Add PCI support for MPC8250 Boards (PM825 module)

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index da70cf25cc322c416d40bddf9cc7bd31c612b2f1..6e6a44d33471d4db55452def24b40d88871d4420 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -53,27 +53,18 @@ ifndef CROSS_COMPILE
 ifeq ($(HOSTARCH),ppc)
 CROSS_COMPILE =
 else
-##  #ifeq ($(CPU),mpc8xx)
-##  CROSS_COMPILE = ppc_8xx-
-##  #endif
-##  #ifeq ($(CPU),ppc4xx)
-##  #CROSS_COMPILE = ppc_4xx-
-##  #endif
-##  #ifeq ($(CPU),mpc824x)
-##  #CROSS_COMPILE = ppc_82xx-
-##  #endif
-##  #ifeq ($(CPU),mpc8260)
-##  #CROSS_COMPILE = ppc_82xx-
-##  #endif
-##  #ifeq ($(CPU),74xx_7xx)
-##  #CROSS_COMPILE = ppc_74xx-)
-##  #endif
 ifeq ($(ARCH),ppc)
 CROSS_COMPILE = ppc_8xx-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm_920TDI-
 endif
+ifeq ($(ARCH),i386)
+#CROSS_COMPILE = i386-elf-
+endif
+ifeq ($(ARCH),mips)
+CROSS_COMPILE = mips_4KC-
+endif
 endif
 endif
 
@@ -100,7 +91,10 @@ SUBDIRS     = tools \
 # U-Boot objects....order is important (i.e. start must be first)
 
 OBJS  =        cpu/$(CPU)/start.o
-
+ifeq ($(CPU),i386)
+OBJS +=        cpu/$(CPU)/start16.o
+OBJS +=        cpu/$(CPU)/reset.o
+endif
 ifeq ($(CPU),ppc4xx)
 OBJS +=        cpu/$(CPU)/resetvec.o
 endif
@@ -108,7 +102,7 @@ endif
 LIBS  =        board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
 LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/jffs2/libjffs2.a
+LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
@@ -123,8 +117,8 @@ LIBS += lib_generic/libgeneric.a
 all:           u-boot.srec u-boot.bin System.map
 
 install:       all
-               cp u-boot.bin /tftpboot/u-boot.bin
-               cp u-boot.bin /net/sam/tftpboot/u-boot.bin
+               -cp u-boot.bin /tftpboot/u-boot.bin
+               -cp u-boot.bin /net/denx/tftpboot/u-boot.bin
 
 u-boot.srec:   u-boot
                $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
@@ -136,7 +130,9 @@ u-boot.dis: u-boot
                $(OBJDUMP) -d $< > $@
 
 u-boot:                depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT)
-               $(LD) $(LDFLAGS) $(OBJS) $(LIBS) $(LIBS) -Map u-boot.map -o u-boot
+               $(LD) $(LDFLAGS) $(OBJS) \
+                       --start-group $(LIBS) --end-group \
+                       -Map u-boot.map -o u-boot
 
 subdirs:
                @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done
@@ -191,6 +187,9 @@ CCM_config:         unconfig
 cogent_mpc8xx_config:  unconfig
        @./mkconfig $(@:_config=) ppc mpc8xx cogent
 
+ELPT860_config:                unconfig
+       @./mkconfig $(@:_config=) ppc mpc8xx elpt860 LEOX
+
 ESTEEM192E_config:     unconfig
        @./mkconfig $(@:_config=) ppc mpc8xx esteem192e
 
@@ -264,6 +263,9 @@ IVMS8_config:       unconfig
                 }
        @./mkconfig -a IVMS8 ppc mpc8xx ivm
 
+KUP4K_config   :       unconfig
+       @./mkconfig $(@:_config=) ppc mpc8xx kup4k
+
 LANTEC_config  :       unconfig
        @./mkconfig $(@:_config=) ppc mpc8xx lantec
 
@@ -315,6 +317,10 @@ SPD823TS_config:   unconfig
 SXNI855T_config:       unconfig
        @./mkconfig $(@:_config=) ppc mpc8xx sixnet
 
+# EMK MPC8xx based modules
+TOP860_config:         unconfig
+       @./mkconfig $(@:_config=) ppc mpc8xx top860 emk
+
 # Play some tricks for configuration selection
 # All boards can come with 50 MHz (default), 66MHz or 80MHz clock,
 # but only 855 and 860 boards may come with FEC
@@ -369,6 +375,11 @@ TTTech_config:     unconfig
        @echo "#define CONFIG_SHARP_LQ104V7DS01" >>include/config.h
        @./mkconfig -a TQM823L ppc mpc8xx tqm8xx
 
+v37_config:    unconfig
+       @echo "#define CONFIG_LCD" >include/config.h
+       @echo "#define CONFIG_SHARP_LQ084V1DG21" >>include/config.h
+       @./mkconfig $(@:_config=) ppc mpc8xx v37
+
 #########################################################################
 ## PPC4xx Systems
 #########################################################################
@@ -434,9 +445,24 @@ WALNUT405_config:unconfig
 #########################################################################
 ## MPC824x Systems
 #########################################################################
+xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
+
 BMW_config: unconfig
        @./mkconfig $(@:_config=) ppc mpc824x bmw
 
