Changes for U-Boot 1.1.3:
======================================================================
+* Patch by Stefan Roese, 1 Jul 2005:
+ Fix PHY address for CATcenter board (now correct!)
+
+* Patch by Stefan Roese, 30 Jun 2005:
+ Fix PHY addresses for PPChameleon and CATcenter boards
+ Change MAINTAINER for most esd boards
+
+* Patch by Detlev Zundel, 30 Jun 2005:
+ Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code
+
+* Fix baudrate calculation problem on MPC5200 systems
+
+* Add EEPROM and RTC support for HMI1001 board
+
+* Patch by Detlev Zundel, 20 Jun 2005:
+ Fix initialization of low active GPIO pins on inka4x0 board
+
+* Enable redundant environment, disable HW flash protection of
+ HMI1001 board
+
+* Patch by Travis Sawyer, 10 Jun 2005:
+ Initialize allocated dev and private hw structures
+ after their respective allocation in 440gx_enet.c
+
+* Patch by Steven Scholz, 10 Jun 2005:
+ Fix byteorder problems with second argument of "bootm" with
+ standalone images;
+
+* Add support for HMI1001 board
+
+* Disable "date" and "sntp" commands on TQM866M
+
+* Fix watchdog reset problems on LWMON board
+
+* Patch by Juergen Selent, 17 May 2005:
+ Add support for Funkwerk VoVPN gateway module.
+
+* Cleanup debug code for MPC8220 FEC driver
+
+* Extend burst mode RAM test program to take a loop count
+ (0 = infinite)
+
+* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
+ those boards that use it.
+
+* Patches by Greg Ungerer, 19 May 2005:
+ - add support for the KS8695P (ARM 922 based) CPU
+ - add support for the OpenGear CM4008, CM4116 and CM4148 boards
+
+* Patch by Steven Scholz, 19 May 2005:
+ Add support for CONFIG_SERIAL_TAG on ARM boards
+
+* Add PCI support for Sorcery board.
+ Code cleanup (especially Sorcery / Alaska / Yukon serial driver).
+
+* Fix compile problems caused by new burst mode SDRAM test;
+ make port pins to trigger logic analyzer configurable
+
+* Fix timer handling on MPC85xx systems
+
+* Fix debug code in omap5912osk flash driver
+
+* Add support for MPC8247 based "IDS8247" board.
+
+* Add support for 2 x TSEC interfaces on the TQM8540 board.
+
+* On LWMON we must use the watchdog to reset the board as the CPU
+ genereated HRESET pulse is too short to reset the external
+ circuitry.
+
+* Add test tool to exercise SDRAM accesses in burst mode
+ (as standalone program, MPC8xx/PowerPC only)
+
+* Increase CFG_MONITOR_LEN for Rattler board to match actual code
+ size.
+
+* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
+ March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI
+ added to support LZO and LZARI compression modes (undefined by
+ default).
+
+* Fix problem with symbolic links in JFFS2 code.
+
+* Use linker ASSERT statement to prevent undetected overlapping of
+ sections on PPChameleon board; other boards might use this, too.
+
+* Patch by Stefan Roese, 03 May 2005:
+ Update for P3G4
+ Fix problems in cmd_universe.c
+
+* Patch by Matthias Fuchs, 03 May 2005:
+ Added missing variable declaration in cmd_nand.c
+ Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram
+
+* Fix INKA4x0: use CS1 as gpio_wkup_6 output
+
+* Fix bug in the SDRAM initialization code for canmb, IceCube and
+ PM520 boards.
+ Fix PHY address for canmb board.
+
+* Cleanup serial console baudrate calculation on AT91RM9200;
+ get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
+
+* Patch by Matthias Fuchs, 18 Apr 2005:
+ Make PCI target address spaces on PMC405 and CPCI405 boards
+ configurable via environment variables
+
+* Auto-size RAM on canmb board.
+
+* Add support for canmb board
+
+* Patch by Stefan Roese, 13 Apr 2005:
+ Update for esd apc405
+
+* Fixes for TQM8560 board:
+ - fix clock rates
+ - remove debug messages
+ - fix flash sector protection
+
+* Patch by Steven Scholz, 07 Apr 2005:
+ Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C
+
+* Patches by Steven Scholz, 07 Apr 2005:
+ Fix compiler warning in altera.c
+ Fix warning in cpu/arm920t/at91rm9200/i2c.c
+
+* Patch by Ladislav Michl, 06 Apr 2005:
+ Fix voiceblue configuration.
+
+* Patch by Stefan Roese, 06 Apr 2005:
+ Updates for OCOTEA board:
+ - Changed U-Boot size from 512kByte to 256kByte
+ - Fixed flash driver to support boot from soldered user flash
+ - Added README for switch from PIBS firmware to U-Boot
+
+* Patch by Travis Sawyer, 05 Apr 2005:
+ - Change timer frequency for ppc 440 from 10 ms to 1 ms.
+ Problem found by Andrew Wozniak.
+
+* Patch by Steven Scholz, 06 Apr 2005:
+ - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
+ - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200
+
+* Patches by Robert Whaley, 29 Nov 2004:
+ - update the pxa-regs.h file for PXA27x chips
+ - add PXA27x based ADSVIX board
+ - add support for MMC on PXA27x processors
+
+* Patch by Andrew E. Mileski, 28 Nov 2004:
+ Fix PPC4xx SPD SDRAM detection bug
+
+* Patch by Hiroshi Ito, 26 Nov 2004:
+ Fix logic of "test -z" and "test -n" commands
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Add support for VoiceBlue board.
+
+* Patch by Ladislav Michl, 05 Apr 2005:
+ Fix netboot_common() prototypes.
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Use i.MX watchdog timer for reset_cpu()
+
+* Patch by Steven Scholz, 05 Apr 2005:
+ Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
+ subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
+ (now in interupts.c)
+
+* Add support for MPC8220 based "sorcery" board.
+
+* Add support for TQM8560 board.
+
+* Add FEC support for TQM8540 board.
+ Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC
+
+* Patch by Martin Krause, 04 Apr 2005:
+ Update default configuration for CMC_PU2 board.
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ - remove all references to CONFIG_INIT_CRITICAL for ARM based boards
+ - introduce two new configuration options instead:
+ CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT
+
+* Patch by Steven Scholz, 04 Apr 2005:
+ Make sure that MDIO clock does not exceed 2.5 MHz on AT91
+
+* Fix timer code for ARM systems: make sure that udelay() does not
+ reset timers so it's save to use udelay() in timeout code.
+
* Patch by Mathias Küster, 23 Nov 2004:
add udelay support for the mcf5282 cpu
* Patch by Tolunay Orkun, 16 November 2004:
fix incorrect onboard Xilinx CPLD base address
-
+
* Patch by Jerry Van Baren, 08 Nov 2004:
- Add low-boot option for MPC8260ADS board (if lowboot is selected,
the jumper for the HRCW source should select flash. If lowboot is
projects / karo-tx-uboot.git / blobdiff