]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/tx6.h
e65436b9523d5a243c84f93614943869994b060f
[karo-tx-uboot.git] / include / configs / tx6.h
1 /*
2  * Copyright (C) 2012 <LW@KARO-electronics.de>
3  *
4  * SPDX-License-Identifier:      GPL-2.0
5  *
6  */
7
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10
11 #include <asm/sizes.h>
12 #include <asm/arch/imx-regs.h>
13
14 /*
15  * Ka-Ro TX6 board - SoC configuration
16  */
17 #define CONFIG_MX6
18 #define CONFIG_SYS_MX6_HCLK             24000000
19 #define CONFIG_SYS_MX6_CLK32            32768
20 #define CONFIG_SYS_HZ                   1000            /* Ticks per second */
21 #define CONFIG_SHOW_ACTIVITY
22 #define CONFIG_ARCH_CPU_INIT
23 #define CONFIG_DISPLAY_BOARDINFO
24 #define CONFIG_BOARD_LATE_INIT
25 #define CONFIG_BOARD_EARLY_INIT_F
26
27 #ifndef CONFIG_MFG
28 /* LCD Logo and Splash screen support */
29 #define CONFIG_LCD
30 #ifdef CONFIG_LCD
31 #define CONFIG_SPLASH_SCREEN
32 #define CONFIG_SPLASH_SCREEN_ALIGN
33 #define CONFIG_VIDEO_IPUV3
34 #define CONFIG_IPUV3_CLK                266000000
35 #define CONFIG_LCD_LOGO
36 #define LCD_BPP                         LCD_COLOR24
37 #define CONFIG_CMD_BMP
38 #define CONFIG_VIDEO_BMP_RLE8
39 #endif /* CONFIG_LCD */
40 #endif /* CONFIG_MFG */
41
42 /*
43  * Memory configuration options
44  */
45 #define CONFIG_NR_DRAM_BANKS            1               /* # of SDRAM banks */
46 #define PHYS_SDRAM_1                    0x10000000      /* Base address of bank 1 */
47 #ifdef CONFIG_SYS_SDRAM_BUS_WIDTH
48 #define PHYS_SDRAM_1_WIDTH              CONFIG_SYS_SDRAM_BUS_WIDTH
49 #else
50 #define PHYS_SDRAM_1_WIDTH              64
51 #endif
52 #define PHYS_SDRAM_1_SIZE               (SZ_512M * (PHYS_SDRAM_1_WIDTH / 32))
53
54 #ifdef CONFIG_MX6Q
55 #define CONFIG_SYS_SDRAM_CLK            528
56 #else
57 #define CONFIG_SYS_SDRAM_CLK            400
58 #endif
59 #define CONFIG_STACKSIZE                SZ_128K
60 #define CONFIG_SYS_MALLOC_LEN           SZ_8M
61 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1    /* Memtest start address */
62 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + SZ_4M)
63
64 /*
65  * U-Boot general configurations
66  */
67 #define CONFIG_SYS_LONGHELP
68 #ifdef CONFIG_MX6Q
69 #define CONFIG_SYS_PROMPT               "TX6Q U-Boot > "
70 #else
71 #define CONFIG_SYS_PROMPT               "TX6DL U-Boot > "
72 #endif
73 #define CONFIG_SYS_CBSIZE               2048    /* Console I/O buffer size */
74 #define CONFIG_SYS_PBSIZE                                               \
75         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
76                                                 /* Print buffer size */
77 #define CONFIG_SYS_MAXARGS              256     /* Max number of command args */
78 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
79                                                 /* Boot argument buffer size */
80 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
81 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
82 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
83
84 #define CONFIG_SYS_64BIT_VSPRINTF
85 #define CONFIG_SYS_NO_FLASH
86
87 /*
88  * Flattened Device Tree (FDT) support
89 */
90 #ifndef CONFIG_MFG
91 #define CONFIG_OF_LIBFDT
92 #ifdef CONFIG_OF_LIBFDT
93 #ifndef CONFIG_TX6_V2
94 #define CONFIG_FDT_FIXUP_PARTITIONS
95 #endif
96 #define CONFIG_OF_BOARD_SETUP
97 #define CONFIG_SYS_FDT_ADDR             (PHYS_SDRAM_1 + SZ_16M)
98 #endif /* CONFIG_OF_LIBFDT */
99 #endif /* CONFIG_MFG */
100
101 /*
102  * Boot Linux
103  */
104 #define xstr(s)                         str(s)
105 #define str(s)                          #s
