include/configs/tx48.h

   1 /*
   2  * tx48.h
   3  *
   4  * Copyright (C) 2012 Lothar Waßmann <LW@KARO-electronics.de>
   5  *
   6  * based on: am335x_evm
   7  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
   8  *
   9  * SPDX-License-Identifier:      GPL-2.0
  10  *
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #define CONFIG_OMAP
  17 #define CONFIG_AM33XX
  18
  19 #include <asm/sizes.h>
  20 #include <asm/arch/omap.h>
  21
  22 /*
  23  * Ka-Ro TX48 board - SoC configuration
  24  */
  25 #define CONFIG_AM33XX_GPIO
  26 #define CONFIG_SYS_HZ                   1000            /* Ticks per second */
  27
  28 #ifndef CONFIG_SPL_BUILD
  29 #define CONFIG_SKIP_LOWLEVEL_INIT
  30 #define CONFIG_SHOW_ACTIVITY
  31 #define CONFIG_DISPLAY_CPUINFO
  32 #define CONFIG_DISPLAY_BOARDINFO
  33 #define CONFIG_BOARD_LATE_INIT
  34
  35 /* LCD Logo and Splash screen support */
  36 #define CONFIG_LCD
  37 #ifdef CONFIG_LCD
  38 #define CONFIG_SPLASH_SCREEN
  39 #define CONFIG_SPLASH_SCREEN_ALIGN
  40 #define CONFIG_VIDEO_DA8XX
  41 #define DAVINCI_LCD_CNTL_BASE           0x4830e000
  42 #define CONFIG_LCD_LOGO
  43 #define LCD_BPP                         LCD_COLOR24
  44 #define CONFIG_CMD_BMP
  45 #define CONFIG_VIDEO_BMP_RLE8
  46 #endif /* CONFIG_LCD */
  47 #endif /* CONFIG_SPL_BUILD */
  48
  49 /* Clock Defines */
  50 #define V_OSCK                          24000000  /* Clock output from T2 */
  51 #define V_SCLK                          V_OSCK
  52
  53 /*
  54  * Memory configuration options
  55  */
  56 #define CONFIG_SYS_SDRAM_DDR3
  57 #define CONFIG_NR_DRAM_BANKS            1               /*  1 bank of SDRAM */
  58 #define PHYS_SDRAM_1                    0x80000000      /* SDRAM Bank #1 */
  59 #define CONFIG_MAX_RAM_BANK_SIZE        SZ_1G
  60
  61 #define CONFIG_STACKSIZE                SZ_64K
  62 #define CONFIG_SYS_MALLOC_LEN           SZ_4M
  63
  64 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + SZ_64M)
  65 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_8M)
  66
  67 #define CONFIG_SYS_CACHELINE_SIZE       64
  68
  69 /*
  70  * U-Boot general configurations
  71  */
  72 #define CONFIG_SYS_LONGHELP
  73 #define CONFIG_SYS_PROMPT               "TX48 U-Boot > "
  74 #define CONFIG_SYS_CBSIZE               2048            /* Console I/O buffer size */
  75 #define CONFIG_SYS_PBSIZE \
  76         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  77                                                 /* Print buffer size */
  78 #define CONFIG_SYS_MAXARGS              64      /* Max number of command args */
  79 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  80                                                 /* Boot argument buffer size */
  81 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  82 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  83 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  84
  85 #define CONFIG_SYS_64BIT_VSPRINTF
  86 #define CONFIG_SYS_NO_FLASH
  87
  88 /*
  89  * Flattened Device Tree (FDT) support
  90 */
  91 #ifdef CONFIG_OF_LIBFDT /* set via cmdline parameter thru boards.cfg */
  92 #define CONFIG_FDT_FIXUP_PARTITIONS
  93 #define CONFIG_OF_EMBED
  94 #define CONFIG_OF_BOARD_SETUP
  95 #define CONFIG_DEFAULT_DEVICE_TREE      tx48
  96 #define CONFIG_ARCH_DEVICE_TREE         am33xx
  97 #define CONFIG_MACH_TYPE                (-1)
  98 #define CONFIG_SYS_FDT_ADDR             (PHYS_SDRAM_1 + SZ_16M)
  99 #else
 100 #ifndef MACH_TYPE_TIAM335EVM
 101 #define MACH_TYPE_TIAM335EVM            3589     /* Until the next sync */
 102 #endif
 103 #define CONFIG_MACH_TYPE                MACH_TYPE_TIAM335EVM
 104 #endif
 105
 106 /*
 107  * Boot Linux
 108  */
