]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/mmc.h
mmc: checking status after commands with R1b response
[karo-tx-uboot.git] / include / mmc.h
1 /*
2  * Copyright 2008,2010 Freescale Semiconductor, Inc
3  * Andy Fleming
4  *
5  * Based (loosely) on the Linux code
6  *
7  * See file CREDITS for list of people who contributed to this
8  * project.
9  *
10  * This program is free software; you can redistribute it and/or
11  * modify it under the terms of the GNU General Public License as
12  * published by the Free Software Foundation; either version 2 of
13  * the License, or (at your option) any later version.
14  *
15  * This program is distributed in the hope that it will be useful,
16  * but WITHOUT ANY WARRANTY; without even the implied warranty of
17  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18  * GNU General Public License for more details.
19  *
20  * You should have received a copy of the GNU General Public License
21  * along with this program; if not, write to the Free Software
22  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23  * MA 02111-1307 USA
24  */
25
26 #ifndef _MMC_H_
27 #define _MMC_H_
28
29 #include <linux/list.h>
30
31 #define SD_VERSION_SD   0x20000
32 #define SD_VERSION_2    (SD_VERSION_SD | 0x20)
33 #define SD_VERSION_1_0  (SD_VERSION_SD | 0x10)
34 #define SD_VERSION_1_10 (SD_VERSION_SD | 0x1a)
35 #define MMC_VERSION_MMC         0x10000
36 #define MMC_VERSION_UNKNOWN     (MMC_VERSION_MMC)
37 #define MMC_VERSION_1_2         (MMC_VERSION_MMC | 0x12)
38 #define MMC_VERSION_1_4         (MMC_VERSION_MMC | 0x14)
39 #define MMC_VERSION_2_2         (MMC_VERSION_MMC | 0x22)
40 #define MMC_VERSION_3           (MMC_VERSION_MMC | 0x30)
41 #define MMC_VERSION_4           (MMC_VERSION_MMC | 0x40)
42
43 #define MMC_MODE_HS             0x001
44 #define MMC_MODE_HS_52MHz       0x010
45 #define MMC_MODE_4BIT           0x100
46 #define MMC_MODE_8BIT           0x200
47 #define MMC_MODE_SPI            0x400
48
49 #define SD_DATA_4BIT    0x00040000
50
51 #define IS_SD(x) (x->version & SD_VERSION_SD)
52
53 #define MMC_DATA_READ           1
54 #define MMC_DATA_WRITE          2
55
56 #define NO_CARD_ERR             -16 /* No SD/MMC card inserted */
57 #define UNUSABLE_ERR            -17 /* Unusable Card */
58 #define COMM_ERR                -18 /* Communications Error */
59 #define TIMEOUT                 -19
60
61 #define MMC_CMD_GO_IDLE_STATE           0
62 #define MMC_CMD_SEND_OP_COND            1
63 #define MMC_CMD_ALL_SEND_CID            2
64 #define MMC_CMD_SET_RELATIVE_ADDR       3
65 #define MMC_CMD_SET_DSR                 4
66 #define MMC_CMD_SWITCH                  6
67 #define MMC_CMD_SELECT_CARD             7
68 #define MMC_CMD_SEND_EXT_CSD            8
69 #define MMC_CMD_SEND_CSD                9
70 #define MMC_CMD_SEND_CID                10
71 #define MMC_CMD_STOP_TRANSMISSION       12
72 #define MMC_CMD_SEND_STATUS             13
73 #define MMC_CMD_SET_BLOCKLEN            16
74 #define MMC_CMD_READ_SINGLE_BLOCK       17
75 #define MMC_CMD_READ_MULTIPLE_BLOCK     18
76 #define MMC_CMD_WRITE_SINGLE_BLOCK      24
77 #define MMC_CMD_WRITE_MULTIPLE_BLOCK    25
78 #define MMC_CMD_APP_CMD                 55
79 #define MMC_CMD_SPI_READ_OCR            58
80 #define MMC_CMD_SPI_CRC_ON_OFF          59
81
82 #define SD_CMD_SEND_RELATIVE_ADDR       3
83 #define SD_CMD_SWITCH_FUNC              6
84 #define SD_CMD_SEND_IF_COND             8
85
86 #define SD_CMD_APP_SET_BUS_WIDTH        6
87 #define SD_CMD_APP_SEND_OP_COND         41
88 #define SD_CMD_APP_SEND_SCR             51
89
90 /* SCR definitions in different words */
91 #define SD_HIGHSPEED_BUSY       0x00020000
92 #define SD_HIGHSPEED_SUPPORTED  0x00020000
93
94 #define MMC_HS_TIMING           0x00000100
95 #define MMC_HS_52MHZ            0x2
96
97 #define OCR_BUSY        0x80000000
98 #define OCR_HCS         0x40000000
99
100 #define MMC_STATUS_MASK         (~0x0206BF7F)
101 #define MMC_STATUS_RDY_FOR_DATA (1<<8)
102 #define MMC_STATUS_CURR_STATE   (0xf<<9)
103
104 #define MMC_VDD_165_195         0x00000080      /* VDD voltage 1.65 - 1.95 */
105 #define MMC_VDD_20_21           0x00000100      /* VDD voltage 2.0 ~ 2.1 */
