#
-# (C) Copyright 2000-2007
+# (C) Copyright 2000-2008
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
VERSION = 1
PATCHLEVEL = 3
-SUBLEVEL = 0
+SUBLEVEL = 1
EXTRAVERSION =
U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
VERSION_FILE = $(obj)include/version_autogenerated.h
# Deal with colliding definitions from tcsh etc.
VENDOR=
+#########################################################################
+# Allow for silent builds
+ifeq (,$(findstring s,$(MAKEFLAGS)))
+XECHO = echo
+else
+XECHO = :
+endif
+
#########################################################################
#
# U-boot build supports producing a object files to the separate external
#########################################################################
-ifeq ($(OBJTREE)/include/config.mk,$(wildcard $(OBJTREE)/include/config.mk))
+ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk))
# load ARCH, BOARD, and CPU configuration
-include $(OBJTREE)/include/config.mk
+include $(obj)include/config.mk
export ARCH CPU BOARD VENDOR SOC
ifndef CROSS_COMPILE
ifeq ($(ARCH),avr32)
CROSS_COMPILE = avr32-linux-
endif
-endif
-endif
+ifeq ($(ARCH),sh)
+CROSS_COMPILE = sh4-linux-
+endif # sh
+endif # HOSTARCH,ARCH
+endif # CROSS_COMPILE
export CROSS_COMPILE
LIBS += disk/libdisk.a
LIBS += drivers/bios_emulator/libatibiosemu.a
LIBS += drivers/block/libblock.a
+LIBS += drivers/dma/libdma.a
LIBS += drivers/hwmon/libhwmon.a
LIBS += drivers/i2c/libi2c.a
LIBS += drivers/input/libinput.a
LIBS += drivers/net/sk98lin/libsk98lin.a
LIBS += drivers/pci/libpci.a
LIBS += drivers/pcmcia/libpcmcia.a
+LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
endif
"post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
LIBS += common/libcommon.a
LIBS += libfdt/libfdt.a
+ifeq ($(CONFIG_API),y)
+LIBS += api/libapi.a
+endif
LIBS := $(addprefix $(obj),$(LIBS))
.PHONY : $(LIBS)
SUBDIRS = tools \
examples
+ifeq ($(CONFIG_API),y)
+SUBDIRS += api_examples
+endif
+
.PHONY : $(SUBDIRS)
ifeq ($(CONFIG_NAND_U_BOOT),y)
$(obj)u-boot.dis: $(obj)u-boot
$(OBJDUMP) -d $< > $@
-$(obj)u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
+$(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
-Map u-boot.map -o u-boot
-$(OBJS):
+$(OBJS): $(obj)include/autoconf.mk
$(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
-$(LIBS):
+$(LIBS): $(obj)include/autoconf.mk
$(MAKE) -C $(dir $(subst $(obj),,$@))
-$(SUBDIRS):
+$(SUBDIRS): $(obj)include/autoconf.mk
$(MAKE) -C $@ all
-$(NAND_SPL): version
+$(NAND_SPL): $(VERSION_FILE) $(obj)include/autoconf.mk
$(MAKE) -C nand_spl/board/$(BOARDDIR) all
-$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin
+$(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin $(obj)include/autoconf.mk
cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
-version:
- @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
- echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
+$(VERSION_FILE):
+ @( echo -n "#define U_BOOT_VERSION \"U-Boot " ; \
+ echo -n "$(U_BOOT_VERSION)" ; \
echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
- $(TOPDIR)) >> $(VERSION_FILE); \
- echo "\"" >> $(VERSION_FILE)
+ $(TOPDIR)) ; \
+ echo "\"" ) > $(VERSION_FILE)
gdbtools:
$(MAKE) -C tools/gdb all || exit 1
$(MAKE) -C tools/updater all || exit 1
env:
- $(MAKE) -C tools/env all || exit 1
+ $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1
-depend dep: version
+depend dep: $(VERSION_FILE)
for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
+TAG_SUBDIRS += include
+TAG_SUBDIRS += lib_generic board/$(BOARDDIR)
+TAG_SUBDIRS += cpu/$(CPU)
+TAG_SUBDIRS += lib_$(ARCH)
+TAG_SUBDIRS += fs/cramfs
+TAG_SUBDIRS += fs/fat
+TAG_SUBDIRS += fs/fdos
+TAG_SUBDIRS += fs/jffs2
+TAG_SUBDIRS += net
+TAG_SUBDIRS += disk
+TAG_SUBDIRS += common
+TAG_SUBDIRS += drivers/bios_emulator
+TAG_SUBDIRS += drivers/block
+TAG_SUBDIRS += drivers/hwmon
+TAG_SUBDIRS += drivers/i2c
+TAG_SUBDIRS += drivers/input
+TAG_SUBDIRS += drivers/misc
+TAG_SUBDIRS += drivers/mtd
+TAG_SUBDIRS += drivers/mtd/nand
+TAG_SUBDIRS += drivers/mtd/nand_legacy
+TAG_SUBDIRS += drivers/mtd/onenand
+TAG_SUBDIRS += drivers/net
+TAG_SUBDIRS += drivers/net/sk98lin
+TAG_SUBDIRS += drivers/pci
+TAG_SUBDIRS += drivers/pcmcia
+TAG_SUBDIRS += drivers/qe
+TAG_SUBDIRS += drivers/rtc
+TAG_SUBDIRS += drivers/serial
+TAG_SUBDIRS += drivers/spi
+TAG_SUBDIRS += drivers/usb
+TAG_SUBDIRS += drivers/video
+
tags ctags:
- ctags -w -o $(OBJTREE)/ctags `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk common drivers/bios_emulator \