106 #define __pfx(x, s)                     (x##s)
107 #define _pfx(x, s)                      __pfx(x, s)
108
109 #define CONFIG_CMDLINE_TAG
110 #define CONFIG_INITRD_TAG
111 #define CONFIG_SETUP_MEMORY_TAGS
112 #ifndef CONFIG_MFG
113 #define CONFIG_BOOTDELAY                1
114 #else
115 #define CONFIG_BOOTDELAY                0
116 #endif
117 #define CONFIG_ZERO_BOOTDELAY_CHECK
118 #define CONFIG_SYS_AUTOLOAD             "no"
119 #ifndef CONFIG_MFG
120 #define CONFIG_BOOTFILE                 "uImage"
121 #define CONFIG_BOOTARGS                 "init=/linuxrc console=ttymxc0,115200 ro debug panic=1"
122 #define CONFIG_BOOTCOMMAND              "run bootcmd_${boot_mode} bootm_cmd"
123 #else
124 #define CONFIG_BOOTCOMMAND              "env import " xstr(CONFIG_BOOTCMD_MFG_LOADADDR) ";run bootcmd_mfg"
125 #define CONFIG_BOOTCMD_MFG_LOADADDR     10500000
126 #define CONFIG_DELAY_ENVIRONMENT
127 #endif /* CONFIG_MFG */
128 #define CONFIG_LOADADDR                 18000000
129 #define CONFIG_SYS_LOAD_ADDR            _pfx(0x, CONFIG_LOADADDR)
130 #define CONFIG_IMX_WATCHDOG
131 #define CONFIG_WATCHDOG_TIMEOUT_MSECS   3000
132
133 /*
134  * Extra Environments
135  */
136 #ifndef CONFIG_MFG
137 #ifdef CONFIG_ENV_IS_NOWHERE
138 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
139         "autostart=no\0"                                                \
140         "autoload=no\0"                                                 \
141         "bootdelay=-1\0"                                                \
142         "fdtaddr=11000000\0"                                            \
143         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
144         "mtdparts=" MTDPARTS_DEFAULT "\0"
145 #else
146 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
147         "autostart=no\0"                                                \
148         "baseboard=stk5-v3\0"                                           \
149         "bootargs_jffs2=run default_bootargs;set bootargs ${bootargs}"  \
150         " root=/dev/mtdblock3 rootfstype=jffs2\0"                       \
151         "bootargs_mmc=run default_bootargs;set bootargs ${bootargs}"    \
152         " root=/dev/mmcblk0p2 rootwait\0"                               \
153         "bootargs_nfs=run default_bootargs;set bootargs ${bootargs}"    \
154         " root=/dev/nfs nfsroot=${nfs_server}:${nfsroot},nolock"        \
155         " ip=dhcp\0"                                                    \
156         "bootargs_ubifs=run default_bootargs;set bootargs ${bootargs}"  \
157         " ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs\0"           \
158         "bootcmd_jffs2=set autostart no;run bootargs_jffs2"             \
159         ";nboot linux\0"                                                \
160         "bootcmd_mmc=set autostart no;run bootargs_mmc"                 \
161         ";fatload mmc 0 ${loadaddr} uImage\0"                           \
162         CONFIG_SYS_BOOT_CMD_NAND                                        \
163         "bootcmd_net=set autoload y;set autostart n;run bootargs_nfs"   \
164         ";dhcp\0"                                                       \
165         "bootm_cmd=bootm ${loadaddr} - ${fdtaddr}\0"                    \
166         "boot_mode=" CONFIG_SYS_DEFAULT_BOOT_MODE "\0"                  \
167         "cpu_clk=800\0"                                                 \
168         "default_bootargs=set bootargs " CONFIG_BOOTARGS                \
169         " ${append_bootargs}\0"                                         \
170         "fdtaddr=11000000\0"                                            \