106 #define MMC_VDD_21_22           0x00000200      /* VDD voltage 2.1 ~ 2.2 */
107 #define MMC_VDD_22_23           0x00000400      /* VDD voltage 2.2 ~ 2.3 */
108 #define MMC_VDD_23_24           0x00000800      /* VDD voltage 2.3 ~ 2.4 */
109 #define MMC_VDD_24_25           0x00001000      /* VDD voltage 2.4 ~ 2.5 */
110 #define MMC_VDD_25_26           0x00002000      /* VDD voltage 2.5 ~ 2.6 */
111 #define MMC_VDD_26_27           0x00004000      /* VDD voltage 2.6 ~ 2.7 */
112 #define MMC_VDD_27_28           0x00008000      /* VDD voltage 2.7 ~ 2.8 */
113 #define MMC_VDD_28_29           0x00010000      /* VDD voltage 2.8 ~ 2.9 */
114 #define MMC_VDD_29_30           0x00020000      /* VDD voltage 2.9 ~ 3.0 */
115 #define MMC_VDD_30_31           0x00040000      /* VDD voltage 3.0 ~ 3.1 */
116 #define MMC_VDD_31_32           0x00080000      /* VDD voltage 3.1 ~ 3.2 */
117 #define MMC_VDD_32_33           0x00100000      /* VDD voltage 3.2 ~ 3.3 */
118 #define MMC_VDD_33_34           0x00200000      /* VDD voltage 3.3 ~ 3.4 */
119 #define MMC_VDD_34_35           0x00400000      /* VDD voltage 3.4 ~ 3.5 */
120 #define MMC_VDD_35_36           0x00800000      /* VDD voltage 3.5 ~ 3.6 */
121
122 #define MMC_SWITCH_MODE_CMD_SET         0x00 /* Change the command set */
123 #define MMC_SWITCH_MODE_SET_BITS        0x01 /* Set bits in EXT_CSD byte
124                                                 addressed by index which are
125                                                 1 in value field */
126 #define MMC_SWITCH_MODE_CLEAR_BITS      0x02 /* Clear bits in EXT_CSD byte
127                                                 addressed by index, which are
128                                                 1 in value field */
129 #define MMC_SWITCH_MODE_WRITE_BYTE      0x03 /* Set target byte to value */
130
131 #define SD_SWITCH_CHECK         0
132 #define SD_SWITCH_SWITCH        1
133
134 /*
135  * EXT_CSD fields
136  */
137
138 #define EXT_CSD_BUS_WIDTH       183     /* R/W */
139 #define EXT_CSD_HS_TIMING       185     /* R/W */
140 #define EXT_CSD_CARD_TYPE       196     /* RO */
141 #define EXT_CSD_REV             192     /* RO */
142 #define EXT_CSD_SEC_CNT         212     /* RO, 4 bytes */
143
144 /*
145  * EXT_CSD field definitions
146  */
147
148 #define EXT_CSD_CMD_SET_NORMAL          (1<<0)
149 #define EXT_CSD_CMD_SET_SECURE          (1<<1)
150 #define EXT_CSD_CMD_SET_CPSECURE        (1<<2)
151
152 #define EXT_CSD_CARD_TYPE_26    (1<<0)  /* Card can run at 26MHz */
153 #define EXT_CSD_CARD_TYPE_52    (1<<1)  /* Card can run at 52MHz */
154
155 #define EXT_CSD_BUS_WIDTH_1     0       /* Card is in 1 bit mode */
156 #define EXT_CSD_BUS_WIDTH_4     1       /* Card is in 4 bit mode */
157 #define EXT_CSD_BUS_WIDTH_8     2       /* Card is in 8 bit mode */
158
159 #define R1_ILLEGAL_COMMAND              (1 << 22)
160 #define R1_APP_CMD                      (1 << 5)
161
162 #define MMC_RSP_PRESENT (1 << 0)
163 #define MMC_RSP_136     (1 << 1)                /* 136 bit response */
164 #define MMC_RSP_CRC     (1 << 2)                /* expect valid crc */
165 #define MMC_RSP_BUSY    (1 << 3)                /* card may send busy */
166 #define MMC_RSP_OPCODE  (1 << 4)                /* response contains opcode */
167
168 #define MMC_RSP_NONE    (0)
169 #define MMC_RSP_R1      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
170 #define MMC_RSP_R1b     (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE| \
171                         MMC_RSP_BUSY)
172 #define MMC_RSP_R2      (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
173 #define MMC_RSP_R3      (MMC_RSP_PRESENT)
174 #define MMC_RSP_R4      (MMC_RSP_PRESENT)
175 #define MMC_RSP_R5      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
176 #define MMC_RSP_R6      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
177 #define MMC_RSP_R7      (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
178
179
180 struct mmc_cid {
181         unsigned long psn;
182         unsigned short oid;
183         unsigned char mid;
184         unsigned char prv;
185         unsigned char mdt;
186         char pnm[7];
187 };
188
189 /*
190  * WARNING!
