include/configs/tx28.h

   1 /*
   2  * Copyright (C) 2012 <LW@KARO-electronics.de>
   3  *
   4  * SPDX-License-Identifier:      GPL-2.0
   5  *
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #define CONFIG_MX28                     /* must be defined before including regs-base.h */
  12
  13 #include <asm/sizes.h>
  14 #include <asm/arch/regs-base.h>
  15
  16 /*
  17  * Ka-Ro TX28 board - SoC configuration
  18  */
  19 #define CONFIG_MXS_GPIO                                 /* GPIO control */
  20 #define CONFIG_SYS_HZ                   1000            /* Ticks per second */
  21 #define PHYS_SDRAM_1_SIZE               CONFIG_SDRAM_SIZE
  22 #ifdef CONFIG_TX28_S
  23 #define TX28_MOD_SUFFIX                 "1"
  24 #else
  25 #define CONFIG_SYS_SPL_FIXED_BATT_SUPPLY
  26 #define TX28_MOD_SUFFIX                 "0"
  27 #endif
  28
  29 #ifndef CONFIG_SPL_BUILD
  30 #define CONFIG_SKIP_LOWLEVEL_INIT
  31 #define CONFIG_SHOW_ACTIVITY
  32 #define CONFIG_ARCH_CPU_INIT
  33 #define CONFIG_ARCH_MISC_INIT           /* init vector table after relocation */
  34 #define CONFIG_DISPLAY_CPUINFO
  35 #define CONFIG_DISPLAY_BOARDINFO
  36 #define CONFIG_BOARD_LATE_INIT
  37 #define CONFIG_BOARD_EARLY_INIT_F
  38
  39 /* LCD Logo and Splash screen support */
  40 #define CONFIG_LCD
  41 #ifdef CONFIG_LCD
  42 #define CONFIG_SPLASH_SCREEN
  43 #define CONFIG_SPLASH_SCREEN_ALIGN
  44 #define CONFIG_VIDEO_MXS
  45 #define CONFIG_LCD_LOGO
  46 #define LCD_BPP                         LCD_COLOR24
  47 #define CONFIG_CMD_BMP
  48 #define CONFIG_VIDEO_BMP_RLE8
  49 #endif /* CONFIG_LCD */
  50 #endif /* CONFIG_SPL_BUILD */
  51
  52 /*
  53  * Memory configuration options
  54  */
  55 #define CONFIG_NR_DRAM_BANKS            1               /* 1 bank of SDRAM */
  56 #define PHYS_SDRAM_1                    0x40000000      /* SDRAM Bank #1 */
  57 #define CONFIG_STACKSIZE                SZ_64K
  58 #define CONFIG_SYS_MALLOC_LEN           SZ_4M
  59 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1    /* Memtest start address */
  60 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_4M)
  61
  62 /*
  63  * U-Boot general configurations
  64  */
  65 #define CONFIG_SYS_LONGHELP
  66 #define CONFIG_SYS_PROMPT               "TX28 U-Boot > "
  67 #define CONFIG_SYS_CBSIZE               2048            /* Console I/O buffer size */
  68 #define CONFIG_SYS_PBSIZE \
  69         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  70                                                         /* Print buffer size */
  71 #define CONFIG_SYS_MAXARGS              256             /* Max number of command args */
  72 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  73                                         /* Boot argument buffer size */
  74 #define CONFIG_VERSION_VARIABLE         /* U-BOOT version */
  75 #define CONFIG_AUTO_COMPLETE            /* Command auto complete */
  76 #define CONFIG_CMDLINE_EDITING          /* Command history etc */
  77
  78 #define CONFIG_SYS_64BIT_VSPRINTF
  79 #define CONFIG_SYS_NO_FLASH
  80
  81 /*
  82  * Flattened Device Tree (FDT) support
  83 */
  84 #define CONFIG_OF_LIBFDT
  85 #ifdef CONFIG_OF_LIBFDT
  86 #define CONFIG_FDT_FIXUP_PARTITIONS
  87 #define CONFIG_OF_BOARD_SETUP
  88 #define CONFIG_SYS_FDT_ADDR             (PHYS_SDRAM_1 + SZ_16M)
  89 #endif
  90
  91 /*
  92  * Boot Linux
  93  */
  94 #define xstr(s)                         str(s)
  95 #define str(s)                          #s
  96 #define __pfx(x, s)                     (x##s)
  97 #define _pfx(x, s)                      __pfx(x, s)
  98
  99 #define CONFIG_CMDLINE_TAG
 100 #define CONFIG_SETUP_MEMORY_TAGS
 101 #define CONFIG_BOOTDELAY                3
 102 #define CONFIG_ZERO_BOOTDELAY_CHECK
 103 #define CONFIG_SYS_AUTOLOAD             "no"
 104 #define CONFIG_BOOTFILE                 "uImage"
 105 #define CONFIG_BOOTARGS                 "console=ttyAMA0,115200 ro debug panic=1"
 106 #define CONFIG_BOOTCOMMAND              "run bootcmd_nand"
 107 #define CONFIG_LOADADDR                 43000000
 108 #define CONFIG_SYS_LOAD_ADDR            _pfx(0x, CONFIG_LOADADDR)
 109 #define CONFIG_U_BOOT_IMG_SIZE          SZ_1M
 110
 111 /*
 112  * Extra Environments
 113  */
