]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/lcd.h
atmel_lcd: Allow contrast polarity to be either positive or negative
[karo-tx-uboot.git] / include / lcd.h
1 /*
2  * MPC823 and PXA LCD Controller
3  *
4  * Modeled after video interface by Paolo Scaffardi
5  *
6  *
7  * (C) Copyright 2001
8  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9  *
10  * See file CREDITS for list of people who contributed to this
11  * project.
12  *
13  * This program is free software; you can redistribute it and/or
14  * modify it under the terms of the GNU General Public License as
15  * published by the Free Software Foundation; either version 2 of
16  * the License, or (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26  * MA 02111-1307 USA
27  */
28
29 #ifndef _LCD_H_
30 #define _LCD_H_
31
32 extern char lcd_is_enabled;
33
34 extern int lcd_line_length;
35 extern int lcd_color_fg;
36 extern int lcd_color_bg;
37
38 /*
39  * Frame buffer memory information
40  */
41 extern void *lcd_base;          /* Start of framebuffer memory  */
42 extern void *lcd_console_address;       /* Start of console buffer      */
43
44 extern short console_col;
45 extern short console_row;
46 extern struct vidinfo panel_info;
47
48 extern void lcd_ctrl_init (void *lcdbase);
49 extern void lcd_enable (void);
50
51 /* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
52 extern void lcd_setcolreg (ushort regno,
53                                 ushort red, ushort green, ushort blue);
54 extern void lcd_initcolregs (void);
55
56 /* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
57 extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp);
58
59 #if defined CONFIG_MPC823
60 /*
61  * LCD controller stucture for MPC823 CPU
62  */
63 typedef struct vidinfo {
64         ushort  vl_col;         /* Number of columns (i.e. 640) */
65         ushort  vl_row;         /* Number of rows (i.e. 480) */
66         ushort  vl_width;       /* Width of display area in millimeters */
67         ushort  vl_height;      /* Height of display area in millimeters */
68
69         /* LCD configuration register */
70         u_char  vl_clkp;        /* Clock polarity */
71         u_char  vl_oep;         /* Output Enable polarity */
72         u_char  vl_hsp;         /* Horizontal Sync polarity */
73         u_char  vl_vsp;         /* Vertical Sync polarity */
74         u_char  vl_dp;          /* Data polarity */
75         u_char  vl_bpix;        /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
76         u_char  vl_lbw;         /* LCD Bus width, 0 = 4, 1 = 8 */
77         u_char  vl_splt;        /* Split display, 0 = single-scan, 1 = dual-scan */
78         u_char  vl_clor;        /* Color, 0 = mono, 1 = color */
79         u_char  vl_tft;         /* 0 = passive, 1 = TFT */
80
81         /* Horizontal control register. Timing from data sheet */
82         ushort  vl_wbl;         /* Wait between lines */
83
84         /* Vertical control register */
85         u_char  vl_vpw;         /* Vertical sync pulse width */
86         u_char  vl_lcdac;       /* LCD AC timing */
87         u_char  vl_wbf;         /* Wait between frames */
88 } vidinfo_t;
89
90 #elif defined CONFIG_PXA250 || defined CONFIG_PXA27X || defined CONFIG_CPU_MONAHANS
91 /*
92  * PXA LCD DMA descriptor
93  */
94 struct pxafb_dma_descriptor {
95         u_long  fdadr;          /* Frame descriptor address register */
96         u_long  fsadr;          /* Frame source address register */
97         u_long  fidr;           /* Frame ID register */
98         u_long  ldcmd;          /* Command register */
99 };
100
101 /*
102  * PXA LCD info
103  */
104 struct pxafb_info {
105
106         /* Misc registers */
107         u_long  reg_lccr3;
108         u_long  reg_lccr2;
109         u_long  reg_lccr1;
110         u_long  reg_lccr0;
111         u_long  fdadr0;
112         u_long  fdadr1;
113
114         /* DMA descriptors */
115         struct  pxafb_dma_descriptor *  dmadesc_fblow;
116         struct  pxafb_dma_descriptor *  dmadesc_fbhigh;
117         struct  pxafb_dma_descriptor *  dmadesc_palette;
118
119         u_long  screen;         /* physical address of frame buffer */
120         u_long  palette;        /* physical address of palette memory */
121         u_int   palette_size;
122 };
123
124 /*
125  * LCD controller stucture for PXA CPU
126  */