- drivers/block drivers/hwmon drivers/i2c \
- drivers/input drivers/misc drivers/mtd \
- drivers/mtd/nand drivers/mtd/nand_legacy \
- drivers/mtd/onenand drivers/net drivers/net/sk98lin \
- drivers/pci drivers/pcmcia drivers/qe drivers/rtc \
- drivers/serial drivers/usb drivers/video \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+ ctags -w -o $(obj)ctags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+ -name '*.[ch]' -print`
etags:
- etags -a -o $(OBJTREE)/etags `find $(SUBDIRS) include \
- lib_generic board/$(BOARDDIR) cpu/$(CPU) lib_$(ARCH) \
- fs/cramfs fs/fat fs/fdos fs/jffs2 \
- net disk common drivers/bios_emulator \
- drivers/block drivers/hwmon drivers/i2c \
- drivers/input drivers/misc drivers/mtd \
- drivers/mtd/nand drivers/mtd/nand_legacy \
- drivers/mtd/onenand drivers/net drivers/net/sk98lin \
- drivers/pci drivers/pcmcia drivers/qe drivers/rtc \
- drivers/serial drivers/usb drivers/video \
- \( -name CVS -prune \) -o \( -name '*.[ch]' -print \)`
+ etags -a -o $(obj)etags `find $(SUBDIRS) $(TAG_SUBDIRS) \
+ -name '*.[ch]' -print`
$(obj)System.map: $(obj)u-boot
@$(NM) $< | \
# This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
# the dep file is only include in this top level makefile to determine when
# to regenerate the autoconf.mk file.
-$(OBJTREE)/include/autoconf.mk: $(obj)include/config.h
- @echo Generating include/autoconf.mk
- @# Generate the dependancies
- @$(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep
- @# Extract the config macros
- @$(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed >> $@
+$(obj)include/autoconf.mk: $(obj)include/config.h $(VERSION_FILE)
+ @$(XECHO) Generating include/autoconf.mk ; \
+ : Generate the dependancies ; \
+ $(CC) -M $(HOST_CFLAGS) $(CPPFLAGS) -MQ $@ include/common.h > $@.dep ; \
+ : Extract the config macros ; \
+ $(CPP) $(CFLAGS) -dM include/common.h | sed -n -f tools/scripts/define2mk.sed > $@
-sinclude $(OBJTREE)/include/autoconf.mk.dep
+sinclude $(obj)include/autoconf.mk.dep
#########################################################################
-else
+else # !config.mk
all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \
$(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \
-$(SUBDIRS) version gdbtools updater env depend \
+$(SUBDIRS) $(VERSION_FILE) gdbtools updater env depend \
dep tags ctags etags $(obj)System.map:
@echo "System not configured - see README" >&2
@ exit 1
-endif
+endif # config.mk
.PHONY : CHANGELOG
CHANGELOG:
then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
fi ; \
- echo "... with LOWBOOT configuration" ; \
+ $(XECHO) "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
echo "... with 8 MB flash only" ; \
- echo "... with LOWBOOT configuration" ; \
+ $(XECHO) "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
- echo "... DDR memory revision" ; \
+ $(XECHO) "... DDR memory revision" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
- echo "... with MPC5200 processor" ; \
+ $(XECHO) "... with MPC5200 processor" ; \
}
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
- echo "... with MGT5100 processor" ; \
+ $(XECHO) "... with MGT5100 processor" ; \
}
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
@mkdir -p $(obj)board/icecube
@ >$(obj)include/config.h
@ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
- @ echo "... DDR memory revision"
+ @ $(XECHO) "... DDR memory revision"
@ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h
@ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h
@[ -z "$(findstring _PM_,$@)" ] || \
{ echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h ; \
- echo "... with power management (low-power mode) support" ; \
+ $(XECHO) "... with power management (low-power mode) support" ; \
}
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
- echo "... with LOWBOOT configuration" ; \
+ $(XECHO) "... with LOWBOOT configuration" ; \
}
- @ echo "... with MPC5200B processor"
+ @ $(XECHO) "... with MPC5200B processor"
@$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
mcc200_config \
@mkdir -p $(obj)board/mcc200
@ >$(obj)include/config.h
@[ -n "$(findstring highboot,$@)" ] || \
- { echo "... with lowboot configuration" ; \
+ { $(XECHO) "... with lowboot configuration" ; \
}
@[ -z "$(findstring highboot,$@)" ] || \
{ echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp ; \
- echo "... with highboot configuration" ; \
+ $(XECHO) "... with highboot configuration" ; \
}
@[ -n "$(findstring _SDRAM,$@)" ] || \
