include/configs/mx31pdk.h

   1 /*
   2  * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
   3  *
   4  * (C) Copyright 2004
   5  * Texas Instruments.
   6  * Richard Woodruff <r-woodruff2@ti.com>
   7  * Kshitij Gupta <kshitij@ti.com>
   8  *
   9  * Configuration settings for the Freescale i.MX31 PDK board.
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_H
  15 #define __CONFIG_H
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 /* High Level Configuration Options */
  20 #define CONFIG_MX31                     /* This is a mx31 */
  21
  22 #define CONFIG_SYS_GENERIC_BOARD
  23
  24 #define CONFIG_DISPLAY_CPUINFO
  25 #define CONFIG_DISPLAY_BOARDINFO
  26
  27 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  28 #define CONFIG_SETUP_MEMORY_TAGS
  29 #define CONFIG_INITRD_TAG
  30
  31 #define CONFIG_MACH_TYPE        MACH_TYPE_MX31_3DS
  32
  33 #define CONFIG_SPL_TARGET       "u-boot-with-spl.bin"
  34 #define CONFIG_SPL_LDSCRIPT     "arch/$(ARCH)/cpu/u-boot-spl.lds"
  35 #define CONFIG_SPL_MAX_SIZE     2048
  36 #define CONFIG_SPL_NAND_SUPPORT
  37 #define CONFIG_SPL_LIBGENERIC_SUPPORT
  38
  39 #define CONFIG_SPL_TEXT_BASE    0x87dc0000
  40 #define CONFIG_SYS_TEXT_BASE    0x87e00000
  41
  42 #ifndef CONFIG_SPL_BUILD
  43 #define CONFIG_SKIP_LOWLEVEL_INIT
  44 #endif
  45
  46 /*
  47  * Size of malloc() pool
  48  */
  49 #define CONFIG_SYS_MALLOC_LEN           (2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
  50
  51 /*
  52  * Hardware drivers
  53  */
  54
  55 #define CONFIG_MXC_UART
  56 #define CONFIG_MXC_UART_BASE    UART1_BASE
  57 #define CONFIG_MXC_GPIO
  58
  59 #define CONFIG_HARD_SPI
  60 #define CONFIG_MXC_SPI
  61 #define CONFIG_DEFAULT_SPI_BUS  1
  62 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
  63
  64 /* PMIC Controller */
  65 #define CONFIG_POWER
  66 #define CONFIG_POWER_SPI
  67 #define CONFIG_POWER_FSL
  68 #define CONFIG_FSL_PMIC_BUS     1
  69 #define CONFIG_FSL_PMIC_CS      2
  70 #define CONFIG_FSL_PMIC_CLK     1000000
  71 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  72 #define CONFIG_FSL_PMIC_BITLEN  32
  73 #define CONFIG_RTC_MC13XXX
  74
  75 /* allow to overwrite serial and ethaddr */
  76 #define CONFIG_ENV_OVERWRITE
  77 #define CONFIG_CONS_INDEX               1
  78 #define CONFIG_BAUDRATE                 115200
  79
  80 /***********************************************************
  81  * Command definition
  82  ***********************************************************/
  83
  84 #include <config_cmd_default.h>
  85
  86 #define CONFIG_CMD_MII
  87 #define CONFIG_CMD_PING
  88 #define CONFIG_CMD_DHCP
  89 #define CONFIG_CMD_SPI
  90 #define CONFIG_CMD_DATE
  91 #define CONFIG_CMD_NAND
  92 #define CONFIG_CMD_BOOTZ
  93
  94 /*
  95  * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require
  96  * that CFG_NO_FLASH is undefined).