171         CONFIG_SYS_FDTSAVE_CMD                                          \
172         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
173         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
174         "nfsroot=/tftpboot/rootfs\0"                                    \
175         "otg_mode=device\0"                                             \
176         "touchpanel=tsc2007\0"                                          \
177         "video_mode=VGA\0"
178 #endif /*  CONFIG_ENV_IS_NOWHERE */
179 #endif /*  CONFIG_MFG */
180
181 #ifndef CONFIG_TX6_V2
182 #define CONFIG_SYS_DEFAULT_BOOT_MODE "nand"
183 #define CONFIG_SYS_BOOT_CMD_NAND                                        \
184         "bootcmd_nand=set autostart no;run bootargs_ubifs;nboot linux\0"
185 #define CONFIG_SYS_FDTSAVE_CMD                          \
186         "fdtsave=nand erase.part dtb"                   \
187         ";nand write ${fdtaddr} dtb ${fdtsize}\0"
188 #define MTD_NAME                        "gpmi-nand"
189 #define MTDIDS_DEFAULT                  "nand0=" MTD_NAME
190 #define CONFIG_SYS_NAND_ONFI_DETECTION
191 #else
192 #define CONFIG_SYS_DEFAULT_BOOT_MODE "mmc"
193 #define CONFIG_SYS_BOOT_CMD_NAND ""
194 #define CONFIG_SYS_FDTSAVE_CMD                                          \
195         "fdtsave=mmc open 0 1;mmc write ${fdtaddr} " xstr(CONFIG_SYS_DTB_BLKNO) " 80;mmc close 0 1\0"
196 #define MTD_NAME                        ""
197 #define MTDIDS_DEFAULT                  ""
198 #define CONFIG_SUPPORT_EMMC_BOOT
199 #define CONFIG_MMC_BOOT_DEV             0
200 #endif
201
202 /*
203  * U-Boot Commands
204  */
205 #include <config_cmd_default.h>
206 #define CONFIG_CMD_CACHE
207 #define CONFIG_CMD_MMC
208 #ifndef CONFIG_TX6_V2
209 #define CONFIG_CMD_NAND
210 #define CONFIG_CMD_MTDPARTS
211 #endif
212 #define CONFIG_CMD_BOOTCE
213 #define CONFIG_CMD_TIME
214 #define CONFIG_CMD_I2C
215 #define CONFIG_CMD_MEMTEST
216
217 /*
218  * Serial Driver
219  */
220 #define CONFIG_MXC_UART
221 #define CONFIG_MXC_UART_BASE            UART1_BASE
222 #define CONFIG_BAUDRATE                 115200          /* Default baud rate */
223 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, }
224 #define CONFIG_SYS_CONSOLE_INFO_QUIET
225
226 /*
227  * GPIO driver
228  */
229 #define CONFIG_MXC_GPIO
230
231 /*
232  * Ethernet Driver
233  */
234 #define CONFIG_FEC_MXC
235 #ifdef CONFIG_FEC_MXC
236 /* This is required for the FEC driver to work with cache enabled */
237 #define CONFIG_SYS_ARM_CACHE_WRITETHROUGH
238 #define CONFIG_SYS_CACHELINE_SIZE       64
239
240 #define IMX_FEC_BASE                    ENET_BASE_ADDR
241 #define CONFIG_FEC_MXC_PHYADDR          0
242 #define CONFIG_PHYLIB
243 #define CONFIG_PHY_SMSC
244 #define CONFIG_MII
245 #define CONFIG_FEC_XCV_TYPE             RMII
246 #define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM
247 #define CONFIG_CMD_MII
248 #define CONFIG_CMD_DHCP
249 #define CONFIG_CMD_PING
250 /* Add for working with "strict" DHCP server */
251 #define CONFIG_BOOTP_SUBNETMASK
252 #define CONFIG_BOOTP_GATEWAY
253 #define CONFIG_BOOTP_DNS
254 #endif
255
256 /*
257  * I2C Configs
258  */
259 #ifdef CONFIG_CMD_I2C
260 #define CONFIG_HARD_I2C
261 #define CONFIG_I2C_MXC
262 #define CONFIG_SYS_I2C_BASE             I2C1_BASE_ADDR
263 #define CONFIG_SYS_I2C_MX6_PORT1
264 #define CONFIG_SYS_I2C_SPEED            400000
265 #ifndef CONFIG_TX6_V2
266 #define CONFIG_SYS_I2C_SLAVE            0x3c
267 #else
268 #define CONFIG_SYS_I2C_SLAVE            0x32
269 #endif
270 #endif
271
272 #ifndef CONFIG_ENV_IS_NOWHERE
273 /* define one of the following options:
274 #define CONFIG_ENV_IS_IN_NAND
275 #define CONFIG_ENV_IS_IN_MMC
276 */
