]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/qemu-mips.h
arm/rpi: Enable dcache
[karo-tx-uboot.git] / include / configs / qemu-mips.h
1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * This file contains the configuration parameters for qemu-mips target.
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 #define CONFIG_QEMU_MIPS
16
17 #define CONFIG_DISPLAY_BOARDINFO
18 #define CONFIG_MISC_INIT_R
19
20 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
21
22 #define CONFIG_BAUDRATE         115200
23
24 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
25 #undef CONFIG_BOOTARGS
26
27 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
28         "addmisc=setenv bootargs ${bootargs} "                          \
29                 "console=ttyS0,${baudrate} "                            \
30                 "panic=1\0"                                             \
31         "bootfile=/tftpboot/vmlinux\0"                          \
32         "load=tftp 80500000 ${u-boot}\0"                                \
33         ""
34
35 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
36
37 /*
38  * BOOTP options
39  */
40 #define CONFIG_BOOTP_BOOTFILESIZE
41 #define CONFIG_BOOTP_BOOTPATH
42 #define CONFIG_BOOTP_GATEWAY
43 #define CONFIG_BOOTP_HOSTNAME
44
45 /*
46  * Command line configuration.
47  */
48 #define CONFIG_CMD_ELF
49 #define CONFIG_CMD_FAT
50 #define CONFIG_CMD_EXT2
51 #define CONFIG_CMD_DHCP
52
53 #define CONFIG_DRIVER_NE2000
54 #define CONFIG_DRIVER_NE2000_BASE       0xb4000300
55
56 #define CONFIG_SYS_NS16550
57 #define CONFIG_SYS_NS16550_SERIAL
58 #define CONFIG_SYS_NS16550_REG_SIZE     1
59 #define CONFIG_SYS_NS16550_CLK          115200
60 #define CONFIG_SYS_NS16550_COM1         0xb40003f8
61 #define CONFIG_CONS_INDEX               1
62
63 #define CONFIG_CMD_IDE
64 #define CONFIG_DOS_PARTITION
65
66 #define CONFIG_SYS_IDE_MAXBUS           2
67 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
68 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
69 #define CONFIG_SYS_ATA_DATA_OFFSET      0
70 #define CONFIG_SYS_ATA_REG_OFFSET       0
71 #define CONFIG_SYS_ATA_BASE_ADDR        0xb4000000
72
73 #define CONFIG_SYS_IDE_MAXDEVICE        4
74
75 /*
76  * Miscellaneous configurable options
77  */
78 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
79
80 /* Monitor Command Prompt */
81 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
82 #define CONFIG_SYS_PROMPT               "qemu-mipsel # "
83 #else
84 #define CONFIG_SYS_PROMPT               "qemu-mips # "
85 #endif
86
87 #define CONFIG_AUTO_COMPLETE
88 #define CONFIG_CMDLINE_EDITING
89 #define CONFIG_SYS_HUSH_PARSER
90
91 /* Console I/O Buffer Size */
92 #define CONFIG_SYS_CBSIZE               256
93 /* Print Buffer Size */
94 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
95 /* max number of command args */
96 #define CONFIG_SYS_MAXARGS              16
97
98 #define CONFIG_SYS_MALLOC_LEN           128*1024
99
100 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
101
102 #define CONFIG_SYS_MHZ                  132
103
104 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
105
106 /* Cached addr */
107 #define CONFIG_SYS_SDRAM_BASE           0x80000000
108
109 /* default load address */
110 #define CONFIG_SYS_LOAD_ADDR            0x81000000
111
112 #define CONFIG_SYS_MEMTEST_START        0x80100000
113 #define CONFIG_SYS_MEMTEST_END          0x80800000
114
115 /*-----------------------------------------------------------------------
116  * FLASH and environment organization
117  */
118 /* The following #defines are needed to get flash environment right */
119 #define CONFIG_SYS_TEXT_BASE            0xbfc00000 /* Rom version */
120 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
121 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
122
123 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
124
125 /* We boot from this flash, selected with dip switch */
126 #define CONFIG_SYS_FLASH_BASE           0xbfc00000
127 #define CONFIG_SYS_MAX_FLASH_BANKS      1
128 #define CONFIG_SYS_MAX_FLASH_SECT       128
129 #define CONFIG_SYS_FLASH_CFI
130 #define CONFIG_FLASH_CFI_DRIVER
131 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
132
133 #define CONFIG_ENV_IS_IN_FLASH
134 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
135
136 /* Address and size of Primary Environment Sector */
137 #define CONFIG_ENV_SIZE         0x8000
138
139 #define CONFIG_ENV_OVERWRITE    1
140
141 #define MEM_SIZE                128
142
143 #define CONFIG_LZMA
144
145 /*-----------------------------------------------------------------------
146  * Cache Configuration
147  */
148 #define CONFIG_SYS_DCACHE_SIZE          16384
149 #define CONFIG_SYS_ICACHE_SIZE          16384
150 #define CONFIG_SYS_CACHELINE_SIZE       32
151
152 #endif /* __CONFIG_H */