VERSION = 2014
PATCHLEVEL = 04
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME =
# *DOCUMENTATION*
export srctree objtree VPATH
-OBJTREE := $(objtree)
-SPLTREE := $(OBJTREE)/spl
-TPLTREE := $(OBJTREE)/tpl
-SRCTREE := $(srctree)
-TOPDIR := $(SRCTREE)
-export TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE
-
-MKCONFIG := $(SRCTREE)/mkconfig
+MKCONFIG := $(srctree)/mkconfig
export MKCONFIG
# Make sure CDPATH settings don't interfere
UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
-export ARCH CPU BOARD VENDOR SOC
+export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
export MAKE AWK
export DTC CHECK CHECKFLAGS
-export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE
+export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
export KBUILD_CFLAGS KBUILD_AFLAGS
# When compiling out-of-tree modules, put MODVERDIR in the module
no-dot-config-targets := clean clobber mrproper distclean \
help %docs check% coccicheck \
- backup
+ ubootversion backup
config-targets := 0
mixed-targets := 0
$(error "System not configured - see README")
endif
-ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
-ifneq ($(CONFIG_SYS_GENERIC_BOARD),)
-$(error Your architecture does not support generic board. \
-Please undefined CONFIG_SYS_GENERIC_BOARD in your board config file)
-endif
-endif
-
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
# that (or fail if absent). Otherwise, search for a linker script in a
# standard location.
-LDSCRIPT_MAKEFILE_DIR = $(dir $(LDSCRIPT))
-
ifndef LDSCRIPT
- #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
+ #LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds.debug
ifdef CONFIG_SYS_LDSCRIPT
# need to strip off double quotes
- LDSCRIPT := $(CONFIG_SYS_LDSCRIPT:"%"=%)
+ LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
endif
endif
# If there is no specified link script, we look in a number of places for it
ifndef LDSCRIPT
ifeq ($(CONFIG_NAND_U_BOOT),y)
- LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
+ LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-nand.lds
ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
+ LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-nand.lds
endif
endif
ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
- endif
- ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
+ LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
- LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
- # We don't expect a Makefile here
- LDSCRIPT_MAKEFILE_DIR =
+ LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
-$(error could not find linker script)
+ LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot.lds
endif
endif
# Use UBOOTINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
-UBOOTINCLUDE :=
-ifneq ($(OBJTREE),$(SRCTREE))
-UBOOTINCLUDE += -I$(OBJTREE)/include
-endif
-UBOOTINCLUDE += -I$(srctree)/include \
+UBOOTINCLUDE := \
+ -Iinclude \
+ $(if $(KBUILD_SRC), -I$(srctree)/include) \
-I$(srctree)/arch/$(ARCH)/include
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# FIX ME
-cpp_flags := $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(UBOOTINCLUDE) $(NOSTDINC_FLAGS)
+cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
+ $(NOSTDINC_FLAGS)
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
#########################################################################
libs-y += net/
libs-y += disk/
libs-y += drivers/
+libs-$(CONFIG_DM) += drivers/core/
libs-y += drivers/dma/
libs-y += drivers/gpio/
libs-y += drivers/i2c/
libs-$(CONFIG_API) += api/
libs-$(CONFIG_HAS_POST) += post/
libs-y += test/
+libs-y += test/dm/
+libs-$(CONFIG_DM_DEMO) += drivers/demo/
ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
libs-y += arch/$(ARCH)/imx-common/
libs-$(CONFIG_ARM) += arch/arm/cpu/
libs-$(CONFIG_PPC) += arch/powerpc/cpu/
-libs-y += board/$(BOARDDIR)/
+libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-y := $(sort $(libs-y))
# Add GCC lib
-ifdef USE_PRIVATE_LIBGCC
-ifeq ("$(USE_PRIVATE_LIBGCC)", "yes")
-PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/lib.a
+ifdef CONFIG_USE_PRIVATE_LIBGCC
+ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
+PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
else
-PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc
+PLATFORM_LIBGCC = -L $(CONFIG_USE_PRIVATE_LIBGCC) -lgcc
endif
else
PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
- -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
+ -include $(srctree)/include/u-boot/u-boot.lds.h \
-DCPUDIR=$(CPUDIR) \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
-ALL-$(CONFIG_OF_SEPARATE) += u-boot-dtb.bin
+ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
+ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
ifneq ($(CONFIG_SPL_TARGET),)
ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
endif
endif
endif
-LDFLAGS_u-boot += -T u-boot.lds $(LDFLAGS_FINAL)
+LDFLAGS_u-boot += $(LDFLAGS_FINAL)
ifneq ($(CONFIG_SYS_TEXT_BASE),)
LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
endif
+quiet_cmd_objcopy = OBJCOPY $@
+cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+quiet_cmd_mkimage = UIMAGE $@
+cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
+ $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+
+quiet_cmd_cat = CAT $@
+cmd_cat = cat $(filter-out $(PHONY), $^) > $@
+
+append = cat $(filter-out $< $(PHONY), $^) >> $@
+
+quiet_cmd_pad_cat = CAT $@
+cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
+
all: $(ALL-y)
PHONY += dtbs
dtbs dts/dt.dtb: checkdtc u-boot
$(Q)$(MAKE) $(build)=dts dtbs
-u-boot-dtb.bin: u-boot.bin dts/dt.dtb
- cat $^ >$@
+u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
-u-boot.hex: u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
+%.imx: %.bin
+ $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
-u-boot.srec: u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
+quiet_cmd_copy = COPY $@
+ cmd_copy = cp $< $@
-u-boot.bin: u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
- $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
- $(BOARD_SIZE_CHECK)
+u-boot.dtb: dts/dt.dtb
+ $(call cmd,copy)
+
+OBJCOPYFLAGS_u-boot.hex := -O ihex
+
+OBJCOPYFLAGS_u-boot.srec := -O srec
+
+u-boot.hex u-boot.srec: u-boot FORCE
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_u-boot.bin := -O binary
+
+u-boot.bin: u-boot FORCE
+ $(call if_changed,objcopy)
+ $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
+ $(BOARD_SIZE_CHECK)
u-boot.ldr: u-boot
$(CREATE_LDR_ENV)
$(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
$(BOARD_SIZE_CHECK)
-u-boot.ldr.hex: u-boot.ldr
- $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary
+OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
-u-boot.ldr.srec: u-boot.ldr
- $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary
+OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
+
+u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
+ $(call if_changed,objcopy)
#
# U-Boot entry point, needed for booting of full-blown U-Boot
CONFIG_SYS_UBOOT_START := 0
endif
-u-boot.img: u-boot.bin
- tools/mkimage -A $(ARCH) -T firmware -C none \
- -O u-boot -a $(CONFIG_SYS_TEXT_BASE) \
- -e $(CONFIG_SYS_UBOOT_START) \
- -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board" \
- -d $< $@
+MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+ -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
-u-boot.imx: u-boot.bin
- $(MAKE) $(build)=arch/arm/imx-common $(objtree)/u-boot.imx
+MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+ -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
-u-boot.kwb: u-boot.bin
- tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
- -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
+MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
+ -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
-u-boot.pbl: u-boot.bin
- tools/mkimage -n $(CONFIG_SYS_FSL_PBL_RCW) \
- -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage \
- -d $< $@
