VERSION = 2015
-PATCHLEVEL = 01
+PATCHLEVEL = 10
SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
NAME =
# *DOCUMENTATION*
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
-# Do not use make's built-in rules and variables
-# (this increases performance and avoids hard-to-debug behaviour);
-MAKEFLAGS += -rR
+# o Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour);
+# o Look for make include files relative to root of kernel src
+MAKEFLAGS += -rR --include-dir=$(CURDIR)
# Avoid funny character set dependencies
unexport LC_ALL
HOSTCC = $(call os_x_before, 10, 5, "cc", "gcc")
HOSTCFLAGS += $(call os_x_before, 10, 4, "-traditional-cpp")
HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
+
+# since Lion (10.7) ASLR is on by default, but we use linker generated lists
+# in some host tools which is a problem then ... so disable ASLR for these
+# tools
+HOSTLDFLAGS += $(call os_x_before, 10, 7, "", "-Xlinker -no_pie")
endif
# Decide whether to build built-in, modular, or both.
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-# Look for make include files relative to root of kernel src
-MAKEFLAGS += --include-dir=$(srctree)
-
# We need some generic definitions (do not try to remake the file).
-$(srctree)/scripts/Kbuild.include: ;
-include $(srctree)/scripts/Kbuild.include
+scripts/Kbuild.include: ;
+include scripts/Kbuild.include
# Make variables (CC, etc...)
ifeq ($(KBUILD_EXTMOD),)
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
config-targets := 1
- ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
+ ifneq ($(words $(MAKECMDGOALS)),1)
mixed-targets := 1
endif
endif
export KBUILD_DEFCONFIG KBUILD_KCONFIG
config: scripts_basic outputmakefile FORCE
- +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
%config: scripts_basic outputmakefile FORCE
- +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
else
# ===========================================================================
# we execute the config step to be sure to catch updated Kconfig files
include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
+ @# If the following part fails, include/config/auto.conf should be
+ @# deleted so "make silentoldconfig" will be re-run on the next build.
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \
+ { rm -f include/config/auto.conf; false; }
+ @# include/config.h has been updated after "make silentoldconfig".
+ @# We need to touch include/config/auto.conf so it gets newer
+ @# than include/config.h.
+ @# Otherwise, 'make silentoldconfig' would be invoked twice.
+ $(Q)touch include/config/auto.conf
-include include/autoconf.mk
-include include/autoconf.mk.dep
# is up-to-date. When we switch to a different board configuration, old CONFIG
# macros are still remaining in include/config/auto.conf. Without the following
# gimmick, wrong config.mk would be included leading nasty warnings/errors.
-autoconf_is_current := $(if $(wildcard $(KCONFIG_CONFIG)),$(shell find . \
- -path ./include/config/auto.conf -newer $(KCONFIG_CONFIG)))
-ifneq ($(autoconf_is_current),)
-include $(srctree)/config.mk
-include $(srctree)/arch/$(ARCH)/Makefile
+ifneq ($(wildcard $(KCONFIG_CONFIG)),)
+ifneq ($(wildcard include/config/auto.conf),)
+autoconf_is_old := $(shell find . -path ./$(KCONFIG_CONFIG) -newer \
+ include/config/auto.conf)
+ifeq ($(autoconf_is_old),)
+include config.mk
+include arch/$(ARCH)/Makefile
+endif
+endif
endif
# If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
endif
KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
+KBUILD_CFLAGS += $(call cc-option,-fno-delete-null-pointer-checks)
KBUILD_CFLAGS += -g
# $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
export CONFIG_SYS_TEXT_BASE
-include $(srctree)/scripts/Makefile.extrawarn
+include scripts/Makefile.extrawarn
# Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments
KBUILD_CPPFLAGS += $(KCPPFLAGS)
drivers/power/fuel_gauge/ \
drivers/power/mfd/ \
drivers/power/pmic/ \
- drivers/power/battery/
+ drivers/power/battery/ \
+ drivers/power/regulator/
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
+libs-y += drivers/usb/dwc3/
+libs-y += drivers/usb/emul/
libs-y += drivers/usb/eth/
libs-y += drivers/usb/gadget/
+libs-y += drivers/usb/gadget/udc/
libs-y += drivers/usb/host/
libs-y += drivers/usb/musb/
libs-y += drivers/usb/musb-new/
libs-$(CONFIG_HAS_POST) += post/
libs-y += test/
libs-y += test/dm/
+libs-$(CONFIG_UT_ENV) += test/env/
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
endif
