======================================================================
-Changes since U-Boot 0.3.0:
+Changes since U-Boot 0.3.1:
======================================================================
+* Add zero-copy ramdisk support (requires corresponding kernel support!)
+
+* Patch by Kyle Harris, 20 May 2003:
+ In preparation for an ixp port, rename cpu/xscale and arch-xscale
+ into cpu/pxa and arch-pxa.
+
+* Patch by Stefan Roese, 23 May 2003:
+ - IBM PPC405EP port added.
+ - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not
+ UART0) is used as default U-Boot console. PPC4xx only!
+ - esd ASH405 board added (PPC405EP based).
+ - BUBINGA405EP board added (PPC405EP based - IBM Eval Board).
+ - esd CPCI405AB board added.
+ - esd PMC405 board added.
+ - Update of some esd boards.
+
+* Patch by Denis Peter, 19 Mai 2003:
+ add support for the MIP405-3 board
+
+* Patch by Dave Ellis, 22 May 2003:
+ Fix problem with only partially cleared .bss segment
+
+* Patch by Rune Torgersen, 12 May 2003:
+ get PCI to work on a MPC8266ADS board; incorporate change to
+ cpu/mpc8260/pci.c to enable overrides of PCI memory parameters
+
+* Patch by Nye Liu, 1 May 2003:
+ minor patches for the FADS8xx
+
+* Patch by Thomas Schäfer, 28 Apr 2003:
+ Fix SPD handling for 256 ECC DIMM on Walnut
+
+* Add support for arbitrary bitmaps for TRAB's VFD command;
+ allow to pass boot bitmap addresses in environment variables;
+ allow for zero boot delay
+
+* Patch by Christian Geißinger, 19 May 2002:
+ On TRAB: wait until the dummy byte has been completely sent
+
+* Patch by David Updegraff, 22 Apr 2003:
+ update for CrayL1 board
+
+* Patch by Pantelis Antoniou, 21 Apr 2003:
+ add boot support for ARTOS (a proprietary OS)
+
+* Patch by Steven Scholz, 11 Apr 2003:
+ Add support for RTC DS1338
+
+* Patch by Rod Boyce, 24 Jan 2003:
+ Fix counting of extended partitions in diskboot command
+
+* Patch by Christophe Lindheimer, 20 May 2003:
+ allow the use of CFG_LOADS when CFG_NO_FLASH is set
+
+* Fix SDRAM timing on Purple board
+
+* Add support for CompactFlash on ATC board
+ (includes support for Intel 82365 and compatible PC Card controllers,
+ and Yenta-compatible PCI-to-CardBus controllers)
+
+* Patch by Mathijs Haarman, 08 May 2003:
+ Add lan91c96 driver (tested on Lubbock and custom PXA250 board only)
+
+* Fix problem with usage of "true" (undefined in current versions of bfd.h)
+
+* Add support for Promess ATC board
+
+* Patch by Keith Outwater, 28 Apr 2003:
+ - Miscellaneous corrections and additions to GEN860T board specific code.
+ - Added GEN860_SC variant to GEN860T.
+ - Miscellaneous corrections to GEN860T documentation.
+ - Correct duplicate entry in U-Boot CREDITS file.
+ - Add GEN860T_SC entry in MAINTAINERS file.
+ - Update CREDITS file with GEN860T_SC info.
+
+* Update Smiths Aerospace addresses in MAINTAINERS file
+
+* Fix error handling in hush's version of "run" command
+
+* LWMON extensions:
+ - Splashscreen support
+ - modem support
+ - sysmon support
+ - temperature dependend enabling of LCD
+
+* Allow booting from old "PPCBoot" disk partitions
+
+* Add support for TQM8255 Board / MPC8255 CPU
+
+======================================================================
+Changes for U-Boot 0.3.1:
+======================================================================
+
+* Make sure Block Lock Bits get cleared in R360MPI flash driver
+
+* MPC823 LCD driver: Fill color map backwards, to allow for steady
+ display when Linux takes over
+
+* Patch by Erwin Rol, 27 Feb 2003:
+ Add support for RTEMS (this time for real).
+
+* Add support for "bmp info" and "bmp display" commands to load
+ bitmap images; this can be used (for example in a "preboot"
+ command) to display a splash screen very quickly after poweron.
+
+* Add support for 133 MHz clock on INCA-IP board
+
+* Patch by Lutz Dennig, 10 Apr 2003:
+ Update for R360MPI board
+
+* Add new meaning to "autostart" environment variable:
+ If set to "no", a standalone image passed to the
+ "bootm" command will be copied to the load address
+ (and eventually uncompressed), but NOT be started.
+ This can be used to load and uncompress arbitrary
+ data.
+
* Patch by Stefan Roese, 10 Apr 2003:
- Changed DHCP client to use ip address from server option field #54
- from the OFFER-paket in the server option field #54 in the REQUEST-
- paket. This fixes a problem using a Windows 2000 DHCP server, where
- the DHCP-server is not the TFTP-server.
+ Changed DHCP client to use IP address from server option field #54
+ from the OFFER packet in the server option field #54 in the REQUEST
+ packet. This fixes a problem using a Windows 2000 DHCP server,
+ where the DHCP-server is not the TFTP-server.
+
+* Set max brightness for MN11236 displays on TRAB board
* Add support for TQM862L modules
projects / karo-tx-uboot.git / blobdiff