{ if [ -n "$(findstring mcc200,$@)" ]; \
then \
- echo "... with DDR" ; \
+ $(XECHO) "... with DDR" ; \
else \
if [ -n "$(findstring _DDR,$@)" ];\
then \
- echo "... with DDR" ; \
+ $(XECHO) "... with DDR" ; \
else \
echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\
- echo "... with SDRAM" ; \
+ $(XECHO) "... with SDRAM" ; \
fi; \
fi; \
}
@[ -z "$(findstring _SDRAM,$@)" ] || \
{ echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ; \
- echo "... with SDRAM" ; \
+ $(XECHO) "... with SDRAM" ; \
}
@[ -z "$(findstring COM12,$@)" ] || \
{ echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h ; \
- echo "... with console on COM12" ; \
+ $(XECHO) "... with console on COM12" ; \
}
@[ -z "$(findstring prs200,$@)" ] || \
{ echo "#define CONFIG_PRS200" >>$(obj)include/config.h ;\
@$(MKCONFIG) -n $@ -a mcc200 ppc mpc5xxx mcc200
mecp5200_config: unconfig
- @$(MKCONFIG) -a mecp5200 ppc mpc5xxx mecp5200 esd
+ @$(MKCONFIG) mecp5200 ppc mpc5xxx mecp5200 esd
+
+munices_config: unconfig
+ @$(MKCONFIG) munices ppc mpc5xxx munices
o2dnt_config:
@$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt
@ >$(obj)include/config.h
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h ; \
- echo "... DDR memory revision" ; \
+ $(XECHO) "... DDR memory revision" ; \
}
@[ -z "$(findstring ROMBOOT,$@)" ] || \
{ echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
- echo "... booting from 8-bit flash" ; \
+ $(XECHO) "... booting from 8-bit flash" ; \
}
@$(MKCONFIG) -a PM520 ppc mpc5xxx pm520
@mkdir -p $(obj)include
@[ -z "$(findstring _B,$@)" ] || \
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- echo "... with MPC5200B processor" ; \
+ $(XECHO) "... with MPC5200B processor" ; \
}
@$(MKCONFIG) -n $@ -a TB5200 ppc mpc5xxx tqm5200
@ >$(obj)include/config.h
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>$(obj)include/config.h ; \
- echo "... with MGT5100 processor" ; \
+ $(XECHO) "... with MGT5100 processor" ; \
}
@[ -z "$(findstring 5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>$(obj)include/config.h ; \
- echo "... with MPC5200 processor" ; \
+ $(XECHO) "... with MPC5200 processor" ; \
}
@[ -n "$(findstring Rev,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h ; \
- echo "... revision 1 board" ; \
+ $(XECHO) "... revision 1 board" ; \
}
@[ -z "$(findstring Rev2_,$@)" ] || \
{ echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h ; \
- echo "... revision 2 board" ; \
+ $(XECHO) "... revision 2 board" ; \
}
@[ -z "$(findstring lowboot_,$@)" ] || \
{ echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp ; \
- echo "... with lowboot configuration" ; \
+ $(XECHO) "... with lowboot configuration" ; \
}
@$(MKCONFIG) -a Total5200 ppc mpc5xxx total5200
{ echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
- echo "... TQM5200S on Cam5200" ; \
+ $(XECHO) "... TQM5200S on Cam5200" ; \
}
@[ -z "$(findstring niosflash,$@)" ] || \
{ echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h ; \
- echo "... with NIOS flash driver" ; \
+ $(XECHO) "... with NIOS flash driver" ; \
}
@[ -z "$(findstring fo300,$@)" ] || \
{ echo "#define CONFIG_FO300" >>$(obj)include/config.h ; \
- echo "... TQM5200 on FO300" ; \
+ $(XECHO) "... TQM5200 on FO300" ; \
}
@[ -z "$(findstring MiniFAP,$@)" ] || \
{ echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h ; \
- echo "... TQM5200_AC on MiniFAP" ; \
+ $(XECHO) "... TQM5200_AC on MiniFAP" ; \
}
@[ -z "$(findstring STK100,$@)" ] || \
{ echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h ; \
- echo "... on a STK52XX.100 base board" ; \
+ $(XECHO) "... on a STK52XX.100 base board" ; \
}
@[ -z "$(findstring TQM5200_B,$@)" ] || \
{ echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
@ >$(obj)include/config.h
@[ -z "$(findstring _SC,$@)" ] || \
{ echo "#define CONFIG_SC" >>$(obj)include/config.h ; \
- echo "With reduced H/W feature set (SC)..." ; \
+ $(XECHO) "With reduced H/W feature set (SC)..." ; \
}
@$(MKCONFIG) -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
@ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CONFIG_100MHz" >>$(obj)include/config.h ; \
- echo "... with 100MHz system clock" ; \
+ $(XECHO) "... with 100MHz system clock" ; \
}
@$(MKCONFIG) -a $(call xtract_ICU862,$@) ppc mpc8xx icu862
MBX860T_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mbx8xx
+mgsuvd_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc8xx mgsuvd
+
MHPC_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc8xx mhpc eltec
@ >$(obj)include/config.h