 114 #ifdef CONFIG_ENV_IS_NOWHERE
 115 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 116         "autostart=no\0"                                                \
 117         "autoload=no\0"                                                 \
 118         "bootdelay=-1\0"                                                \
 119         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 120         "mtdparts=" MTDPARTS_DEFAULT "\0"
 121 #else
 122 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 123         "autostart=no\0"                                                \
 124         "baseboard=stk5-v3\0"                                           \
 125         "bootargs_mmc=run default_bootargs;set bootargs ${bootargs}"    \
 126         " root=/dev/mmcblk0p3 rootwait\0"                               \
 127         "bootargs_nand=run default_bootargs;set bootargs ${bootargs}"   \
 128         " root=/dev/mtdblock3 rootfstype=jffs2\0"                       \
 129         "bootargs_nfs=run default_bootargs;set bootargs ${bootargs}"    \
 130         " root=/dev/nfs ip=dhcp nfsroot=${nfs_server}:${nfsroot},nolock\0" \
 131         "bootcmd_mmc=set autostart no;run bootargs_mmc"                 \
 132         ";fatload mmc 0 ${loadaddr} uImage;run bootm_cmd\0"             \
 133         "bootcmd_nand=set autostart no;run bootargs_nand"               \
 134         ";nboot linux;run bootm_cmd\0"                                  \
 135         "bootcmd_net=set autostart no;run bootargs_nfs;dhcp"            \
 136         ";run bootm_cmd\0"                                              \
 137         "bootm_cmd=bootm ${loadaddr} - ${fdtaddr}\0"                    \
 138         "default_bootargs=set bootargs " CONFIG_BOOTARGS                \
 139         " ${append_bootargs}\0"                                         \
 140         "fdtaddr=41000000\0"                                            \
 141         "fdtsave=fdt resize;nand erase.part dtb"                        \
 142         ";nand write ${fdtaddr} dtb ${fdtsize}\0"                       \
 143         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 144         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 145         "nfsroot=/tftpboot/rootfs\0"                                    \
 146         "otg_mode=device\0"                                             \
 147         "touchpanel=tsc2007\0"                                          \
 148         "video_mode=VGA\0"
 149 #endif /*  CONFIG_ENV_IS_NOWHERE */
 150
 151 #define MTD_NAME                        "gpmi-nand"
 152 #define MTDIDS_DEFAULT                  "nand0=" MTD_NAME
 153
 154 /*
 155  * U-Boot Commands
 156  */
 157 #include <config_cmd_default.h>
 158 #define CONFIG_CMD_CACHE
 159 #define CONFIG_CMD_MMC
 160 #define CONFIG_CMD_NAND
 161 #define CONFIG_CMD_MTDPARTS
 162 #define CONFIG_CMD_BOOTCE
 163 #define CONFIG_CMD_TIME
 164 #define CONFIG_CMD_MEMTEST
 165
 166 /*
 167  * Serial Driver
 168  */
 169 #define CONFIG_PL011_SERIAL
 170 #define CONFIG_PL011_CLOCK              24000000
 171 #define CONFIG_PL01x_PORTS      {       \
 172         (void *)MXS_UARTDBG_BASE,       \
 173         }
 174 #define CONFIG_CONS_INDEX               0               /* do not change! */
 175 #define CONFIG_BAUDRATE                 115200          /* Default baud rate */
 176 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, }
 177 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 178
 179 /*
 180  * Ethernet Driver
 181  */
 182 #define CONFIG_FEC_MXC
 183 #ifdef CONFIG_FEC_MXC
 184 /* This is required for the FEC driver to work with cache enabled */
 185 #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
 186 #define CONFIG_SYS_CACHELINE_SIZE       32
 187
 188 #ifndef CONFIG_TX28_S
 189 #define CONFIG_FEC_MXC_MULTI
 190 #else
 191 #define IMX_FEC_BASE                    MXS_ENET0_BASE
 192 #define CONFIG_FEC_MXC_PHYADDR          0x00
 193 #endif
 194
 195 #define CONFIG_PHY_SMSC
 196 #define CONFIG_PHYLIB
 197 #define CONFIG_MII
 198 #define CONFIG_FEC_XCV_TYPE             RMII
 199 #define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
 200 #define CONFIG_NET_MULTI
 201 #define CONFIG_CMD_MII