# Always append ALL so that arch config.mk's can add custom ones
-ALL-y += u-boot.srec u-boot.bin System.map binary_size_check
+ALL-y += u-boot.srec u-boot.bin System.map u-boot.cfg binary_size_check
ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
ifeq ($(CONFIG_SPL_FSL_PBL),y)
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot-with-spl-pbl.bin
else
+ifneq ($(CONFIG_SECURE_BOOT), y)
+# For Secure Boot The Image needs to be signed and Header must also
+# be included. So The image has to be built explicitly
ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
endif
+endif
ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
endif
ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
+ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
+ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
-# We can't do this yet due to the need for binary blobs
-# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+ifneq ($(BUILD_ROM),)
+ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+endif
# enable combined SPL/u-boot/dtb rules for tegra
ifneq ($(CONFIG_TEGRA),)
LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
endif
+# Normally we fill empty space with 0xff
quiet_cmd_objcopy = OBJCOPY $@
-cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+cmd_objcopy = $(OBJCOPY) --gap-fill=0xff $(OBJCOPYFLAGS) \
+ $(OBJCOPYFLAGS_$(@F)) $< $@
+
+# Provide a version which does not do this, for use by EFI
+quiet_cmd_zobjcopy = OBJCOPY $@
+cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+
+quiet_cmd_efipayload = OBJCOPY $@
+cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
quiet_cmd_mkimage = MKIMAGE $@
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
@echo "See doc/README.generic-board for further information"
@echo "===================================================="
endif
+ifeq ($(CONFIG_DM_I2C_COMPAT),y)
+ @echo "===================== WARNING ======================"
+ @echo "This board uses CONFIG_DM_I2C_COMPAT. Please remove"
+ @echo "(possibly in a subsequent patch in your series)"
+ @echo "before sending patches to the mailing list."
+ @echo "===================================================="
+endif
PHONY += dtbs
dtbs dts/dt.dtb: checkdtc u-boot
CONFIG_SYS_UBOOT_START := 0
endif
+# Create a file containing the configuration options the image was built with
+quiet_cmd_cpp_cfg = CFG $@
+cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
+ -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
+
MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
-a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
-n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
+ -T kwbimage -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE)
+
MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
$(call if_changed,mkimage)
+u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
u-boot-dtb.img: u-boot-dtb.bin FORCE
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
+u-boot.cfg: include/config.h
+ $(call if_changed,cpp_cfg)
+
ifdef CONFIG_TPL
SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
else
u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
$(call if_changed,pad_cat)
+MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
+
+lpc32xx-spl.img: spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+
+OBJCOPYFLAGS_lpc32xx-boot-0.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-0.bin: lpc32xx-spl.img
+ $(call if_changed,objcopy)
+
+OBJCOPYFLAGS_lpc32xx-boot-1.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO)
+
+lpc32xx-boot-1.bin: lpc32xx-spl.img
+ $(call if_changed,objcopy)
+
+lpc32xx-full.bin: lpc32xx-boot-0.bin lpc32xx-boot-1.bin u-boot.img
+ $(call if_changed,cat)
+
+CLEAN_FILES += lpc32xx-*
+
OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
--pad-to=$(CONFIG_TPL_PAD_TO)
tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot-signed.sb
-u-boot.sb: u-boot.bin spl/u-boot-spl.bin
+u-boot.sb: u-boot.bin spl/u-boot-spl.bin elftosb
$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
+elftosb:
+ $(MAKE) -C $(KBUILD_SRC)/tools/elftosb all
+
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
# bootloader can check its integrity. Padding needs to be done to the
$(call if_changed,mkimage)
@dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
+ifneq ($(CONFIG_ARCH_SOCFPGA),)
+quiet_cmd_socboot = SOCBOOT $@
+cmd_socboot = cat spl/u-boot-spl-dtb.sfp spl/u-boot-spl-dtb.sfp \
+ spl/u-boot-spl-dtb.sfp spl/u-boot-spl-dtb.sfp \
+ u-boot-dtb.img > $@ || rm -f $@
+u-boot-with-spl-dtb.sfp: spl/u-boot-spl-dtb.sfp u-boot-dtb.img FORCE
+ $(call if_changed,socboot)
