]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/qemu-mips64.h
kconfig: add config option for shell prompt
[karo-tx-uboot.git] / include / configs / qemu-mips64.h
1 /*
2  * (C) Copyright 2003
3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * This file contains the configuration parameters for qemu-mips64 target.
10  */
11
12 #ifndef __CONFIG_H
13 #define __CONFIG_H
14
15 #define CONFIG_QEMU_MIPS
16
17 #define CONFIG_DISPLAY_BOARDINFO
18 #define CONFIG_MISC_INIT_R
19
20 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
21
22 #define CONFIG_BAUDRATE         115200
23
24 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
25 #undef CONFIG_BOOTARGS
26
27 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
28         "addmisc=setenv bootargs ${bootargs} "                          \
29                 "console=ttyS0,${baudrate} "                            \
30                 "panic=1\0"                                             \
31         "bootfile=/tftpboot/vmlinux\0"                                  \
32         "load=tftp ffffffff80500000 ${u-boot}\0"                        \
33         ""
34
35 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
36
37 /*
38  * BOOTP options
39  */
40 #define CONFIG_BOOTP_BOOTFILESIZE
41 #define CONFIG_BOOTP_BOOTPATH
42 #define CONFIG_BOOTP_GATEWAY
43 #define CONFIG_BOOTP_HOSTNAME
44
45 /*
46  * Command line configuration.
47  */
48 #define CONFIG_CMD_ELF
49 #define CONFIG_CMD_FAT
50 #define CONFIG_CMD_EXT2
51 #define CONFIG_CMD_DHCP
52
53 #define CONFIG_DRIVER_NE2000
54 #define CONFIG_DRIVER_NE2000_BASE       0xffffffffb4000300
55
56 #define CONFIG_SYS_NS16550
57 #define CONFIG_SYS_NS16550_SERIAL
58 #define CONFIG_SYS_NS16550_REG_SIZE     1
59 #define CONFIG_SYS_NS16550_CLK          115200
60 #define CONFIG_SYS_NS16550_COM1         0xffffffffb40003f8
61 #define CONFIG_CONS_INDEX               1
62
63 #define CONFIG_CMD_IDE
64 #define CONFIG_DOS_PARTITION
65
66 #define CONFIG_SYS_IDE_MAXBUS           2
67 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
68 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
69 #define CONFIG_SYS_ATA_DATA_OFFSET      0
70 #define CONFIG_SYS_ATA_REG_OFFSET       0
71 #define CONFIG_SYS_ATA_BASE_ADDR        0xffffffffb4000000
72
73 #define CONFIG_SYS_IDE_MAXDEVICE        4
74
75 #define CONFIG_CMD_RARP
76
77 /*
78  * Miscellaneous configurable options
79  */
80 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
81
82 /* Monitor Command Prompt */
83 #undef CONFIG_SYS_PROMPT
84 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
85 #define CONFIG_SYS_PROMPT               "qemu-mips64el # "
86 #else
87 #define CONFIG_SYS_PROMPT               "qemu-mips64 # "
88 #endif
89
90 #define CONFIG_AUTO_COMPLETE
91 #define CONFIG_CMDLINE_EDITING
92 #define CONFIG_SYS_HUSH_PARSER
93
94 /* Console I/O Buffer Size */
95 #define CONFIG_SYS_CBSIZE               256
96 /* Print Buffer Size */
97 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
98 /* max number of command args */
99 #define CONFIG_SYS_MAXARGS              16
100
101 #define CONFIG_SYS_MALLOC_LEN           128*1024
102
103 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
104
105 #define CONFIG_SYS_MHZ                  132
106
107 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
108
109 /* Cached addr */
110 #define CONFIG_SYS_SDRAM_BASE           0xffffffff80000000
111
112 /* default load address */
113 #define CONFIG_SYS_LOAD_ADDR            0xffffffff81000000
114
115 #define CONFIG_SYS_MEMTEST_START        0xffffffff80100000
116 #define CONFIG_SYS_MEMTEST_END          0xffffffff80800000
117
118 /*-----------------------------------------------------------------------
119  * FLASH and environment organization
120  */
121 /* The following #defines are needed to get flash environment right */
122 #define CONFIG_SYS_TEXT_BASE            0xffffffffbfc00000 /* Rom version */
123 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
124 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
125
126 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
127
128 /* We boot from this flash, selected with dip switch */
129 #define CONFIG_SYS_FLASH_BASE           0xffffffffbfc00000
130 #define CONFIG_SYS_MAX_FLASH_BANKS      1
131 #define CONFIG_SYS_MAX_FLASH_SECT       128
132 #define CONFIG_SYS_FLASH_CFI
133 #define CONFIG_FLASH_CFI_DRIVER
134 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
135
136 #define CONFIG_ENV_IS_IN_FLASH
137 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
138
139 /* Address and size of Primary Environment Sector */
140 #define CONFIG_ENV_SIZE         0x8000
141
142 #define CONFIG_ENV_OVERWRITE    1
143
144 #define MEM_SIZE                128
145
146 #define CONFIG_LZMA
147
148 /*-----------------------------------------------------------------------
149  * Cache Configuration
150  */
151 #define CONFIG_SYS_DCACHE_SIZE          16384
152 #define CONFIG_SYS_ICACHE_SIZE          16384
153 #define CONFIG_SYS_CACHELINE_SIZE       32
154
155 #endif /* __CONFIG_H */