include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #ifdef CONFIG_BOOT_NAND
  14 #define CONFIG_NAND
  15 #endif
  16
  17 #define CONFIG_NR_DRAM_BANKS            2
  18
  19 #include <configs/ti_omap3_common.h>
  20 #include <asm/mach-types.h>
  21
  22 /*
  23  * Display CPU and Board information
  24  */
  25 #define CONFIG_DISPLAY_CPUINFO          1
  26 #define CONFIG_DISPLAY_BOARDINFO        1
  27
  28 #define CONFIG_MISC_INIT_R
  29
  30 #define CONFIG_REVISION_TAG             1
  31
  32 /* define to enable boot progress via leds */
  33 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
  34     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  35 #define CONFIG_SHOW_BOOT_PROGRESS
  36 #endif
  37
  38 /* GPIO banks */
  39 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
  40 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  41 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  42
  43 /* USB */
  44 #define CONFIG_MUSB_UDC                 1
  45 #define CONFIG_USB_OMAP3                1
  46 #define CONFIG_TWL4030_USB              1
  47
  48 /* USB device configuration */
  49 #define CONFIG_USB_DEVICE               1
  50 #define CONFIG_USB_TTY                  1
  51 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  52
  53 /* Change these to suit your needs */
  54 #define CONFIG_USBD_VENDORID            0x0451
  55 #define CONFIG_USBD_PRODUCTID           0x5678
  56 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  57 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  58
  59 #define CONFIG_CMD_CACHE
  60 #ifdef CONFIG_BOOT_ONENAND
  61 #define CONFIG_CMD_ONENAND      /* ONENAND support              */
  62 #endif
  63 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
  64     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
  65 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
  66 #endif
  67 #define CONFIG_CMD_DHCP
  68 #define CONFIG_CMD_PING
  69 #define CONFIG_CMD_NFS          /* NFS support                  */
  70
  71 /*#undef CONFIG_ENV_IS_NOWHERE*/
  72
  73 #define CONFIG_EXTRA_ENV_SETTINGS \
  74         "usbtty=cdc_acm\0" \
  75         "loadaddr=0x82000000\0" \
  76         "dtbaddr=0x81600000\0" \
  77         "bootdir=/boot\0" \
  78         "bootfile=zImage\0" \
  79         "usbtty=cdc_acm\0" \
  80         "console=ttyO2,115200n8\0" \
  81         "mpurate=auto\0" \
  82         "vram=12M\0" \
  83         "dvimode=1024x768MR-16@60\0" \
  84         "defaultdisplay=dvi\0" \
  85         "mmcdev=0\0" \
  86         "mmcroot=/dev/mmcblk0p2 rw\0" \
  87         "mmcrootfstype=ext4 rootwait\0" \
  88         "nandroot=/dev/mtdblock4 rw\0" \
  89         "nandrootfstype=jffs2\0" \
  90         "mmcargs=setenv bootargs console=${console} " \
  91                 "mpurate=${mpurate} " \
  92                 "vram=${vram} " \
  93                 "omapfb.mode=dvi:${dvimode} " \
  94                 "omapfb.debug=y " \
  95                 "omapdss.def_disp=${defaultdisplay} " \
  96                 "root=${mmcroot} " \
  97                 "rootfstype=${mmcrootfstype}\0" \
  98         "nandargs=setenv bootargs console=${console} " \
  99                 "mpurate=${mpurate} " \
 100                 "vram=${vram} " \
 101                 "omapfb.mode=dvi:${dvimode} " \
 102                 "omapfb.debug=y " \
 103                 "omapdss.def_disp=${defaultdisplay} " \
 104                 "root=${nandroot} " \
 105                 "rootfstype=${nandrootfstype}\0" \
 106         "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 107         "importbootenv=echo Importing environment from mmc ...; " \
 108                 "env import -t $loadaddr $filesize\0" \
 109         "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
 110         "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
 111         "mmcboot=echo Booting from mmc ...; " \
 112                 "run mmcargs; " \
 113                 "bootz ${loadaddr}\0" \
 114         "mmcbootfdt=echo Booting with DT from mmc ...; " \
 115                 "bootz ${loadaddr} - ${dtbaddr}\0" \
 116         "nandboot=echo Booting from onenand ...; " \
 117                 "run nandargs; " \
 118                 "onenand read ${loadaddr} 280000 400000; " \
 119                 "bootz ${loadaddr}\0" \
 120
 121 #define CONFIG_BOOTCOMMAND \
 122         "mmc dev ${mmcdev}; if mmc rescan; then " \
 123                 "echo SD/MMC found on device ${mmcdev};" \
 124                 "if run loadbootenv; then " \
 125                         "run importbootenv;" \
 126                 "fi;" \
 127                 "if test -n $uenvcmd; then " \
 128                         "echo Running uenvcmd ...;" \
 129                         "run uenvcmd;" \
 130                 "fi;" \
 131                 "if run loadzimage; then " \
 132                         "if test -n $dtbfile; then " \
 133                                 "if run loadfdt; then " \
 134                                         "run mmcbootfdt;" \
 135                                 "fi;" \
 136                         "fi;" \
 137                         "run mmcboot;" \
 138                 "fi;" \
 139         "fi;" \
 140         "run nandboot;" \
 141
 142 /*
 143  * FLASH and environment organization
 144  */
 145
 146 #ifdef CONFIG_BOOT_ONENAND
 147 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 148
 149 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 150
 151 #define CONFIG_ENV_IS_IN_ONENAND        1
 152 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 153 #define CONFIG_ENV_ADDR                 ONENAND_ENV_OFFSET
 154 #endif
 155
 156 #ifdef CONFIG_NAND
 157 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 158 #define CONFIG_ENV_IS_IN_NAND           1
 159 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 160 #define CONFIG_ENV_ADDR                 NAND_ENV_OFFSET
 161 #endif
 162
 163 /*
 164  * SMSC911x Ethernet
 165  */
 166 #if defined(CONFIG_CMD_NET)
 167 #define CONFIG_SMC911X
 168 #define CONFIG_SMC911X_32_BIT
 169 #define CONFIG_SMC911X_BASE     0x2C000000
 170 #endif /* (CONFIG_CMD_NET) */
 171
 172 /* OneNAND boot config */
 173 #ifdef CONFIG_BOOT_ONENAND
 174 #define CONFIG_SPL_ONENAND_SUPPORT
 175 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 176 #define CONFIG_SYS_ONENAND_PAGE_SIZE    2048
 177 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
 178 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
 179         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
 180
 181 #endif
 182
 183 /* NAND boot config */
 184 #ifdef CONFIG_NAND
 185 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
 186 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 187 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 188 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 189 #define CONFIG_SYS_NAND_OOBSIZE         64
 190 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 191 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 192 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 193                                                 10, 11, 12, 13}
 194 #define CONFIG_SYS_NAND_ECCSIZE         512
 195 #define CONFIG_SYS_NAND_ECCBYTES        3
 196 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 197 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 198 /* NAND: SPL falcon mode configs */
 199 #ifdef CONFIG_SPL_OS_BOOT
 200 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
 201 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 202 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 203 #endif
 204 #endif
 205
 206 #endif /* __IGEP00X0_H */