+endif
+
# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
# the middle.
IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
endif
-ifneq ($(CONFIG_X86_OPTION_ROM_ADDR),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILE)
+ifneq ($(CONFIG_HAVE_VGA_BIOS),)
+IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
endif
quiet_cmd_ifdtool = IFDTOOL $@
endif
endif
+OBJCOPYFLAGS_u-boot-app.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-app.efi: u-boot FORCE
+ $(call if_changed,zobjcopy)
+
+u-boot-dtb.bin.o: u-boot-dtb.bin FORCE
+ $(call if_changed,efipayload)
+
+u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# Rule to link the EFI payload which contains a stub and a U-Boot binary
+quiet_cmd_u-boot_payload ?= LD $@
+ cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
+ -T u-boot-payload.lds arch/x86/cpu/call32.o \
+ lib/efi/efi.o lib/efi/efi_stub.o u-boot-dtb.bin.o \
+ $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
+
+u-boot-payload: u-boot-dtb.bin.o u-boot-payload.lds FORCE
+ $(call if_changed,u-boot_payload)
+
+OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-payload.efi: u-boot-payload FORCE
+ $(call if_changed,zobjcopy)
+
u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
$(call if_changed,cat)
prepare1: prepare2 $(version_h) $(timestamp_h) \
include/config/auto.conf
-ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
+ifeq ($(CONFIG_HAVE_GENERIC_BOARD),)
ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
@echo >&2 " Your architecture does not support generic board."
@echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
endef
define filechk_timestamp.h
- (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
- LC_ALL=C date +'#define U_BOOT_TIME "%T"')
+ (SOURCE_DATE="$${SOURCE_DATE_EPOCH:+@$$SOURCE_DATE_EPOCH}"; \
+ LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TZ "%z"' )
endef
$(version_h): include/config/uboot.release FORCE
$(timestamp_h): $(srctree)/Makefile FORCE
$(call filechk,timestamp.h)
-# ---------------------------------------------------------------------------
-
-PHONY += depend dep
-depend dep:
- @echo '*** Warning: make $@ is unnecessary now.'
-
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds = LDS $@
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
spl/u-boot-spl.bin: spl/u-boot-spl
@:
-spl/u-boot-spl: tools prepare
+spl/u-boot-spl: tools prepare $(if $(CONFIG_OF_SEPARATE),dts/dt.dtb)
$(Q)$(MAKE) obj=spl -f $(srctree)/scripts/Makefile.spl all
spl/sunxi-spl.bin: spl/u-boot-spl
@:
+spl/u-boot-spl-dtb.sfp: spl/u-boot-spl
+ @:
+
tpl/u-boot-tpl.bin: tools prepare
$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
tags ctags:
ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
-name '*.[chS]' -print`
+ ln -s ctags tags
etags:
etags -a -o etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
include $(cmd_files)
endif
-# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
-# Usage:
-# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(srctree)/scripts/Makefile.clean obj
-
endif # skip-makefile
PHONY += FORCE
projects / karo-tx-uboot.git / blobdiff