+u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
+ $(call if_changed,mkimage)
u-boot.sha1: u-boot.bin
tools/ubsha1 u-boot.bin
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
-# $@ is output, $(1) and $(2) are inputs, $(3) is padded intermediate,
-# $(4) is pad-to
-SPL_PAD_APPEND = \
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(4) -I binary -O binary \
- $(1) $(3); \
- cat $(3) $(2) > $@; \
- rm $(3)
-
ifdef CONFIG_TPL
SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
else
SPL_PAYLOAD := u-boot.bin
endif
-u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD)
- $(call SPL_PAD_APPEND,$<,$(SPL_PAYLOAD),spl/u-boot-spl-pad.bin,$(CONFIG_SPL_PAD_TO))
+OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_SPL_PAD_TO)
+u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
+ $(call if_changed,pad_cat)
+
+OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
+ --pad-to=$(CONFIG_TPL_PAD_TO)
+tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
+ $(call if_changed,pad_cat)
-tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin
- $(call SPL_PAD_APPEND,$<,u-boot.bin,tpl/u-boot-tpl-pad.bin,$(CONFIG_TPL_PAD_TO))
+SPL: spl/u-boot-spl.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
-u-boot-with-spl.imx: spl/u-boot-spl.bin u-boot.bin
- $(MAKE) $(build)=arch/arm/imx-common \
- $(OBJTREE)/u-boot-with-spl.imx
+u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
+ $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
-u-boot-with-nand-spl.imx: spl/u-boot-spl.bin u-boot.bin
- $(MAKE) $(build)=arch/arm/imx-common \
- $(OBJTREE)/u-boot-with-nand-spl.imx
+MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
-u-boot.ubl: u-boot-with-spl.bin
- tools/mkimage -n $(UBL_CONFIG) -T ublimage \
- -e $(CONFIG_SYS_TEXT_BASE) -d $< u-boot.ubl
+u-boot.ubl: u-boot-with-spl.bin FORCE
+ $(call if_changed,mkimage)
-u-boot.ais: spl/u-boot-spl.bin u-boot.img
- tools/mkimage -s -n $(if $(CONFIG_AIS_CONFIG_FILE),$(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
- -T aisimage \
- -e $(CONFIG_SPL_TEXT_BASE) \
- -d spl/u-boot-spl.bin \
- spl/u-boot-spl.ais
- $(OBJCOPY) ${OBJCFLAGS} -I binary \
- --pad-to=$(CONFIG_SPL_MAX_SIZE) -O binary \
- spl/u-boot-spl.ais spl/u-boot-spl-pad.ais
- cat spl/u-boot-spl-pad.ais u-boot.img > u-boot.ais
+MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
+ $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
+ -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
+spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE)
+u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
+ $(call if_changed,pad_cat)
-u-boot.sb: u-boot.bin spl/u-boot-spl.bin
- $(MAKE) $(build)=$(CPUDIR)/$(SOC)/ $(OBJTREE)/u-boot.sb
+u-boot.sb: u-boot.bin spl/u-boot-spl.bin
+ $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
# The resulting image containing both U-Boot images is called u-boot.spr
-u-boot.spr: u-boot.img spl/u-boot-spl.bin
- tools/mkimage -A $(ARCH) -T firmware -C none \
- -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER \
- -d spl/u-boot-spl.bin $@
- $(OBJCOPY) -I binary -O binary \
- --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff $@
- cat u-boot.img >> $@
+MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
+ -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
+spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
+ --gap-fill=0xff
+u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
+ $(call if_changed,pad_cat)
ifneq ($(CONFIG_TEGRA),)
-u-boot-nodtb-tegra.bin: spl/u-boot-spl.bin u-boot.bin
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary spl/u-boot-spl spl/u-boot-spl-pad.bin
- cat spl/u-boot-spl-pad.bin u-boot.bin > $@
- rm spl/u-boot-spl-pad.bin
+OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
+u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
+ $(call if_changed,pad_cat)
ifeq ($(CONFIG_OF_SEPARATE),y)
-u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb
- cat $^ > $@
+u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE
+ $(call if_changed,cat)
