======================================================================
-Changes since U-Boot 0.4.0:
+Changes for U-Boot 1.0.0:
======================================================================
+* disable MPC5200 bus pipelining as workaround for bus contention
+
+* Modify XLB arbiter priorities on MPC5200 so all devices use same
+ priority; configure critical interrupts to be handled like external
+ interrupts
+
+* Make IPB clock on MGT5100/MPC5200 configurable in board config file;
+ go back to 66 MHz for stability
+
+* Patches by Jon Diekema, 15 Sep 2003:
+ - add description for missing CFG_CMD_* entries in the README file
+ - sacsng tweaks
+
+* Patch by Gleb Natapov, 14 Sep 2003:
+ enable watchdog support for all MPC824x boards that have a watchdog
+
+* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the
+ "Non-octet Aligned Frame" errors we see at 100 Mbps
+
+* Patch by Sharad Gupta, 14 Sep 2003:
+ fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL])
+
+* Patch by llandre, 11 Sep 2003:
+ update configuration for PPChameleonEVB board
+
+* Patch by David Müller, 13 Sep 2003:
+ various changes to VCMA9 board specific files
+
+* Add I2C support for MGT5100 / MPC5200
+
+* Patch by Rune Torgersen, 11 Sep 2003:
+ Changed default memory option on MPC8266ADS to NOT be Page Based
+ Interleave, since this doesn't work very well with the standard
+ 16MB DIMM
+
+* Patch by George G. Davis, 12 Sep 2003:
+ fix Makefile settings for sk98 driver
+
+* Patch by Stefan Roese, 12 Sep 2003:
+ - new boards added: DP405, HUB405, PLU405, VOH405
+ - some esd boards updated
+ - cpu/ppc4xx/sdram.c: disable memory controller before setting
+ first values
+ - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems
+
+* Patch by Martin Krause, 11 Sep 2003:
+ add burn-in tests for TRAB board
+
+* Enable instruction cache on MPC5200 board
+
+* Patch by Denis Peter, 11 Sep 2003:
+ - fix USB data pointer assignment for bulk only transfer.
+ - prevent to display erased directories in FAT filesystem.
+
+* Change output format for NAND flash - make it look like for other
+ memory, too
+
+======================================================================
+Changes for U-Boot 0.4.8:
+======================================================================
+
+* Patches by Denis Peter, 9 Sep 2003:
+ add FAT support for IDE, SCSI and USB
+
+* Patches by Gleb Natapov, 2 Sep 2003:
+ - cleanup of POST code for unsupported architectures
+ - MPC824x locks way0 of data cache for use as initial RAM;
+ this patch unlocks it after relocation to RAM and invalidates
+ the locked entries.
+
+* Patch by Gleb Natapov, 30 Aug 2003:
+ new I2C driver for mpc107 bridge. Now works from flash.
+
+* Patch by Dave Ellis, 11 Aug 2003:
+ - JFFS2: fix typo in common/cmd_jffs2.c
+ - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option
+ - JFFS2: remove node version 0 warning
+ - JFFS2: accept JFFS2 PADDING nodes
+ - SXNI855T: add AM29LV800 support
+ - SXNI855T: move environment from EEPROM to flash
+ - SXNI855T: boot from JFFS2 in NOR or NAND flash
+
+* Patch by Bill Hargen, 11 Aug 2003:
+ fixes for I2C on MPC8240
+ - fix i2c_write routine
+ - fix iprobe command
+ - eliminates use of global variables, plus dead code, cleanup.