  97  */
  98 #undef CONFIG_CMD_IMLS
  99
 100 #define CONFIG_BOARD_LATE_INIT
 101
 102 #define CONFIG_BOOTDELAY        1
 103
 104 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 105         "bootargs_base=setenv bootargs console=ttymxc0,115200\0"        \
 106         "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "       \
 107                 "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"     \
 108         "bootcmd=run bootcmd_net\0"                                     \
 109         "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "     \
 110                 "tftpboot 0x81000000 uImage-mx31; bootm\0"              \
 111         "prg_uboot=tftpboot 0x81000000 u-boot-with-spl.bin; "           \
 112                 "nand erase 0x0 0x40000; "                              \
 113                 "nand write 0x81000000 0x0 0x40000\0"
 114
 115 #define CONFIG_SMC911X
 116 #define CONFIG_SMC911X_BASE     0xB6000000
 117 #define CONFIG_SMC911X_32_BIT
 118
 119 /*
 120  * Miscellaneous configurable options
 121  */
 122 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 123 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 124 /* Print Buffer Size */
 125 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
 126                                 sizeof(CONFIG_SYS_PROMPT)+16)
 127 /* max number of command args */
 128 #define CONFIG_SYS_MAXARGS      16
 129 /* Boot Argument Buffer Size */
 130 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 131
 132 /* memtest works on */
 133 #define CONFIG_SYS_MEMTEST_START        0x80000000
 134 #define CONFIG_SYS_MEMTEST_END          0x80010000
 135
 136 /* default load address */
 137 #define CONFIG_SYS_LOAD_ADDR            0x81000000
 138
 139 #define CONFIG_CMDLINE_EDITING
 140
 141 /*-----------------------------------------------------------------------
 142  * Physical Memory Map
 143  */
 144 #define CONFIG_NR_DRAM_BANKS    1
 145 #define PHYS_SDRAM_1            CSD0_BASE
 146 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 147 #define CONFIG_BOARD_EARLY_INIT_F
 148
 149 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 150 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 151 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 152 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 153                                                 GENERATED_GBL_DATA_SIZE)
 154 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
 155                                                 CONFIG_SYS_INIT_RAM_SIZE)
 156
 157 /*-----------------------------------------------------------------------
 158  * FLASH and environment organization
 159  */
 160 /* No NOR flash present */
 161 #define CONFIG_SYS_NO_FLASH
 162
 163 #define CONFIG_ENV_IS_IN_NAND
 164 #define CONFIG_ENV_OFFSET               0x40000
 165 #define CONFIG_ENV_OFFSET_REDUND        0x60000
 166 #define CONFIG_ENV_SIZE                 (128 * 1024)
 167
 168 /*
 169  * NAND driver
 170  */
 171 #define CONFIG_NAND_MXC
 172 #define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
 173 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 174 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 175 #define CONFIG_MXC_NAND_HWECC
 176 #define CONFIG_SYS_NAND_LARGEPAGE
 177
 178 /* NAND configuration for the NAND_SPL */
 179
 180 /* Start copying real U-boot from the second page */
 181 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 182 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x3f800
 183 /* Load U-Boot to this address */
 184 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
 185 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 186
 187 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 188 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 189 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 190 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 191 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 192
 193
 194 /* Configuration of lowlevel_init.S (clocks and SDRAM) */
 195 #define CCM_CCMR_SETUP          0x074B0BF5
 196 #define CCM_PDR0_SETUP_532MHZ   (PDR0_CSI_PODF(0x3f) | PDR0_CSI_PRDF(7) | \
 197                                  PDR0_PER_PODF(7) | PDR0_HSP_PODF(3) |    \
 198                                  PDR0_NFC_PODF(5) | PDR0_IPG_PODF(1) |    \
 199                                  PDR0_MAX_PODF(3) | PDR0_MCU_PODF(0))
 200 #define CCM_MPCTL_SETUP_532MHZ  (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) |  \
 201                                  PLL_MFN(12))
 202
 203 #define ESDMISC_MDDR_SETUP      0x00000004
 204 #define ESDMISC_MDDR_RESET_DL   0x0000000c
 205 #define ESDCFG0_MDDR_SETUP      0x006ac73a
 206
 207 #define ESDCTL_ROW_COL          (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
 208 #define ESDCTL_SETTINGS         (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
 209                                  ESDCTL_DSIZ(2) | ESDCTL_BL(1))
 210 #define ESDCTL_PRECHARGE        (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
 211 #define ESDCTL_AUTOREFRESH      (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
 212 #define ESDCTL_LOADMODEREG      (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
 213 #define ESDCTL_RW               ESDCTL_SETTINGS
 214
 215 #endif /* __CONFIG_H */