endif
endif
-u-boot-img.bin: spl/u-boot-spl.bin u-boot.img
- cat spl/u-boot-spl.bin u-boot.img > $@
+u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
+ $(call if_changed,cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector
# is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
# and need to introduce a new build target with the full blown U-Boot
# at the start padded up to the start of the SPL image. And then concat
# the SPL image to the end.
-u-boot-img-spl-at-end.bin: spl/u-boot-spl.bin u-boot.img
- $(OBJCOPY) -I binary -O binary --pad-to=$(CONFIG_UBOOT_PAD_TO) \
- --gap-fill=0xff u-boot.img $@
- cat spl/u-boot-spl.bin >> $@
+
+OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
+ --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
+u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
+ $(call if_changed,pad_cat)
# Create a new ELF from a raw binary file. This is useful for arm64
# where static relocation needs to be performed on the raw binary,
--defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
-Ttext=$(CONFIG_SYS_TEXT_BASE)
-ifeq ($(CONFIG_SANDBOX),y)
-GEN_UBOOT = \
- $(CC) $(SYMS) -T u-boot.lds \
- -Wl,--start-group $(u-boot-main) -Wl,--end-group \
- $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
-else
-GEN_UBOOT = \
- $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
- $(u-boot-init) \
- --start-group $(u-boot-main) --end-group $(PLATFORM_LIBS) \
- -Map u-boot.map -o u-boot
-endif
+# Rule to link u-boot
+# May be overridden by arch/$(ARCH)/config.mk
+quiet_cmd_u-boot__ ?= LD $@
+ cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
+ -T u-boot.lds $(u-boot-init) \
+ --start-group $(u-boot-main) --end-group \
+ $(PLATFORM_LIBS) -Map u-boot.map
u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
- $(GEN_UBOOT)
+ $(call if_changed,u-boot__)
ifeq ($(CONFIG_KALLSYMS),y)
- smap=`$(call SYSTEM_MAP,u-boot) | \
- awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
- $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
- -c $(srctree)/common/system_map.c -o common/system_map.o
- $(GEN_UBOOT) common/system_map.o
+ smap=`$(call SYSTEM_MAP,u-boot) | \
+ awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
+ $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
+ -c $(srctree)/common/system_map.c -o common/system_map.o
+ $(call cmd,u-boot__) common/system_map.o
endif
# The actual objects are generated when descending,
# Error messages still appears in the original language
PHONY += $(u-boot-dirs)
-$(u-boot-dirs): depend prepare scripts
+$(u-boot-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
tools: prepare
prepare2: prepare3 outputmakefile
prepare1: prepare2 $(version_h) $(timestamp_h)
- @:
+ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
+ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
+ @echo >&2 " Your architecture does not support generic board."
+ @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
+ @/bin/false
+endif
+endif
+ifeq ($(wildcard $(LDSCRIPT)),)
+ @echo >&2 " Could not find linker script."
+ @/bin/false
+endif
archprepare: prepare1 scripts_basic
prepare0: archprepare FORCE
- @:
+ $(Q)$(MAKE) $(build)=.
# All the preparing..
prepare: prepare0
LC_ALL=C date +'#define U_BOOT_TIME "%T"')
endef
-$(version_h): $(srctree)/Makefile FORCE
+$(version_h): include/config/uboot.release FORCE
$(call filechk,version.h)
$(timestamp_h): $(srctree)/Makefile FORCE
include/autoconf.mk: include/config.h
$(call cmd,autoconf)
-u-boot.lds: $(LDSCRIPT) depend prepare
- $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
+# ---------------------------------------------------------------------------
-nand_spl: depend prepare
- $(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
+PHONY += depend dep
+depend dep:
+ @echo '*** Warning: make $@ is unnecessary now.'
-u-boot-nand.bin: nand_spl u-boot.bin
- cat nand_spl/u-boot-spl-16k.bin u-boot.bin > u-boot-nand.bin
+# ---------------------------------------------------------------------------
+quiet_cmd_cpp_lds = LDS $@
+cmd_cpp_lds = $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ \
+ -x assembler-with-cpp -P -o $@ $<
+
+u-boot.lds: $(LDSCRIPT) prepare FORCE
+ $(call if_changed,cpp_lds)
+
+PHONY += nand_spl
+nand_spl: prepare
+ $(Q)$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
+ @echo >&2
+ @echo >&2 "==================== WARNING ====================="
+ @echo >&2 "nand_spl will not be included in v2014.07 release."
+ @echo >&2 "Please switch over to SPL."
