 135 #define CONFIG_BOARD_EARLY_INIT_F
 136
 137 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 138 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 139 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 140 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 141                                                 GENERATED_GBL_DATA_SIZE)
 142 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
 143                                                 CONFIG_SYS_INIT_RAM_SIZE)
 144
 145 /*-----------------------------------------------------------------------
 146  * FLASH and environment organization
 147  */
 148 /* No NOR flash present */
 149 #define CONFIG_SYS_NO_FLASH
 150
 151 #define CONFIG_ENV_IS_IN_NAND
 152 #define CONFIG_ENV_OFFSET               0x40000
 153 #define CONFIG_ENV_OFFSET_REDUND        0x60000
 154 #define CONFIG_ENV_SIZE                 (128 * 1024)
 155
 156 /*
 157  * NAND driver
 158  */
 159 #define CONFIG_NAND_MXC
 160 #define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
 161 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 162 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 163 #define CONFIG_MXC_NAND_HWECC
 164 #define CONFIG_SYS_NAND_LARGEPAGE
 165
 166 /* NAND configuration for the NAND_SPL */
 167
 168 /* Start copying real U-boot from the second page */
 169 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 170 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x3f800
 171 /* Load U-Boot to this address */
 172 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 173 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 174
 175 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 176 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 177 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 178 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 179 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 180
 181
 182 /* Configuration of lowlevel_init.S (clocks and SDRAM) */
 183 #define CCM_CCMR_SETUP          0x074B0BF5
 184 #define CCM_PDR0_SETUP_532MHZ   (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
 185                                  PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) |    \
 186                                  PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) |    \
 187                                  PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
 188 #define CCM_MPCTL_SETUP_532MHZ  (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) |  \
 189                                  PLL_MFN(12))
 190
 191 #define ESDMISC_MDDR_SETUP      0x00000004
 192 #define ESDMISC_MDDR_RESET_DL   0x0000000c
 193 #define ESDCFG0_MDDR_SETUP      0x006ac73a
 194
 195 #define ESDCTL_ROW_COL          (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
 196 #define ESDCTL_SETTINGS         (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
 197                                  ESDCTL_DSIZ(2) | ESDCTL_BL(1))
 198 #define ESDCTL_PRECHARGE        (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
 199 #define ESDCTL_AUTOREFRESH      (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
 200 #define ESDCTL_LOADMODEREG      (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
 201 #define ESDCTL_RW               ESDCTL_SETTINGS
 202
 203 #endif /* __CONFIG_H */