@[ -z "$(findstring NETVIA_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h ; \
- echo "... Version 1" ; \
+ $(XECHO) "... Version 1" ; \
}
@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
{ echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h ; \
- echo "... Version 2" ; \
+ $(XECHO) "... Version 2" ; \
}
@$(MKCONFIG) -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
@ >$(obj)include/config.h
@[ -z "$(findstring _64,$@)" ] || \
{ echo "#define RPXlite_64MHz" >>$(obj)include/config.h ; \
- echo "... with 64MHz system clock ..."; \
+ $(XECHO) "... with 64MHz system clock ..."; \
}
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
- echo "... with LCD display ..."; \
+ $(XECHO) "... with LCD display ..."; \
}
@[ -z "$(findstring _NVRAM,$@)" ] || \
{ echo "#define CFG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h ; \
- echo "... with ENV in NVRAM ..."; \
+ $(XECHO) "... with ENV in NVRAM ..."; \
}
@$(MKCONFIG) -a RPXlite_DW ppc mpc8xx RPXlite_dw
TQM862M_config \
TQM866M_config \
TQM885D_config \
+TK885D_config \
virtlab2_config: unconfig
@mkdir -p $(obj)include
@ >$(obj)include/config.h
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \
- echo "... with LCD display" ; \
+ $(XECHO) "... with LCD display" ; \
}
@$(MKCONFIG) -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
@ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h
@[ -z "$(findstring _25,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h ; \
- echo "SysClk = 25MHz" ; \
+ $(XECHO) "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h ; \
- echo "SysClk = 33MHz" ; \
+ $(XECHO) "SysClk = 33MHz" ; \
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci405 esd
@echo "BOARD_REVISION = $(@:_config=)" >> $(obj)include/config.mk
-CPCI440_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc ppc4xx cpci440 esd
-
CPCIISER4_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx cpciiser4 esd
DU405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx du405 esd
+DU440_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx du440 esd
+
ebony_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx ebony amcc
@$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
hcu4_config: unconfig
+ @mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
hcu5_config: unconfig
+ @mkdir -p $(obj)board/netstal/common
@$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
HH405_config: unconfig
katmai_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx katmai amcc
+# Kilauea & Haleakala images are identical (recognized via PVR)
+kilauea_config \
+haleakala_config: unconfig
+ @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+
+kilauea_nand_config \
+haleakala_nand_config: unconfig
+ @mkdir -p $(obj)include $(obj)board/amcc/kilauea
+ @mkdir -p $(obj)nand_spl/board/amcc/kilauea
+ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+ @$(MKCONFIG) -n $@ -a kilauea ppc ppc4xx kilauea amcc
+ @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
+korat_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx korat
+
luan_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
lwmon5_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+makalu_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx makalu amcc
+
METROBOX_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
MIP405T_config: unconfig
@mkdir -p $(obj)include
@echo "#define CONFIG_MIP405T" >$(obj)include/config.h
- @echo "Enable subset config for MIP405T"
+ @$(XECHO) "Enable subset config for MIP405T"
@$(MKCONFIG) -a MIP405 ppc ppc4xx mip405 mpl
ML2_config: unconfig
PMC405_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc405 esd
+PMC440_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc ppc4xx pmc440 esd
+
PPChameleonEVB_config \
PPChameleonEVB_BA_25_config \
PPChameleonEVB_ME_25_config \
@ >$(obj)include/config.h
@[ -z "$(findstring EVB_BA,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h ; \
- echo "... BASIC model" ; \
+ $(XECHO) "... BASIC model" ; \
}
@[ -z "$(findstring EVB_ME,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h ; \
- echo "... MEDIUM model" ; \
+ $(XECHO) "... MEDIUM model" ; \
}
@[ -z "$(findstring EVB_HI,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h ; \
- echo "... HIGH-END model" ; \
+ $(XECHO) "... HIGH-END model" ; \
}
@[ -z "$(findstring _25,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h ; \
- echo "SysClk = 25MHz" ; \
+ $(XECHO) "SysClk = 25MHz" ; \
}
@[ -z "$(findstring _33,$@)" ] || \
{ echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h ; \
- echo "SysClk = 33MHz" ; \
+ $(XECHO) "SysClk = 33MHz" ; \
}
@$(MKCONFIG) -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- echo "... booting from 8-bit flash" ; \
+ $(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- echo "... booting from 64-bit flash" ; \
+ $(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- echo "... booting from 8-bit flash" ; \
+ $(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- echo "... booting from 64-bit flash" ; \
+ $(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
@cd $(obj)include ; \
if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "CONFIG_BOOT_ROM = y" >> config.mk ; \
- echo "... booting from 8-bit flash" ; \
+ $(XECHO) "... booting from 8-bit flash" ; \
else \
echo "CONFIG_BOOT_ROM = n" >> config.mk ; \
- echo "... booting from 64-bit flash" ; \
+ $(XECHO) "... booting from 64-bit flash" ; \
fi; \
echo "export CONFIG_BOOT_ROM" >> config.mk;
fi
@$(MKCONFIG) -a ISPAN ppc mpc8260 ispan
+mgcoge_config : unconfig
+ @$(MKCONFIG) mgcoge ppc mpc8260 mgcoge
+
MPC8260ADS_config \
MPC8260ADS_lowboot_config \
MPC8260ADS_33MHz_config \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
{ echo "TEXT_BASE = 0xFF800000" >$(obj)board/mpc8260ads/config.tmp ; \
- echo "... with lowboot configuration" ; \
+ $(XECHO) "... with lowboot configuration" ; \
}
@$(MKCONFIG) -a MPC8260ADS ppc mpc8260 mpc8260ads
>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "... booting from 8-bit flash" ; \
+ $(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
- echo "... with 32 MB Flash" ; \
+ $(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
else \
- echo "... booting from 64-bit flash" ; \
+ $(XECHO) "... booting from 64-bit flash" ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
- echo "... with 32 MB Flash" ; \
+ $(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
else \
@mkdir -p $(obj)board/pm826
@if [ "$(findstring _PCI_,$@)" ] ; then \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
- echo "... with PCI enabled" ; \
+ $(XECHO) "... with PCI enabled" ; \
else \
>$(obj)include/config.h ; \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
- echo "... booting from 8-bit flash" ; \
+ $(XECHO) "... booting from 8-bit flash" ; \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
fi; \
echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \
echo "... with $${CFREQ}MHz system clock" ; \
- if [ "$${CACHE}" == "yes" ] ; then \
+ if [ "$${CACHE}" = "yes" ] ; then \
echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
- echo "... with L2 Cache support" ; \
+ $(XECHO) "... with L2 Cache support" ; \
else \
echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \
- echo "... without L2 Cache support" ; \
+ $(XECHO) "... without L2 Cache support" ; \
fi; \
- if [ "$${BMODE}" == "60x" ] ; then \
+ if [ "$${BMODE}" = "60x" ] ; then \
echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
- echo "... with 60x Bus Mode" ; \
+ $(XECHO) "... with 60x Bus Mode" ; \
else \
echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \
- echo "... without 60x Bus Mode" ; \
+ $(XECHO) "... without 60x Bus Mode" ; \
fi
@$(MKCONFIG) -a TQM8260 ppc mpc8260 tqm8260
## Coldfire
#########################################################################
+M52277EVB_config: unconfig
+ @$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
+
M5235EVB_config \
M5235EVB_Flash16_config \
M5235EVB_Flash32_config: unconfig
M5235EVB_Flash16_config) FLASH=16;; \
M5235EVB_Flash32_config) FLASH=32;; \
esac; \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
if [ "$${FLASH}" != "16" ] ; then \
- echo "#define NORFLASH_PS32BIT 1" >> include/config.h ; \
+ echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
else \
M5329AFEE_config) NAND=0;; \
M5329BFEE_config) NAND=16;; \
esac; \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
if [ "$${NAND}" != "0" ] ; then \
echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
fi
@$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
+M5373EVB_config : unconfig
+ @case "$@" in \
+ M5373EVB_config) NAND=16;; \
+ esac; \
+ >include/config.h ; \
+ if [ "$${NAND}" != "0" ] ; then \
+ echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale
+
M54455EVB_config \
M54455EVB_atmel_config \
M54455EVB_intel_config \
M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \
M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \
esac; \
- >include/config.h ; \
