include/configs/snowball.h

   1 /*
   2  * Copyright (C) ST-Ericsson SA 2009
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 /*
  11  * #define DEBUG 1
  12  */
  13
  14 #define CONFIG_SKIP_LOWLEVEL_INIT
  15 #define CONFIG_SNOWBALL
  16 #define CONFIG_SYS_ICACHE_OFF
  17 #define CONFIG_SYS_DCACHE_OFF
  18 #define CONFIG_ARCH_CPU_INIT
  19 #define CONFIG_BOARD_LATE_INIT
  20
  21 /*
  22  * High Level Configuration Options
  23  * (easy to change)
  24  */
  25 #define CONFIG_U8500
  26
  27 #define CONFIG_SYS_MEMTEST_START        0x00000000
  28 #define CONFIG_SYS_MEMTEST_END  0x1FFFFFFF
  29
  30 /*-----------------------------------------------------------------------
  31  * Size of environment and malloc() pool
  32  */
  33 /*
  34  * If you use U-Boot as crash kernel, make sure that it does not overwrite
  35  * information saved by kexec during panic. Kexec expects the start
  36  * address of the executable 32K above "crashkernel" address.
  37  */
  38 /*
  39  * Size of malloc() pool
  40  */
  41 #define CONFIG_ENV_SIZE         (8*1024)
  42 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + 256*1024)
  43
  44 #define CONFIG_ENV_IS_IN_MMC
  45 #define CONFIG_CMD_ENV
  46 #define CONFIG_ENV_OFFSET               0x0118000
  47 #define CONFIG_SYS_MMC_ENV_DEV          0              /* SLOT2: eMMC */
  48
  49 /*
  50  * PL011 Configuration
  51  */
  52 #define CONFIG_PL011_SERIAL
  53 #define CONFIG_PL011_SERIAL_RLCR
  54 #define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
  55
  56 /*
  57  * U8500 UART registers base for 3 serial devices
  58  */
  59 #define CFG_UART0_BASE          0x80120000
  60 #define CFG_UART1_BASE          0x80121000
  61 #define CFG_UART2_BASE          0x80007000
  62 #define CFG_SERIAL0             CFG_UART0_BASE
  63 #define CFG_SERIAL1             CFG_UART1_BASE
  64 #define CFG_SERIAL2             CFG_UART2_BASE
  65 #define CONFIG_PL011_CLOCK      38400000
  66 #define CONFIG_PL01x_PORTS      { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
  67                                   (void *)CFG_SERIAL2 }
  68 #define CONFIG_CONS_INDEX       2
  69 #define CONFIG_BAUDRATE         115200
  70
  71 /*
  72  * Devices and file systems
  73  */
  74 #define CONFIG_MMC
  75 #define CONFIG_GENERIC_MMC
  76 #define CONFIG_DOS_PARTITION
  77
  78 /*
  79  * Commands
  80  */
  81 #define CONFIG_CMD_MMC
  82 #define CONFIG_CMD_FAT
  83 #define CONFIG_CMD_EXT2
  84
  85 #ifndef CONFIG_BOOTDELAY
  86 #define CONFIG_BOOTDELAY        1
  87 #endif
  88 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* check for keypress on bootdelay==0 */
  89
  90 #undef CONFIG_BOOTARGS
  91 #define CONFIG_BOOTCOMMAND \
  92 "mmc dev 1; "                                                           \
  93         "if run loadbootscript; "                                       \
  94                 "then run bootscript; "                                 \
  95         "else "                                                         \
  96                 "if run mmcload; "                                      \
  97                         "then run mmcboot; "                            \
  98                 "else "                                                 \
  99                         "mmc dev 0; "                                   \
 100                         "if run emmcloadbootscript; "                   \
 101                                 "then run bootscript; "                 \
 102                         "else "                                         \
 103                                 "if run emmcload; "                     \
 104                                         "then run emmcboot; "           \
 105                                 "else "                                 \
 106                                         "echo No media to boot from; "  \
 107                                 "fi; "                                  \
 108                         "fi; "                                          \
 109                 "fi; "                                                  \
 110         "fi; "
 111
 112 #define CONFIG_EXTRA_ENV_SETTINGS \
 113         "verify=n\0"                                                    \
 114         "loadaddr=0x00100000\0"                                         \
 115         "console=ttyAMA2,115200n8\0"                                    \
 116         "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0"         \
 117         "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0"     \
 118         "bootscript=echo Running bootscript "                           \
 119                 "from mmc ...; source ${loadaddr}\0"                    \
 120         "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M "          \
 121                 "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0"   \
 122         "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M "        \
 123                 "mem=64M@160M mem_mali=32M@224M "                       \
 124                 "pmem_hwb=128M@256M mem=128M@384M\0"                    \