+ @echo >&2 "Otherwise, this board will be removed."
+ @echo >&2 "=================================================="
+ @echo >&2
+
+nand_spl/u-boot-spl-16k.bin: nand_spl
+ @:
-spl/u-boot-spl.bin: tools depend prepare
- $(MAKE) obj=spl -f $(srctree)/spl/Makefile all
+u-boot-nand.bin: nand_spl/u-boot-spl-16k.bin u-boot.bin FORCE
+ $(call if_changed,cat)
-tpl/u-boot-tpl.bin: tools depend prepare
- $(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
+spl/u-boot-spl.bin: spl/u-boot-spl
+ @:
+spl/u-boot-spl: tools prepare
+ $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
-# Explicitly make _depend in subdirs containing multiple targets to prevent
-# parallel sub-makes creating .depend files simultaneously.
-depend dep: \
- include/generated/generic-asm-offsets.h \
- include/generated/asm-offsets.h
+tpl/u-boot-tpl.bin: tools prepare
+ $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
TAG_SUBDIRS := $(u-boot-dirs) include
FIND := find
FINDFLAGS := -L
-PHONY += checkstack
-
-checkstack:
- $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
- $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
-
tags ctags:
ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
System.map: u-boot
@$(call SYSTEM_MAP,$<) > $@
-checkthumb:
- @if test $(call cc-version) -lt 0404; then \
- echo -n '*** Your GCC does not produce working '; \
- echo 'binaries in THUMB mode.'; \
- echo '*** Your board is configured for THUMB mode.'; \
- false; \
- fi
-
-# GCC 3.x is reported to have problems generating the type of relocation
-# that U-Boot wants.
-# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
-checkgcc4:
- @if test $(call cc-version) -lt 0400; then \
- echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
- false; \
- fi
-
checkdtc:
@if test $(call dtc-version) -lt 0104; then \
echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
false; \
fi
-quiet_cmd_offsets = GEN $@
- cmd_offsets = $(srctree)/tools/scripts/make-asm-offsets $< $@
-
-include/generated/generic-asm-offsets.h: lib/asm-offsets.s
- $(call cmd,offsets)
-
-quiet_cmd_asm-offsets.s = CC $@
- cmd_asm-offsets.s = mkdir -p lib; \
- $(CC) -DDO_DEPS_ONLY \
- $(c_flags) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
- -o $@ $< -c -S
-
-lib/asm-offsets.s: $(srctree)/lib/asm-offsets.c include/config.h
- $(call cmd,asm-offsets.s)
-
-include/generated/asm-offsets.h: $(CPUDIR)/$(SOC)/asm-offsets.s
- $(call cmd,offsets)
-
-quiet_cmd_soc_asm-offsets.s = CC $@
- cmd_soc_asm-offsets.s = mkdir -p $(CPUDIR)/$(SOC); \
- if [ -f $(srctree)/$(CPUDIR)/$(SOC)/asm-offsets.c ];then \
- $(CC) -DDO_DEPS_ONLY \
- $(c_flags) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \
- -o $@ $(srctree)/$(CPUDIR)/$(SOC)/asm-offsets.c -c -S; \
- else \
- touch $@; \
- fi
-
-$(CPUDIR)/$(SOC)/asm-offsets.s: include/config.h
- $(call cmd,soc_asm-offsets.s)
-
#########################################################################
# ARM relocations should all be R_ARM_RELATIVE (32-bit) or
env: scripts_basic
$(Q)$(MAKE) $(build)=tools/$@
-tools-all: HOST_TOOLS_ALL=y
+tools-all: export HOST_TOOLS_ALL=y
tools-all: env tools ;
+cross_tools: export CROSS_BUILD_TOOLS=y
+cross_tools: tools ;
+
.PHONY : CHANGELOG
CHANGELOG:
git log --no-merges U-Boot-1_1_5.. | \
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR)
CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \
- board/*/config.tmp board/*/*/config.tmp \
include/autoconf.mk* include/spl-autoconf.mk \
include/tpl-autoconf.mk
@find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
- -o -name '.*.rej' \
+ -o -name '.*.rej' -o -name '*.pyc' \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
backup:
- F=`basename $(TOPDIR)` ; cd .. ; \
+ F=`basename $(srctree)` ; cd .. ; \
gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
+help:
+ @echo 'Cleaning targets:'
+ @echo ' clean - Remove most generated files but keep the config and'
+ @echo ' necessities for testing u-boot'
+ @echo ' clobber - Remove most generated files but keep the config'
+ @echo ' mrproper - Remove all generated files + config + various backup files'
+ @echo ' distclean - mrproper + remove editor backup and patch files'
+ @echo ''