127 typedef struct vidinfo {
128         ushort  vl_col;         /* Number of columns (i.e. 640) */
129         ushort  vl_row;         /* Number of rows (i.e. 480) */
130         ushort  vl_width;       /* Width of display area in millimeters */
131         ushort  vl_height;      /* Height of display area in millimeters */
132
133         /* LCD configuration register */
134         u_char  vl_clkp;        /* Clock polarity */
135         u_char  vl_oep;         /* Output Enable polarity */
136         u_char  vl_hsp;         /* Horizontal Sync polarity */
137         u_char  vl_vsp;         /* Vertical Sync polarity */
138         u_char  vl_dp;          /* Data polarity */
139         u_char  vl_bpix;        /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
140         u_char  vl_lbw;         /* LCD Bus width, 0 = 4, 1 = 8 */
141         u_char  vl_splt;        /* Split display, 0 = single-scan, 1 = dual-scan */
142         u_char  vl_clor;        /* Color, 0 = mono, 1 = color */
143         u_char  vl_tft;         /* 0 = passive, 1 = TFT */
144
145         /* Horizontal control register. Timing from data sheet */
146         ushort  vl_hpw;         /* Horz sync pulse width */
147         u_char  vl_blw;         /* Wait before of line */
148         u_char  vl_elw;         /* Wait end of line */
149
150         /* Vertical control register. */
151         u_char  vl_vpw;         /* Vertical sync pulse width */
152         u_char  vl_bfw;         /* Wait before of frame */
153         u_char  vl_efw;         /* Wait end of frame */
154
155         /* PXA LCD controller params */
156         struct  pxafb_info pxa;
157 } vidinfo_t;
158
159 #elif defined(CONFIG_ATMEL_LCD)
160
161 typedef struct vidinfo {
162         u_long vl_col;          /* Number of columns (i.e. 640) */
163         u_long vl_row;          /* Number of rows (i.e. 480) */
164         u_long vl_clk;  /* pixel clock in ps    */
165
166         /* LCD configuration register */
167         u_long vl_sync;         /* Horizontal / vertical sync */
168         u_long vl_bpix;         /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
169         u_long vl_tft;          /* 0 = passive, 1 = TFT */
170         u_long vl_cont_pol_low; /* contrast polarity is low */
171
172         /* Horizontal control register. */
173         u_long vl_hsync_len;    /* Length of horizontal sync */
174         u_long vl_left_margin;  /* Time from sync to picture */
175         u_long vl_right_margin; /* Time from picture to sync */
176
177         /* Vertical control register. */
178         u_long vl_vsync_len;    /* Length of vertical sync */
179         u_long vl_upper_margin; /* Time from sync to picture */
180         u_long vl_lower_margin; /* Time from picture to sync */
181
182         u_long  mmio;           /* Memory mapped registers */
183 } vidinfo_t;
184
185 #else
186
187 typedef struct vidinfo {
188         ushort  vl_col;         /* Number of columns (i.e. 160) */
189         ushort  vl_row;         /* Number of rows (i.e. 100) */
190
191         u_char  vl_bpix;        /* Bits per pixel, 0 = 1 */
192
193         ushort  *cmap;          /* Pointer to the colormap */
194
195         void    *priv;          /* Pointer to driver-specific data */
196 } vidinfo_t;
197
198 #endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
199
200 extern vidinfo_t panel_info;
201
202 /* Video functions */
203
204 #if defined(CONFIG_RBC823)
205 void    lcd_disable     (void);
206 #endif
207
208
209 /* int  lcd_init        (void *lcdbase); */
210 void    lcd_putc        (const char c);
211 void    lcd_puts        (const char *s);
212 void    lcd_printf      (const char *fmt, ...);
213
214 /* Allow boards to customize the information displayed */
215 void lcd_show_board_info(void);
216
217 /************************************************************************/
218 /* ** BITMAP DISPLAY SUPPORT                                            */
219 /************************************************************************/
220 #if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
221 # include <bmp_layout.h>
222 # include <asm/byteorder.h>
223 #endif
224
225 /*
226  *  Information about displays we are using. This is for configuring
227  *  the LCD controller and memory allocation. Someone has to know what
228  *  is connected, as we can't autodetect anything.