- if [ "$${FLASH}" == "INTEL" ] ; then \
+ >$(obj)include/config.h ; \
+ if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
- echo "... with INTEL boot..." ; \
+ $(XECHO) "... with INTEL boot..." ; \
else \
echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
- echo "... with ATMEL boot..." ; \
+ $(XECHO) "... with ATMEL boot..." ; \
fi; \
echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
- echo "... with $${FREQ}Hz input clock"
+ $(XECHO) "... with $${FREQ}Hz input clock"
@$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+M5475AFE_config \
+M5475BFE_config \
+M5475CFE_config \
+M5475DFE_config \
+M5475EFE_config \
+M5475FFE_config \
+M5475GFE_config : unconfig
+ @case "$@" in \
+ M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+ M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+ M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ esac; \
+ >include/config.h ; \
+ echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \
+ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ if [ "$${RAM1}" != "0" ] ; then \
+ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${CODE}" != "0" ] ; then \
+ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${VID}" == "1" ] ; then \
+ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${USB}" == "1" ] ; then \
+ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale
+
+M5485AFE_config \
+M5485BFE_config \
+M5485CFE_config \
+M5485DFE_config \
+M5485EFE_config \
+M5485FFE_config \
+M5485GFE_config \
+M5485HFE_config : unconfig
+ @case "$@" in \
+ M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \
+ M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \
+ M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \
+ M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \
+ M5485HFE_config) BOOT=2;CODE=;VID=1;USB=0;RAM=64;RAM1=0;; \
+ esac; \
+ >include/config.h ; \
+ echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \
+ echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \
+ echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \
+ if [ "$${RAM1}" != "0" ] ; then \
+ echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${CODE}" != "0" ] ; then \
+ echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${VID}" == "1" ] ; then \
+ echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \
+ fi; \
+ if [ "$${USB}" == "1" ] ; then \
+ echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \
+ fi
+ @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale
+
#########################################################################
## MPC83xx Systems
#########################################################################
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "...33M ..." ; \
+ $(XECHO) -n "...33M ..." ; \
echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo -n "...66M..." ; \
+ $(XECHO) -n "...66M..." ; \
echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+MPC8315ERDB_config: unconfig
+ @$(MKCONFIG) -a MPC8315ERDB ppc mpc83xx mpc8315erdb freescale
+
MPC8323ERDB_config: unconfig
@$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
- echo -n "... PCI HOST " ; \
+ $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
- echo "...PCI SLAVE 66M" ; \
+ $(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "...33M ..." ; \
+ $(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo -n "...66M..." ; \
+ $(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
- echo -n "...ATM..." ; \
+ $(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
- echo -n "... PCI HOST " ; \
+ $(XECHO) -n "... PCI HOST " ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
- echo "...PCI SLAVE 66M" ; \
+ $(XECHO) "...PCI SLAVE 66M" ; \
echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "...33M ..." ; \
+ $(XECHO) -n "...33M ..." ; \
echo "#define PCI_33M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo -n "...66M..." ; \
+ $(XECHO) -n "...66M..." ; \
echo "#define PCI_66M" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _ATM_,$@)" ] ; then \
- echo -n "...ATM..." ; \
+ $(XECHO) -n "...ATM..." ; \
echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
+MPC8360ERDK_33_config \
+MPC8360ERDK_66_config \
+MPC8360ERDK_config:
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _33_,$@)" ] ; then \
+ $(XECHO) -n "... CLKIN 33MHz " ; \
+ echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\
+ fi ;
+ @$(MKCONFIG) -a MPC8360ERDK ppc mpc83xx mpc8360erdk freescale
+
+MPC837XEMDS_config \
+MPC837XEMDS_HOST_config: unconfig