+# uncomment after adding Kconfig feature
+# @echo 'Configuration targets:'
+# @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
+# @echo ''
+ @echo 'Other generic targets:'
+ @echo ' all - Build all necessary images depending on configuration'
+ @echo ' u-boot - Build the bare u-boot'
+ @echo ' dir/ - Build all files in dir and below'
+ @echo ' dir/file.[oisS] - Build specified target only'
+ @echo ' dir/file.lst - Build specified mixed source/assembly target only'
+ @echo ' (requires a recent binutils and recent build (System.map))'
+ @echo ' tags/TAGS - Generate tags file for editors'
+ @echo ' cscope - Generate cscope index'
+ @echo ' ubootrelease - Output the release version string'
+ @echo ' ubootversion - Output the version stored in Makefile'
+ @echo ''
+ @echo 'Static analysers'
+ @echo ' checkstack - Generate a list of stack hogs'
+ @echo ''
+ @echo 'Documentation targets:'
+ @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
+ @echo ''
+ @echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
+ @echo ' make V=2 [targets] 2 => give reason for rebuild of target'
+ @echo ' make O=dir [targets] Locate all output files in "dir", including .config'
+ @echo ' make C=1 [targets] Check all c source with $$CHECK (sparse by default)'
+ @echo ' make C=2 [targets] Force check of all c source with $$CHECK'
+ @echo ' make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
+ @echo ' make W=n [targets] Enable extra gcc checks, n=1,2,3 where'
+ @echo ' 1: warnings which may be relevant and do not occur too often'
+ @echo ' 2: warnings which occur quite often but may still be relevant'
+ @echo ' 3: more obscure warnings, can most likely be ignored'
+ @echo ' Multiple levels can be combined with W=12 or W=123'
+ @echo ''
+ @echo 'Execute "make" or "make all" to build all targets marked with [*] '
+ @echo 'For further info see the ./README file'
+
# Documentation targets
# ---------------------------------------------------------------------------
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
+PHONY += checkstack ubootrelease ubootversion
+
+checkstack:
+ $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
+ $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
+
+ubootrelease:
+ @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
+
+ubootversion:
+ @echo $(UBOOTVERSION)
+
+# Single targets
+# ---------------------------------------------------------------------------
+# Single targets are compatible with:
+# - build with mixed source and output
+# - build with separate output dir 'make O=...'
+# - external modules
+#
+# target-dir => where to store outputfile
+# build-dir => directory in kernel source tree to use
+
+ifeq ($(KBUILD_EXTMOD),)
+ build-dir = $(patsubst %/,%,$(dir $@))
+ target-dir = $(dir $@)
+else
+ zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
+ build-dir = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
+ target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
+endif
+
+%.s: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.i: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.lst: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.s: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.o: %.S prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+%.symtypes: %.c prepare scripts FORCE
+ $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
+
+# Modules
+/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%.ko: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir) $(@:.ko=.o)
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
+
+# FIXME Should go into a make.lib or something
+# ===========================================================================
+
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
cmd_rmdirs = rm -rf $(rm-dirs)
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -f $(rm-files)
+# read all saved command lines
+
+targets := $(wildcard $(sort $(targets)))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+ $(cmd_files): ; # Do not try to update included dependency files
+ include $(cmd_files)
+endif
+
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
projects / karo-tx-uboot.git / blobdiff