229  */
230 #define CONFIG_SYS_HIGH 0       /* Pins are active high                 */
231 #define CONFIG_SYS_LOW          1       /* Pins are active low                  */
232
233 #define LCD_MONOCHROME  0
234 #define LCD_COLOR2      1
235 #define LCD_COLOR4      2
236 #define LCD_COLOR8      3
237 #define LCD_COLOR16     4
238
239 /*----------------------------------------------------------------------*/
240 #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
241 # define LCD_INFO_X             0
242 # define LCD_INFO_Y             (BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
243 #elif defined(CONFIG_LCD_LOGO)
244 # define LCD_INFO_X             (BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
245 # define LCD_INFO_Y             (VIDEO_FONT_HEIGHT)
246 #else
247 # define LCD_INFO_X             (VIDEO_FONT_WIDTH)
248 # define LCD_INFO_Y             (VIDEO_FONT_HEIGHT)
249 #endif
250
251 /* Default to 8bpp if bit depth not specified */
252 #ifndef LCD_BPP
253 # define LCD_BPP                        LCD_COLOR8
254 #endif
255 #ifndef LCD_DF
256 # define LCD_DF                 1
257 #endif
258
259 /* Calculate nr. of bits per pixel  and nr. of colors */
260 #define NBITS(bit_code)         (1 << (bit_code))
261 #define NCOLORS(bit_code)       (1 << NBITS(bit_code))
262
263 /************************************************************************/
264 /* ** CONSOLE CONSTANTS                                                 */
265 /************************************************************************/
266 #if LCD_BPP == LCD_MONOCHROME
267
268 /*
269  * Simple black/white definitions
270  */
271 # define CONSOLE_COLOR_BLACK    0
272 # define CONSOLE_COLOR_WHITE    1       /* Must remain last / highest   */
273
274 #elif LCD_BPP == LCD_COLOR8
275
276 /*
277  * 8bpp color definitions
278  */
279 # define CONSOLE_COLOR_BLACK    0
280 # define CONSOLE_COLOR_RED      1
281 # define CONSOLE_COLOR_GREEN    2
282 # define CONSOLE_COLOR_YELLOW   3
283 # define CONSOLE_COLOR_BLUE     4
284 # define CONSOLE_COLOR_MAGENTA  5
285 # define CONSOLE_COLOR_CYAN     6
286 # define CONSOLE_COLOR_GREY     14
287 # define CONSOLE_COLOR_WHITE    15      /* Must remain last / highest   */
288
289 #else
290
291 /*
292  * 16bpp color definitions
293  */
294 # define CONSOLE_COLOR_BLACK    0x0000
295 # define CONSOLE_COLOR_WHITE    0xffff  /* Must remain last / highest   */
296
297 #endif /* color definitions */
298
299 /************************************************************************/
300 #ifndef PAGE_SIZE
301 # define PAGE_SIZE      4096
302 #endif
303
304 /************************************************************************/
305 /* ** CONSOLE DEFINITIONS & FUNCTIONS                                   */
306 /************************************************************************/
307 #if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
308 # define CONSOLE_ROWS           ((panel_info.vl_row-BMP_LOGO_HEIGHT) \
309                                         / VIDEO_FONT_HEIGHT)
310 #else
311 # define CONSOLE_ROWS           (panel_info.vl_row / VIDEO_FONT_HEIGHT)
312 #endif
313
314 #define CONSOLE_COLS            (panel_info.vl_col / VIDEO_FONT_WIDTH)
315 #define CONSOLE_ROW_SIZE        (VIDEO_FONT_HEIGHT * lcd_line_length)
316 #define CONSOLE_ROW_FIRST       (lcd_console_address)
317 #define CONSOLE_ROW_SECOND      (lcd_console_address + CONSOLE_ROW_SIZE)
318 #define CONSOLE_ROW_LAST        (lcd_console_address + CONSOLE_SIZE \
319                                         - CONSOLE_ROW_SIZE)
320 #define CONSOLE_SIZE            (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
321 #define CONSOLE_SCROLL_SIZE     (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
322
323 #if LCD_BPP == LCD_MONOCHROME
324 # define COLOR_MASK(c)          ((c)      | (c) << 1 | (c) << 2 | (c) << 3 | \
325                                  (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
326 #elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
327 # define COLOR_MASK(c)          (c)
328 #else
329 # error Unsupported LCD BPP.
330 #endif
331
332 /************************************************************************/
333
334 #endif  /* _LCD_H_ */