 125         "memargs1024=mem=128M@0 mali.mali_mem=32M@128M "                \
 126                 "hwmem=168M@M160M mem=48M@328M "                        \
 127                 "mem_issw=1M@383M mem=640M@384M\0"                      \
 128         "memargs=setenv bootargs ${bootargs} ${memargs1024}\0"          \
 129         "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0"                 \
 130         "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0"                  \
 131         "commonargs=setenv bootargs console=${console} "                \
 132         "vmalloc=300M\0"                                                \
 133         "emmcargs=setenv bootargs ${bootargs} "                         \
 134                 "root=/dev/mmcblk0p3 "                                  \
 135                 "rootwait\0"                                            \
 136         "addcons=setenv bootargs ${bootargs} "                          \
 137                 "console=${console}\0"                                  \
 138         "emmcboot=echo Booting from eMMC ...; "                         \
 139                 "run commonargs emmcargs memargs; "                     \
 140                 "bootm ${loadaddr}\0"                                   \
 141         "mmcargs=setenv bootargs ${bootargs} "                          \
 142                 "root=/dev/mmcblk1p2 "                                  \
 143                 "rootwait earlyprintk\0"                                \
 144         "mmcboot=echo Booting from external MMC ...; "                  \
 145                 "run commonargs mmcargs memargs; "                      \
 146                 "bootm ${loadaddr}\0"                                   \
 147         "fdt_high=0x2BC00000\0"                                         \
 148         "stdout=serial,usbtty\0"                                        \
 149         "stdin=serial,usbtty\0"                                         \
 150         "stderr=serial,usbtty\0"
 151
 152 /*-----------------------------------------------------------------------
 153  * Miscellaneous configurable options
 154  */
 155
 156 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 157 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size  */
 158
 159 /* Print Buffer Size */
 160 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE \
 161                                         + sizeof(CONFIG_SYS_PROMPT) + 16)
 162 #define CONFIG_SYS_MAXARGS      32      /* max number of command args */
 163 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
 164
 165 #define CONFIG_SYS_LOAD_ADDR            0x00100000 /* default load address */
 166 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1
 167
 168 #define CONFIG_SYS_HUSH_PARSER          1
 169 #define CONFIG_CMDLINE_EDITING
 170
 171 #define CONFIG_SETUP_MEMORY_TAGS        2
 172 #define CONFIG_INITRD_TAG               1
 173 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs  */
 174
 175 /*
 176  * Physical Memory Map
 177  */
 178 #define CONFIG_NR_DRAM_BANKS            1
 179 #define PHYS_SDRAM_1                    0x00000000      /* DDR-SDRAM Bank #1 */
 180
 181 /*
 182  * additions for new relocation code
 183  */
 184 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 185 #define CONFIG_SYS_MAX_RAM_SIZE 0x40000000
 186 #define CONFIG_SYS_INIT_RAM_SIZE        0x100000
 187 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_SDRAM_BASE + \
 188                                          CONFIG_SYS_INIT_RAM_SIZE - \
 189                                          GENERATED_GBL_DATA_SIZE)
 190 #define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SYS_GBL_DATA_OFFSET
 191
 192 /* landing address before relocation */
 193 #ifndef CONFIG_SYS_TEXT_BASE
 194 #define CONFIG_SYS_TEXT_BASE            0x0
 195 #endif
 196
 197 /*
 198  * MMC related configs
 199  */
 200 #define CONFIG_ARM_PL180_MMCI
 201 #define MMC_BLOCK_SIZE                  512
 202 #define CFG_EMMC_BASE                   0x80114000
 203 #define CFG_MMC_BASE                    0x80126000
 204
 205 /*
 206  * FLASH and environment organization
 207  */
 208 #define CONFIG_SYS_NO_FLASH
 209
 210 /*
 211  * base register values for U8500
 212  */
 213 #define CFG_PRCMU_BASE          0x80157000      /* Power, reset and clock */
 214
 215
 216 /*
 217  * U8500 GPIO register base for 9 banks
 218  */
 219 #define CONFIG_DB8500_GPIO
 220 #define CFG_GPIO_0_BASE                 0x8012E000
 221 #define CFG_GPIO_1_BASE                 0x8012E080
 222 #define CFG_GPIO_2_BASE                 0x8000E000
 223 #define CFG_GPIO_3_BASE                 0x8000E080
 224 #define CFG_GPIO_4_BASE                 0x8000E100
 225 #define CFG_GPIO_5_BASE                 0x8000E180
 226 #define CFG_GPIO_6_BASE                 0x8011E000
 227 #define CFG_GPIO_7_BASE                 0x8011E080
 228 #define CFG_GPIO_8_BASE                 0xA03FE000
 229
 230 #define CFG_FSMC_BASE           0x80000000      /* FSMC Controller */
 231
 232 #endif  /* __CONFIG_H */