 109 #define xstr(s)                         str(s)
 110 #define str(s)                          #s
 111 #define __pfx(x, s)                     (x##s)
 112 #define _pfx(x, s)                      __pfx(x, s)
 113
 114 #define CONFIG_CMDLINE_TAG
 115 #define CONFIG_SETUP_MEMORY_TAGS
 116 #define CONFIG_BOOTDELAY                3
 117 #define CONFIG_ZERO_BOOTDELAY_CHECK
 118 #define CONFIG_SYS_AUTOLOAD             "no"
 119 #define CONFIG_BOOTFILE                 "uImage"
 120 #define CONFIG_BOOTARGS                 "console=ttyO0,115200 ro debug panic=1"
 121 #define CONFIG_BOOTCOMMAND              "run bootcmd_nand"
 122 #define CONFIG_LOADADDR                 83000000
 123 #define CONFIG_SYS_LOAD_ADDR            _pfx(0x, CONFIG_LOADADDR)
 124 #define CONFIG_U_BOOT_IMG_SIZE          SZ_1M
 125 #define CONFIG_HW_WATCHDOG
 126
 127 /*
 128  * Extra Environments
 129  */
 130 #ifdef CONFIG_OF_LIBFDT
 131 #define TX48_BOOTM_CMD                                                  \
 132         "bootm_cmd=bootm ${loadaddr} - ${fdtaddr}\0"
 133 #define TX48_MTDPARTS_CMD ""
 134 #else
 135 #define TX48_BOOTM_CMD                                                  \
 136         "bootm_cmd=bootm\0"
 137 #define TX48_MTDPARTS_CMD " ${mtdparts}"
 138 #endif
 139
 140 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 141         "autostart=no\0"                                                \
 142         "baseboard=stk5-v3\0"                                           \
 143         "bootargs_mmc=run default_bootargs;set bootargs ${bootargs}"    \
 144         " root=/dev/mmcblk0p2 rootwait\0"                               \
 145         "bootargs_nand=run default_bootargs;set bootargs ${bootargs}"   \
 146         " root=/dev/mtdblock4 rootfstype=jffs2\0"                       \
 147         "nfsroot=/tftpboot/rootfs\0"                                    \
 148         "bootargs_nfs=run default_bootargs;set bootargs ${bootargs}"    \
 149         " root=/dev/nfs ip=dhcp nfsroot=${nfs_server}:${nfsroot},nolock\0"\
 150         "bootcmd_mmc=set autostart no;run bootargs_mmc;"                \
 151         " fatload mmc 0 ${loadaddr} uImage;run bootm_cmd\0"             \
 152         "bootcmd_nand=set autostart no;run bootargs_nand;"              \
 153         " nboot linux;run bootm_cmd\0"                                  \
 154         "bootcmd_net=set autostart no;run bootargs_nfs;dhcp;"           \
 155         " run bootm_cmd\0"                                              \
 156         TX48_BOOTM_CMD                                                  \
 157         "default_bootargs=set bootargs " CONFIG_BOOTARGS                \
 158         TX48_MTDPARTS_CMD                                               \
 159         " ${append_bootargs}\0"                 \
 160         "cpu_clk=" xstr(CONFIG_SYS_MPU_CLK) "\0"                        \
 161         "fdtaddr=81000000\0"                                            \
 162         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 163         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 164         "otg_mode=device\0"                                             \
 165         "touchpanel=tsc2007\0"                                          \
 166         "video_mode=VGA\0"
 167
 168 #define MTD_NAME                        "omap2-nand.0"
 169 #define MTDIDS_DEFAULT                  "nand0=" MTD_NAME
 170
 171 /*
 172  * U-Boot Commands
 173  */
 174 #include <config_cmd_default.h>
 175 #define CONFIG_CMD_CACHE
 176 #define CONFIG_CMD_MMC
 177 #define CONFIG_CMD_NAND
 178 #define CONFIG_CMD_MTDPARTS
 179 #define CONFIG_CMD_BOOTCE
 180 #define CONFIG_CMD_TIME
 181 #define CONFIG_CMD_MEMTEST