+CPC45_config   \
+CPC45_ROMBOOT_config:  unconfig
+       @./mkconfig $(call xtract_82xx,$@) ppc mpc824x cpc45
+       @cd ./include ;                         \
+       if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
+               echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
+               echo "... booting from 8-bit flash" ; \
+       else \
+               echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
+               echo "... booting from 64-bit flash" ; \
+       fi; \
+       echo "export CONFIG_BOOT_ROM" >> config.mk;
+
 CU824_config: unconfig
        @./mkconfig $(@:_config=) ppc mpc824x cu824
 
@@ -464,7 +490,6 @@ utx8245_config: unconfig
 #########################################################################
 ## MPC8260 Systems
 #########################################################################
-xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
 
 cogent_mpc8260_config: unconfig
        @./mkconfig $(@:_config=) ppc mpc8260 cogent
@@ -497,6 +522,9 @@ IPHASE4539_config:  unconfig
 MPC8260ADS_config:     unconfig
        @./mkconfig $(@:_config=) ppc mpc8260 mpc8260ads
 
+MPC8266ADS_config:     unconfig
+       @./mkconfig $(@:_config=) ppc mpc8260 mpc8266ads
+
 PM826_config   \
 PM826_ROMBOOT_config: unconfig
        @./mkconfig $(call xtract_82xx,$@) ppc mpc8260 pm826
@@ -555,6 +583,9 @@ TQM8260_300MHz_config:      unconfig
 ## 74xx/7xx Systems
 #########################################################################
 
+AmigaOneG3SE_config:   unconfig
+       @./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+
 EVB64260_config        \
 EVB64260_750CX_config: unconfig
        @./mkconfig EVB64260 ppc 74xx_7xx evb64260
@@ -592,14 +623,25 @@ shannon_config    :       unconfig
 ## ARM920T Systems
 #########################################################################
 
+xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
+
 smdk2400_config        :       unconfig
        @./mkconfig $(@:_config=) arm arm920t smdk2400
 
 smdk2410_config        :       unconfig
        @./mkconfig $(@:_config=) arm arm920t smdk2410
 
-trab_config :          unconfig
-       @./mkconfig $(@:_config=) arm arm920t trab
+trab_config \
+trab_big_flash_config: unconfig
+       @ >include/config.h
+       @[ -z "$(findstring _big_flash,$@)" ] || \
+               { echo "#define CONFIG_BIG_FLASH" >>include/config.h ; \
+                 echo "... with big flash support" ; \
+               }
+       @./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
+
+VCMA9_config   :       unconfig
+       @./mkconfig $(@:_config=) arm arm920t vcma9 mpl
 
 #########################################################################
 ## ARM720T Systems
@@ -612,19 +654,41 @@ ep7312_config     :       unconfig
        @./mkconfig $(@:_config=) arm arm720t ep7312
 
 #########################################################################
-## Xscale Systems
+## XScale Systems
 #########################################################################
 
-lubbock_config :       unconfig
-       @./mkconfig $(@:_config=) arm xscale lubbock
-
 cradle_config  :       unconfig
        @./mkconfig $(@:_config=) arm xscale cradle
 
 csb226_config  :       unconfig
        @./mkconfig $(@:_config=) arm xscale csb226
 
+innokom_config :       unconfig
+       @./mkconfig $(@:_config=) arm xscale innokom
+
+lubbock_config :       unconfig
+       @./mkconfig $(@:_config=) arm xscale lubbock
+
+#========================================================================
+# i386
+#========================================================================
+#########################################################################
+## AMD SC520 CDP
 #########################################################################
+sc520_cdp_config       :       unconfig
+       @./mkconfig $(@:_config=) i386 i386 sc520_cdp
+
+#========================================================================
+# MIPS
+#========================================================================
+#########################################################################
+## MIPS32 4Kc
+#########################################################################
+
+incaip_config :                unconfig
+       @./mkconfig $(@:_config=) mips mips incaip
+
+
 
 clean:
        find . -type f \
@@ -635,6 +699,7 @@ clean:
        rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
        rm -f tools/easylogo/easylogo tools/bmp_logo
        rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
+       rm -f tools/env/fw_printenv tools/env/fw_setenv
 
 clobber:       clean
        find . -type f \
@@ -644,7 +709,8 @@ clobber:    clean
        rm -f $(OBJS) *.bak tags TAGS
        rm -fr *.*~
        rm -f u-boot u-boot.bin u-boot.elf u-boot.srec u-boot.map System.map
-       rm -f tools/crc32.c tools/environment.c
+       rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
+       rm -f cpu/mpc824x/bedbug_603e.c
        rm -f include/asm/arch include/asm
 
 mrproper \