 202 #define CONFIG_CMD_DHCP
 203 #define CONFIG_CMD_PING
 204 /* Add for working with "strict" DHCP server */
 205 #define CONFIG_BOOTP_SUBNETMASK
 206 #define CONFIG_BOOTP_GATEWAY
 207 #define CONFIG_BOOTP_DNS
 208 #define CONFIG_BOOTP_RANDOM_ID
 209 #endif
 210
 211 #ifndef CONFIG_ENV_IS_NOWHERE
 212 /* define one of the following options:
 213 #define CONFIG_ENV_IS_IN_NAND
 214 #define CONFIG_ENV_IS_IN_MMC
 215 */
 216 #define CONFIG_ENV_IS_IN_NAND
 217 #endif
 218 #define CONFIG_ENV_OVERWRITE
 219
 220 /*
 221  * NAND flash driver
 222  */
 223 #ifdef CONFIG_CMD_NAND
 224 #define CONFIG_MTD_DEVICE
 225 #define CONFIG_NAND_MXS
 226 #define CONFIG_APBH_DMA
 227 #define CONFIG_APBH_DMA_BURST
 228 #define CONFIG_APBH_DMA_BURST8
 229 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
 230 #define CONFIG_CMD_NAND_TRIMFFS
 231 #define CONFIG_SYS_MXS_DMA_CHANNEL      4
 232 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 233 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 234 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 235 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 236 #define CONFIG_SYS_NAND_BASE            0x00000000
 237 #define CONFIG_CMD_ROMUPDATE
 238 #else
 239 #undef CONFIG_ENV_IS_IN_NAND
 240 #endif /* CONFIG_CMD_NAND */
 241
 242 #define CONFIG_ENV_OFFSET               (CONFIG_U_BOOT_IMG_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS)
 243 #define CONFIG_ENV_SIZE                 SZ_128K
 244 #define CONFIG_ENV_RANGE                0x60000
 245 #ifdef CONFIG_ENV_OFFSET_REDUND
 246 #define CONFIG_SYS_ENV_PART_STR         xstr(CONFIG_ENV_RANGE)          \
 247         "(env),"                                                        \
 248         xstr(CONFIG_ENV_RANGE)                                          \
 249         "(env2),"
 250 #define CONFIG_SYS_USERFS_PART_STR      "89216k(userfs)"
 251 #else
 252 #define CONFIG_SYS_ENV_PART_STR         xstr(CONFIG_ENV_RANGE)          \
 253         "(env),"
 254 #define CONFIG_SYS_USERFS_PART_STR      "89600k(userfs)"
 255 #endif /* CONFIG_ENV_OFFSET_REDUND */
 256
 257 /*
 258  * MMC Driver
 259  */
 260 #ifdef CONFIG_CMD_MMC
 261 #define CONFIG_MMC
 262 #define CONFIG_GENERIC_MMC
 263 #define CONFIG_MXS_MMC
 264 #define CONFIG_BOUNCE_BUFFER
 265
 266 #define CONFIG_DOS_PARTITION
 267 #define CONFIG_CMD_FAT
 268 #define CONFIG_FAT_WRITE
 269 #define CONFIG_CMD_EXT2
 270
 271 /*
 272  * Environments on MMC
 273  */
 274 #ifdef CONFIG_ENV_IS_IN_MMC
 275 #define CONFIG_SYS_MMC_ENV_DEV          0
 276 #undef CONFIG_ENV_OFFSET
 277 #undef CONFIG_ENV_SIZE
 278 /* Associated with the MMC layout defined in mmcops.c */
 279 #define CONFIG_ENV_OFFSET               SZ_1K
 280 #define CONFIG_ENV_SIZE                 (SZ_128K - CONFIG_ENV_OFFSET)
 281 #define CONFIG_DYNAMIC_MMC_DEVNO
 282 #endif /* CONFIG_ENV_IS_IN_MMC */
 283 #else
 284 #undef CONFIG_ENV_IS_IN_MMC
 285 #endif /* CONFIG_CMD_MMC */
 286
 287 #ifdef CONFIG_ENV_IS_NOWHERE
 288 #undef CONFIG_ENV_SIZE
 289 #define CONFIG_ENV_SIZE                 SZ_4K
 290 #endif
 291
 292 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
 293         "1m@" xstr(CONFIG_SYS_NAND_U_BOOT_OFFS) "(u-boot),"             \
 294         CONFIG_SYS_ENV_PART_STR                                         \
 295         "6m(linux),32m(rootfs),"                                        \
 296         CONFIG_SYS_USERFS_PART_STR ",512k@0x7f00000(dtb),512k@0x7f80000(bbt)ro"
 297
 298 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 299 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
 300                                         GENERATED_GBL_DATA_SIZE)
 301
 302 /* Defines for SPL */
 303 #define CONFIG_SPL
 304 #define CONFIG_SPL_START_S_PATH         "arch/arm/cpu/arm926ejs/mxs"
 305 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
 306 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 307 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 308 #define CONFIG_SPL_SERIAL_SUPPORT
 309 #define CONFIG_SPL_GPIO_SUPPORT
 310 #define CONFIG_SYS_SPL_VDDD_VAL         1500
 311 #define CONFIG_SYS_SPL_BATT_BO_LEVEL    2800
 312 #define CONFIG_SYS_SPL_VDDMEM_VAL       0       /* VDDMEM is not utilized on TX28 */
 313
 314 #endif /* __CONFIGS_TX28_H */