+
+* Add support for USB Mass Storage Devices (BBB)
+ (tested with USB memory sticks only)
+
+* Avoid flicker on TRAB's VFD
+
+* Add support for SK98xx driver
+
+* Add PCI support for SL8245 board
+
+* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
+ or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
+ Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
+
+* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
+ to allow for more accurate baudrate settings
+ (error now 0.7% at 115 kbps, instead of 3.5% before)
+
+* Patch by Andreas Mohr, 4 Sep 2003:
+ Fix a lot of spelling errors
+
+* Add support for PPChameleon Eval Board
+
+* Add support for P3G4 board
+
+* Fix problem with MGT5100 FEC driver: add "early" MAC address
+ initialization
+
+* Patch by Yuli Barcohen, 7 Aug 2003:
+ check BCSR to detect if the board is configured in PCI mode
+
+======================================================================
+Changes for U-Boot 0.4.7:
+======================================================================
+
+* Patch by Raghu Krishnaprasad, 7 Aug 2003:
+ add support for Adder II MPC852T module
+
+* Patch by George G. Davis, 19 Aug 2003:
+ fix TI Innovator/OMAP1510 pin configs
+
+* Patches by Kshitij, 18 Aug 2003
+ - add support for arm926ejs cpu core
+ - add support for TI OMAP 1610 Innovator Board
+
+* Patch by Yuli Barcohen, 14 Aug 2003:
+ add support for bzip2 uncompression
+
+* Add GCC library to examples/Makefile so GCC utility functions will
+ be resolved, too
+
+* Add I2C and RTC support for RMU board using software I2C driver
+ (because of better response to iprobe command); fix problem with
+ "reset" command
+
+* Patch by Matthias Fuchs, 28 Aug 2003:
+ Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to
+ CONFIG_BOOTP_MAKS (see README).
+
+* Fix ICU862 environment problem
+
+* Fix RAM size detection for RMU board
+
+* Implement "reset" for MGT5100/MPC5200 systems
+
+======================================================================
+Changes for U-Boot 0.4.6:
+======================================================================
+
+* Make Ethernet autonegotiation on INCA-IP work for all clock rates;
+ allow selection of clock frequency as "make" target
+
+* Implement memory autosizing code for IceCube boards
+
+* Configure network port on INCA-IP for autonegotiation
+
+* Fix overflow problem in network timeout code
+
+* Patch by Richard Woodruff, 8 Aug 2003:
+ Allow crc32 to be used at address 0x000 (crc32_no_comp, too).
+
+======================================================================
+Changes for U-Boot 0.4.5:
+======================================================================
+
+* Update for TQM board defaults:
+ disable clocks_in_mhz, enable boot count limit
+
+* Removed tools/gdb from "make all" target. Added make target "gdbtools"
+ in toplevel directory instead. Removed astest.c from tools/gdb because
+ it is no longer relevant.
+
+* Fix PCI support for MPC5200 / IceCube Board
+
+* Map ISP1362 USB OTG controller for NSCU board
+
+* Patch by Brad Parker, 02 Aug 2003:
+ fix sc520_cdp problems
+
+* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements)
+
+* Allow erase command to cross flash bank boundaries
+
+* Patch by Scott McNutt, 21 Jul 2003:
+ Add support for LynuxWorks Kernel Downloadable Images (KDIs).
+ Both LynxOS and BlueCat linux KDIs are supported.
+
+* Patch by Richard Woodruff, 25 Jul 2003:
+ use more reliable reset for OMAP/925T
+
+* Patch by Nye Liu, 25 Jul 2003:
+ fix typo in mpc8xx.h
+
+* Patch by Richard Woodruff, 24 Jul 2003:
+ Fixes for cmd_nand.c:
+ - Fixed null dereferece which could result in incorrect ECC values.
+ - Added support for devices with no Ready/Busy signal hooked up.
+ - Added OMAP1510 read/write protect handling.
+ - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock
+ for non-JFFS2.
+ - Switched default ECC to be JFFS2.
+
+* Allow crc32 to be used at address 0x000
+
+* Provide consistent interface to standalone applications to access
+ the 'global_data' structure
+ Provide a doc/README.standalone more useful to users/developers.
+
+* Make IceCube MGT5100 FEC driver work
+
+* Implement new mechanism to export U-Boot's functions to standalone
+ applications: instead of using (PPC-specific) system calls we now
+ use a jump table; please see doc/README.standalone for details
+
+* Patch by Dave Westwood, 24 Jul 2003:
+ added support for Unity OS (a proprietary OS)
+
+* Patch by Detlev Zundel, 23 Jul 2003:
+ add "imls" command to print flash table of contents
+
+* Fix cold boot detection for log buffer reset
+
+* Return error for invalid length specifiers with "cp.X" etc.
+
+* Fix startup problem on MIPS
+
+* Allow for CONFIG_SPLASH_SCREEN even when no explicit
+ bitmap support is configured
+
+* Patch by Bill Hargen, 18 Jul 2003:
+ - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c
+
+* Patch by Denis Peter, 18 Jul 2003:
+ - fix memory configuration for MIP405T
+ - fix printout of baudrate for "loadb <loadaddr> <baudrate>"
+
+* Cleanup of TQM82xx configurations; use "official" board types
+ to make selection easier.
