Add support for SRAM and 2 x Quad UARTs on INKA4x0 board

[karo-tx-uboot.git] / CHANGELOG

diff --git a/CHANGELOG b/CHANGELOG
index 36e8c2ec65312fefb6ae4ea81473c49ad6410d08..5db2e2c5689e649b76c01885d637b8674d14d94d 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,92 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board
+
+* Cleanup USB and partition defines
+
+* Add support for ext2 filesystems and image timestamps to TQM5200 board
+
+* Add reset code for Coral-P on INKA4x0 board
+
+* Patch by Martin Krause, 28 Jun 2004:
+  Update for TRAB board.
+
+* Fix some missing "volatile"s in MPC5xxx FEC driver
+
+* Fix cirrus voltage detection (for CPC45)
+
+* Fix byteorder problem in usbboot and scsiboot commands.
+
+* Patch by Cajus Hahn, 04 Feb 2005:
+  - don't insist on leading '/' for filename in ext2load
+  - set default partition to useful value (1) in ext2load
+
+* Patch by Andrew Dyer, 08 Jan 2005:
+  fix wrong return codes in ext2 code
+
+* Removed '--no-warn-mismatch' option from Makefile. This option
+  makes 'ld' to overlook binary objects compatibility.
+
+* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
+  --end-group) outside of the group. This will make 'ld' to do
+  _multiple_ search in the library group when resolving symbol
+  references and do only a _single_ seach in libgcc.a after the group
+  search.
+
+* Fix stability problems on CPC45 board again.
+
+* Make image detection for diskboot / usbboot / scsiboot more robust
+  (also check header checksum)
+
+* Update CPC45 board configuration.
+
+* Add USB and PCI support for INKA4x0 board
+
+* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO).
+
+* Code cleanup
+
+* Patch by Robin Getz, 13 Oct 2004:
+  Add standalone application to change SMC91C111 MAC addresses,
+  see examples/README.smc91111_eeprom
+
+* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
+  Fix Flash support for ARM Integrator CP.
+
+* Patch by Richard Woodruff, 10 Jan 2005:
+  Update support for OMAP2420 (ARM11) and H4 board:
+  o clean up and add new types to H4 memory probe code.
+  o fix to work with internal boot.
+  o added PRCM config III operation.
+  o fix marginal flash timings.
+  o add revison ATAG usage.
+  o enable voltage scaling at power chip.
+  o fix compile error for i2c.
+
+* Fix network problem (error when receiving multiple ARP packets)
+
+* Patch by Daniel Poirot, 12 Oct 2004:
+  Add support for Wind River sbc405 board
+
+* Patch by Rainer Brestan, 12 Oct 2004:
+  Make examples/Makefile more robust
+
+* Patch by Sam Song, 11 October 2004:
+  - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
+  - Adjust CPU:BUS frequency ratio 1:1 when core frequency
+    less than 50MHz
+
+* Patch by Sam Song, 10 Oct 2004:
+  Fix a parameter error in run_command() in main.c
+
+* Patch by Richard Woodruff, 01 Oct 2004:
+  add support for the TI OMAP2420 processor and its H4 reference
+  board
+
+* Patch by Christian Pellegrin, 24 Sep 2004:
+  Added support for NE2000 compatible (DP8390, DP83902) NICs.
+
 * Patch by Leif Lindholm, 23 Sep 2004:
   add support for the AMD db1550 board