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
+ if [ "$(findstring _HOST_,$@)" ] ; then \
+ $(XECHO) -n "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ fi ;
+ @$(MKCONFIG) -a MPC837XEMDS ppc mpc83xx mpc837xemds freescale
+
+MPC837XERDB_config: unconfig
+ @$(MKCONFIG) -a MPC837XERDB ppc mpc83xx mpc837xerdb freescale
+
sbc8349_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
## MPC85xx Systems
#########################################################################
+ATUM8548_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx atum8548
+
MPC8540ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8540ads freescale
MPC8540EVAL_config \
MPC8540EVAL_33_config \
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo "... 33 MHz PCI" ; \
+ $(XECHO) "... 33 MHz PCI" ; \
else \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
- echo "... 66 MHz PCI" ; \
+ $(XECHO) "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
- echo " slave" ; \
+ $(XECHO) " slave" ; \
else \
- echo " host" ; \
+ $(XECHO) " host" ; \
fi
@$(MKCONFIG) -a MPC8540EVAL ppc mpc85xx mpc8540eval
MPC8560ADS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads freescale
MPC8541CDS_legacy_config \
MPC8541CDS_config: unconfig
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- echo "... legacy" ; \
+ $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
+ @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds freescale
MPC8544DS_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- echo "... legacy" ; \
+ $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
+ @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds freescale
MPC8555CDS_legacy_config \
MPC8555CDS_config: unconfig
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _legacy_,$@)" ] ; then \
echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
- echo "... legacy" ; \
+ $(XECHO) "... legacy" ; \
fi
- @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
+ @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds freescale
MPC8568MDS_config: unconfig
- @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
PM854_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
@mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
- echo "... 66 MHz PCI" ; \
+ $(XECHO) "... 66 MHz PCI" ; \
else \
>$(obj)include/config.h ; \
- echo "... 33 MHz PCI" ; \
+ $(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a SBC8540 ppc mpc85xx sbc8560
+sbc8548_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc85xx sbc8548
+
sbc8560_config \
sbc8560_33_config \
sbc8560_66_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _66_,$@)" ] ; then \
echo "#define CONFIG_PCI_66" >>$(obj)include/config.h ; \
- echo "... 66 MHz PCI" ; \
+ $(XECHO) "... 66 MHz PCI" ; \
else \
>$(obj)include/config.h ; \
- echo "... 33 MHz PCI" ; \
+ $(XECHO) "... 33 MHz PCI" ; \
fi
@$(MKCONFIG) -a sbc8560 ppc mpc85xx sbc8560
@mkdir -p $(obj)include
@if [ "$(findstring _4M_,$@)" ] ; then \
echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
- echo "... with 4 MiB flash memory" ; \
+ $(XECHO) "... with 4 MiB flash memory" ; \
else \
>$(obj)include/config.h ; \
fi
@mkdir -p $(obj)include
@CTYPE=$(subst TQM,,$(@:_config=)); \
>$(obj)include/config.h ; \
- echo "... TQM"$${CTYPE}; \
+ $(XECHO) "... TQM"$${CTYPE}; \
echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
## MPC86xx Systems
#########################################################################
+MPC8610HPCD_config: unconfig
+ @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8610hpcd freescale
+
MPC8641HPCN_config: unconfig
@$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
netstar_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _32_,$@)" ] ; then \
- echo "... 32MB SDRAM" ; \
+ $(XECHO) "... 32MB SDRAM" ; \
echo "#define PHYS_SDRAM_1_SIZE SZ_32M" >>$(obj)include/config.h ; \
else \
- echo "... 64MB SDRAM" ; \
+ $(XECHO) "... 64MB SDRAM" ; \
echo "#define PHYS_SDRAM_1_SIZE SZ_64M" >>$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a netstar arm arm925t netstar
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
- echo "... configured for CS0 boot"; \
+ $(XECHO) "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
- echo "... configured for CS_AUTO boot"; \
+ $(XECHO) "... configured for CS_AUTO boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- echo "... configured for CS3 boot"; \
+ $(XECHO) "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \
- echo "... configured for CS0 boot"; \