 182
 183 /*
 184  * Serial Driver
 185  */
 186 #define CONFIG_SYS_NS16550
 187 #define CONFIG_SYS_NS16550_SERIAL
 188 #define CONFIG_SYS_NS16550_MEM32
 189 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
 190 #define CONFIG_SYS_NS16550_CLK          48000000
 191 #define CONFIG_SYS_NS16550_COM1         0x44e09000      /* UART0 */
 192 #define CONFIG_SYS_NS16550_COM2         0x48022000      /* UART1 */
 193 #define CONFIG_SYS_NS16550_COM6         0x481aa000      /* UART5 */
 194
 195 #define CONFIG_SYS_NS16550_COM3         0x481aa000      /* UART2 */
 196 #define CONFIG_SYS_NS16550_COM4         0x481aa000      /* UART3 */
 197 #define CONFIG_SYS_NS16550_COM5         0x481aa000      /* UART4 */
 198 #define CONFIG_CONS_INDEX               1               /* one based! */
 199 #define CONFIG_BAUDRATE                 115200          /* Default baud rate */
 200 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, }
 201 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 202
 203 /*
 204  * Ethernet Driver
 205  */
 206 #ifdef CONFIG_CMD_NET
 207 #define CONFIG_DRIVER_TI_CPSW
 208 #define CONFIG_NET_MULTI
 209 #define CONFIG_PHY_GIGE
 210 #define CONFIG_PHY_SMSC
 211 #define CONFIG_PHYLIB
 212 #define CONFIG_MII
 213 #define CONFIG_CMD_MII
 214 #define CONFIG_CMD_DHCP
 215 #define CONFIG_CMD_PING
 216 /* Add for working with "strict" DHCP server */
 217 #define CONFIG_BOOTP_SUBNETMASK
 218 #define CONFIG_BOOTP_GATEWAY
 219 #define CONFIG_BOOTP_DNS
 220 #define CONFIG_BOOTP_DNS2
 221 #endif
 222
 223 /*
 224  * NAND flash driver
 225  */
 226 #ifdef CONFIG_CMD_NAND
 227 #define CONFIG_MTD_DEVICE
 228 #define CONFIG_ENV_IS_IN_NAND
 229 #define CONFIG_NAND_OMAP_GPMC
 230 #define GPMC_NAND_ECC_LP_x8_LAYOUT
 231 #define GPMC_NAND_HW_ECC_LAYOUT_KERNEL  GPMC_NAND_HW_ECC_LAYOUT
 232 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x20000
 233 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 234 #define CONFIG_SYS_NAND_OOBSIZE         64
 235 #define CONFIG_SYS_NAND_ECCSIZE         512
 236 #define CONFIG_SYS_NAND_ECCBYTES        14
 237 #define CONFIG_CMD_NAND_TRIMFFS
 238 #define CONFIG_SYS_NAND_MAX_CHIPS       1
 239 #define CONFIG_SYS_NAND_MAXBAD          20 /* Max. number of bad blocks guaranteed by manufacturer */
 240 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 241 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 242 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 243 #ifdef CONFIG_ENV_IS_IN_NAND
 244 #define CONFIG_ENV_OVERWRITE
 245 #define CONFIG_ENV_OFFSET               (CONFIG_U_BOOT_IMG_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS)
 246 #define CONFIG_ENV_SIZE                 SZ_128K
 247 #define CONFIG_ENV_RANGE                0x60000
 248 #endif /* CONFIG_ENV_IS_IN_NAND */
 249 #define CONFIG_SYS_NAND_BASE            0x08000000 /* must be defined but value is irrelevant */
 250 #define NAND_BASE                       CONFIG_SYS_NAND_BASE
 251 #endif /* CONFIG_CMD_NAND */
 252
 253 /*
 254  * MMC Driver
 255  */
 256 #ifdef CONFIG_CMD_MMC
 257 #ifndef CONFIG_ENV_IS_IN_NAND
 258 #define CONFIG_ENV_IS_IN_MMC
 259 #endif
 260 #define CONFIG_MMC
 261 #define CONFIG_GENERIC_MMC
 262 #define CONFIG_OMAP_HSMMC
 263 #define CONFIG_OMAP_MMC_DEV_1
 264
 265 #define CONFIG_DOS_PARTITION
 266 #define CONFIG_CMD_FAT
 267 #define CONFIG_CMD_EXT2
 268
 269 /*
 270  * Environments on MMC
 271  */
 272 #ifdef CONFIG_ENV_IS_IN_MMC
 273 #define CONFIG_SYS_MMC_ENV_DEV          0
 274 #define CONFIG_ENV_OVERWRITE
 275 /* Associated with the MMC layout defined in mmcops.c */
 276 #define CONFIG_ENV_OFFSET               SZ_1K
 277 #define CONFIG_ENV_SIZE                 (SZ_128K - CONFIG_ENV_OFFSET)