+
+* Patch by Martin Krause, 17 Jul 2003:
+ add delay to get I2C working with "imm" command and s3c24x0_i2c.c
+
+* Patch by Richard Woodruff, 17 July 03:
+ - Fixed bug in OMAP1510 baud rate divisor settings.
+
+* Patch by Nye Liu, 16 July 2003:
+ MPC860FADS fixes:
+ - add MPC86xADS support (uses MPC86xADS.h)
+ - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T)
+ o PLPRCR changes
+ o BRG changes (EXTAL/XTAL restricted to 10MHz)
+ o don't trust gclk() software measurement by default, depend on
+ CONFIG_8xx_GCLK_FREQ
+ - add DRAM SIMM not installed detection
+ - use more "correct" SDRAM initialization sequence
+ - allow different SDRAM sizes (8xxADS has 8M)
+ - default DER is 0
+ - remove unused MAMR defines from FADS860T.h (all done in fads.c)
+ - rename MAMR/MBMR defines to be more consistent. Should eventually
+ be merged into MxMR to better reflect the PowerQUICC datasheet.
+
+* Patch by Yuli Barcohen, 16 Jul 2003:
+ support new Motorola PQ2FADS-ZU evaluation board which replaced
+ MPC8260ADS and MPC8266ADS
+
+======================================================================
+Changes for U-Boot 0.4.4:
+======================================================================
+
+* Add support for IceCube board (with MGT5100 and MPC5200 CPUs)
+
+* Add support for MGT5100 and MPC5200 processors
+
+* Patch by Lutz Dennig, 15 Jul 2003:
+ update for R360MPI board
+
+======================================================================
+Changes for U-Boot 0.4.3:
+======================================================================
+
+* Patches by Kshitij, 04 Jul 2003
+ - added support for arm925t cpu core
+ - added support for TI OMAP 1510 Innovator Board
+
+* Patches by Martin Krause, 14 Jul 2003:
+ - add I2C support for s3c2400 systems (trab board)
+ - (re-) add "ping" to command table
+
+* Fix handling of "slow" POST routines
+
+* Patches by Yuli Barcohen, 13 Jul 2003:
+ - Correct flash and JFFS2 support for MPC8260ADS
+ - fix PVR values and clock generation for PowerQUICC II family
+ (8270/8275/8280)
+
+* Patch by Bernhard Kuhn, 08 Jul 2003:
+ - add support for M68K targets
+
+* Patch by Ken Chou, 3 Jul:
+ - Fix PCI config table for A3000
+ - Fix iobase for natsemi.c
+ (PCI_BASE_ADDRESS_0 is the IO base register for DP83815)
+
+* Allow to enable "slow" POST routines by key press on power-on
+* Fix temperature dependend switching of LCD backlight on LWMON
+* Tweak output format for LWMON
+
+* Patch by Stefan Roese, 11 Jul 2003:
+ - Fix bug in CONFIG_VERSION_VARIABLE.
+ - AR405 config updated.
+ - OCRTC/ORSG: bsp command added.
+ - ASH405 bsp update.
+
+======================================================================
+Changes for U-Boot 0.4.2:
+======================================================================
+
+* Add support for NSCU board
+
+* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules
+
+* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML
+ mirror bit flash on TQM8xxM modules
+
+* Patch by Kenneth Johansson, 30 Jun 2003:
+ get rid of MK_CMD_ENTRY macro; update doc/README.command
+
+* Patch by Seb James, 30 Jun 2003:
+ Improve documentation of I2C configuration in README
+
+* Fix problems with previous log buffer "fixes"
+
+* Fix minor help text issues
+
+* "log append" did not append a newline
+
+======================================================================
+Changes for U-Boot 0.4.1:
+======================================================================
+
+* Fix some missing commands, cleanup header files
+ (autoscript, bmp, bsp, fat, mmc, nand, portio, ...)
+
* Rewrite command lookup and help command (fix problems with bubble
sort when sorting command name list). Minor cleanup here and there.
- PIC on LWMON board needs delay after power-on
- Add missing RSR definitions for MPC8xx
- Improve log buffer handling: guarantee clean reset after power-on
- - Add support for EXBITGEN board
+ - Add support for EXBITGEN board (aka "genie")
- Add support for SL8245 board
* Code cleanup:
projects / karo-tx-uboot.git / blobdiff