191  *
192  * This structure is used by atmel_mci.c only.
193  * It works for the AVR32 architecture but NOT
194  * for ARM/AT91 architectures.
195  * Its use is highly depreciated.
196  * After the atmel_mci.c driver for AVR32 has
197  * been replaced this structure will be removed.
198  */
199 struct mmc_csd
200 {
201         u8      csd_structure:2,
202                 spec_vers:4,
203                 rsvd1:2;
204         u8      taac;
205         u8      nsac;
206         u8      tran_speed;
207         u16     ccc:12,
208                 read_bl_len:4;
209         u64     read_bl_partial:1,
210                 write_blk_misalign:1,
211                 read_blk_misalign:1,
212                 dsr_imp:1,
213                 rsvd2:2,
214                 c_size:12,
215                 vdd_r_curr_min:3,
216                 vdd_r_curr_max:3,
217                 vdd_w_curr_min:3,
218                 vdd_w_curr_max:3,
219                 c_size_mult:3,
220                 sector_size:5,
221                 erase_grp_size:5,
222                 wp_grp_size:5,
223                 wp_grp_enable:1,
224                 default_ecc:2,
225                 r2w_factor:3,
226                 write_bl_len:4,
227                 write_bl_partial:1,
228                 rsvd3:5;
229         u8      file_format_grp:1,
230                 copy:1,
231                 perm_write_protect:1,
232                 tmp_write_protect:1,
233                 file_format:2,
234                 ecc:2;
235         u8      crc:7;
236         u8      one:1;
237 };
238
239 struct mmc_cmd {
240         ushort cmdidx;
241         uint resp_type;
242         uint cmdarg;
243         uint response[4];
244         uint flags;
245 };
246
247 struct mmc_data {
248         union {
249                 char *dest;
250                 const char *src; /* src buffers don't get written to */
251         };
252         uint flags;
253         uint blocks;
254         uint blocksize;
255 };
256
257 struct mmc {
258         struct list_head link;
259         char name[32];
260         void *priv;
261         uint voltages;
262         uint version;
263         uint f_min;
264         uint f_max;
265         int high_capacity;
266         uint bus_width;
267         uint clock;
268         uint card_caps;
269         uint host_caps;
270         uint ocr;
271         uint scr[2];
272         uint csd[4];
273         uint cid[4];
274         ushort rca;
275         uint tran_speed;
276         uint read_bl_len;
277         uint write_bl_len;
278         u64 capacity;
279         block_dev_desc_t block_dev;
280         int (*send_cmd)(struct mmc *mmc,
281                         struct mmc_cmd *cmd, struct mmc_data *data);
282         void (*set_ios)(struct mmc *mmc);
283         int (*init)(struct mmc *mmc);
284 #ifdef CONFIG_MMC_MBLOCK
285         uint b_max;
286 #endif
287 };
288
289 int mmc_register(struct mmc *mmc);
290 int mmc_initialize(bd_t *bis);
291 int mmc_init(struct mmc *mmc);
292 int mmc_read(struct mmc *mmc, u64 src, uchar *dst, int size);
293 void mmc_set_clock(struct mmc *mmc, uint clock);
294 struct mmc *find_mmc_device(int dev_num);
295 int mmc_set_dev(int dev_num);
296 void print_mmc_devices(char separator);
297 int board_mmc_getcd(u8 *cd, struct mmc *mmc);
298
299 #ifdef CONFIG_GENERIC_MMC
300 int atmel_mci_init(void *regs);
301 #define mmc_host_is_spi(mmc)    ((mmc)->host_caps & MMC_MODE_SPI)
302 struct mmc *mmc_spi_init(uint bus, uint cs, uint speed, uint mode);
303 #else
304 int mmc_legacy_init(int verbose);
305 #endif
306
307 #endif /* _MMC_H_ */