 278 #define CONFIG_DYNAMIC_MMC_DEVNO
 279 #endif /* CONFIG_ENV_IS_IN_MMC */
 280 #endif /* CONFIG_CMD_MMC */
 281
 282 #ifdef CONFIG_ENV_OFFSET_REDUND
 283 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
 284         "128k(u-boot-spl),"                                             \
 285         "1m(u-boot),"                                                   \
 286         xstr(CONFIG_ENV_RANGE)                                          \
 287         "(env),"                                                        \
 288         xstr(CONFIG_ENV_RANGE)                                          \
 289         "(env2),4m(linux),16m(rootfs),256k(dtb),107904k(userfs),512k@0x7f80000(bbt)ro"
 290 #else
 291 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
 292         "128k(u-boot-spl),"                                             \
 293         "1m(u-boot),"                                                   \
 294         xstr(CONFIG_ENV_RANGE)                                          \
 295         "(env),4m(linux),16m(rootfs),256k(dtb),108288k(userfs),512k@0x7f80000(bbt)ro"
 296 #endif
 297
 298 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 299 #define SRAM0_SIZE                      SZ_64K
 300 #define OCMC_SRAM_BASE                  0x40300000
 301 #define CONFIG_SPL_STACK                (OCMC_SRAM_BASE + 0xb800)
 302 #define CONFIG_SYS_INIT_SP_ADDR         (PHYS_SDRAM_1 + SZ_32K)
 303
 304  /* Platform/Board specific defs */
 305 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
 306 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 307
 308 /* Defines for SPL */
 309 #define CONFIG_SPL
 310 #define CONFIG_SPL_FRAMEWORK
 311 #define CONFIG_SPL_BOARD_INIT
 312 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - CONFIG_SPL_TEXT_BASE)
 313 #define CONFIG_SPL_GPIO_SUPPORT
 314 #ifdef CONFIG_NAND_OMAP_GPMC
 315 #define CONFIG_SPL_NAND_SUPPORT
 316 #define CONFIG_SPL_NAND_DRIVERS
 317 #define CONFIG_SPL_NAND_BASE
 318 #define CONFIG_SPL_NAND_ECC
 319 #define CONFIG_SPL_NAND_AM33XX_BCH
 320 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 321 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE /   \
 322                                         CONFIG_SYS_NAND_PAGE_SIZE)
 323 #define CONFIG_SYS_NAND_BLOCK_SIZE      SZ_128K
 324 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 325 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 326                                          10, 11, 12, 13, 14, 15, 16, 17, \
 327                                          18, 19, 20, 21, 22, 23, 24, 25, \
 328                                          26, 27, 28, 29, 30, 31, 32, 33, \
 329                                          34, 35, 36, 37, 38, 39, 40, 41, \
 330                                          42, 43, 44, 45, 46, 47, 48, 49, \
 331                                          50, 51, 52, 53, 54, 55, 56, 57, }
 332 #endif
 333
 334 #define CONFIG_SPL_BSS_START_ADDR       PHYS_SDRAM_1
 335 #define CONFIG_SPL_BSS_MAX_SIZE         SZ_512K
 336
 337 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
 338
 339 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 340 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 341 #define CONFIG_SPL_SERIAL_SUPPORT
 342 #define CONFIG_SPL_YMODEM_SUPPORT
 343 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 344
 345 /*
 346  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 347  * 64 bytes before this address should be set aside for u-boot.img's
 348  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 349  * other needs.
 350  */
 351 #define CONFIG_SYS_SPL_MALLOC_START     (PHYS_SDRAM_1 + SZ_2M + SZ_32K)
 352 #define CONFIG_SYS_SPL_MALLOC_SIZE      SZ_1M
 353
 354 #endif  /* __CONFIG_H */