277 #define CONFIG_ENV_IS_IN_NAND
278 #endif
279 #define CONFIG_ENV_OVERWRITE
280
281 /*
282  * NAND flash driver
283  */
284 #ifdef CONFIG_CMD_NAND
285 #define CONFIG_MTD_DEVICE
286 #if 0
287 #define CONFIG_MTD_DEBUG
288 #define CONFIG_MTD_DEBUG_VERBOSE        4
289 #endif
290 #define CONFIG_NAND_MXS
291 #define CONFIG_NAND_MXS_NO_BBM_SWAP
292 #define CONFIG_APBH_DMA
293 #define CONFIG_APBH_DMA_BURST
294 #define CONFIG_APBH_DMA_BURST8
295 #define CONFIG_CMD_NAND_TRIMFFS
296 #define CONFIG_SYS_MXS_DMA_CHANNEL      4
297 #define CONFIG_SYS_MAX_FLASH_BANKS      1
298 #define CONFIG_SYS_NAND_MAX_CHIPS       1
299 #define CONFIG_SYS_MAX_NAND_DEVICE      1
300 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
301 #define CONFIG_SYS_NAND_USE_FLASH_BBT
302 #define CONFIG_SYS_NAND_BASE            0x00000000
303 #define CONFIG_CMD_ROMUPDATE
304
305 #define CONFIG_ENV_OFFSET               (CONFIG_U_BOOT_IMG_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS)
306 #define CONFIG_ENV_SIZE                 SZ_128K
307 #define CONFIG_ENV_RANGE                (3 * CONFIG_SYS_NAND_BLOCK_SIZE)
308 #else
309 #undef CONFIG_ENV_IS_IN_NAND
310 #endif /* CONFIG_CMD_NAND */
311
312 #ifdef CONFIG_ENV_OFFSET_REDUND
313 #define CONFIG_SYS_ENV_PART_STR         xstr(CONFIG_SYS_ENV_PART_SIZE)  \
314         "(env),"                                                        \
315         xstr(CONFIG_SYS_ENV_PART_SIZE)                                  \
316         "(env2),"
317 #define CONFIG_SYS_USERFS_PART_STR      xstr(CONFIG_SYS_USERFS_PART_SIZE) "(userfs)"
318 #else
319 #define CONFIG_SYS_ENV_PART_STR         xstr(CONFIG_SYS_ENV_PART_SIZE)  \
320         "(env),"
321 #define CONFIG_SYS_USERFS_PART_STR      xstr(CONFIG_SYS_USERFS_PART_SIZE2) "(userfs)"
322 #endif /* CONFIG_ENV_OFFSET_REDUND */
323
324 /*
325  * MMC Driver
326  */
327 #ifdef CONFIG_CMD_MMC
328 #define CONFIG_MMC
329 #define CONFIG_GENERIC_MMC
330 #define CONFIG_FSL_ESDHC
331 #define CONFIG_FSL_USDHC
332 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
333
334 #define CONFIG_DOS_PARTITION
335 #define CONFIG_CMD_FAT
336 #define CONFIG_FAT_WRITE
337 #define CONFIG_CMD_EXT2
338
339 /*
340  * Environments on MMC
341  */
342 #ifdef CONFIG_ENV_IS_IN_MMC
343 #define CONFIG_SYS_MMC_ENV_DEV          0
344 #define CONFIG_SYS_MMC_ENV_PART         1
345 #define CONFIG_DYNAMIC_MMC_DEVNO
346 #endif /* CONFIG_ENV_IS_IN_MMC */
347 #else
348 #undef CONFIG_ENV_IS_IN_MMC
349 #endif /* CONFIG_CMD_MMC */
350
351 #ifdef CONFIG_ENV_IS_NOWHERE
352 #undef CONFIG_ENV_SIZE
353 #define CONFIG_ENV_SIZE                 SZ_4K
354 #endif
355
356 #ifndef CONFIG_TX6_V2
357 #define MTDPARTS_DEFAULT                "mtdparts=" MTD_NAME ":"        \
358         xstr(CONFIG_SYS_U_BOOT_PART_SIZE)                               \
359         "@" xstr(CONFIG_SYS_NAND_U_BOOT_OFFS)                           \
360         "(u-boot),"                                                     \
361         CONFIG_SYS_ENV_PART_STR                                         \
362         "4m(linux),32m(rootfs)," CONFIG_SYS_USERFS_PART_STR ","         \
363         xstr(CONFIG_SYS_DTB_PART_SIZE)                                  \
364         "(dtb),"                                                        \
365         xstr(CONFIG_SYS_NAND_BBT_SIZE)                                  \
366         "@" xstr(CONFIG_SYS_NAND_BBT_OFFSET) "(bbt)ro"
367 #else
368 #define MTDPARTS_DEFAULT                ""
369 #endif
370
371 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
372 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \
373                                         GENERATED_GBL_DATA_SIZE)
374
375 #endif /* __CONFIG_H */