+ $(XECHO) "... configured for CS0 boot"; \
else \
echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
- echo "... configured for CS3 boot"; \
+ $(XECHO) "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap
@[ -z "$(findstring _bigram,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \
- echo "... with 8 MB Flash, 32 MB RAM" ; \
+ $(XECHO) "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- echo "... with 16 MB Flash, 16 MB RAM" ; \
+ $(XECHO) "... with 16 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- echo "... with 8 MB Flash, 16 MB RAM" ; \
+ $(XECHO) "... with 8 MB Flash, 16 MB RAM" ; \
echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@$(MKCONFIG) -a $(call xtract_trab,$@) arm arm920t trab NULL s3c24x0
@mkdir -p $(obj)include
@mkdir -p $(obj)board/voiceblue
@if [ "$(findstring _smallflash_,$@)" ] ; then \
- echo "... boot from lower flash bank" ; \
+ $(XECHO) "... boot from lower flash bank" ; \
echo "#define VOICEBLUE_SMALL_FLASH" >>$(obj)include/config.h ; \
echo "VOICEBLUE_SMALL_FLASH=y" >$(obj)board/voiceblue/config.tmp ; \
else \
- echo "... boot from upper flash bank" ; \
+ $(XECHO) "... boot from upper flash bank" ; \
>$(obj)include/config.h ; \
echo "VOICEBLUE_SMALL_FLASH=n" >$(obj)board/voiceblue/config.tmp ; \
fi
## XScale Systems
#########################################################################
+actux1_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm ixp actux1
+
+actux2_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm ixp actux2
+
+actux3_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm ixp actux3
+
+actux4_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm ixp actux4
+
adsvix_config : unconfig
@$(MKCONFIG) $(@:_config=) arm pxa adsvix
@mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
- echo "... on SCPU board variant" ; \
+ $(XECHO) "... on SCPU board variant" ; \
else \
>$(obj)include/config.h ; \
fi
#########################################################################
## ARM1136 Systems
#########################################################################
-omap2420h4_config : unconfig
+omap2420h4_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4
+apollon_config : unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm1136 apollon
+
#========================================================================
# i386
#========================================================================
@ >$(obj)include/config.h
@[ -z "$(findstring _100MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h ; \
- echo "... with 100MHz system clock" ; \
+ $(XECHO) "... with 100MHz system clock" ; \
}
@[ -z "$(findstring _133MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h ; \
- echo "... with 133MHz system clock" ; \
+ $(XECHO) "... with 133MHz system clock" ; \
}
@[ -z "$(findstring _150MHz,$@)" ] || \
{ echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h ; \
- echo "... with 150MHz system clock" ; \
+ $(XECHO) "... with 150MHz system clock" ; \
}
@$(MKCONFIG) -a $(call xtract_incaip,$@) mips mips incaip
@echo "#define CONFIG_PB1000 1" >>$(obj)include/config.h
@$(MKCONFIG) -a pb1x00 mips mips pb1x00
+qemu_mips_config: unconfig
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_QEMU_MIPS 1" >>$(obj)include/config.h
+ @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
+
#########################################################################
## MIPS64 5Kc
#########################################################################
@ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'safe_32' configuration" ; \
+ $(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'standard_32' configuration" ; \
+ $(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring DK1C20_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
@ >$(obj)include/config.h
@[ -z "$(findstring _safe_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'safe_32' configuration" ; \
+ $(XECHO) "... NIOS 'safe_32' configuration" ; \
}
@[ -z "$(findstring _standard_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'standard_32' configuration" ; \
+ $(XECHO) "... NIOS 'standard_32' configuration" ; \
}
@[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
{ echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'mtx_ldk_20' configuration" ; \
+ $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
}
@[ -z "$(findstring DK1S10_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
@ >$(obj)include/config.h
@[ -z "$(findstring _DNPEVA2,$@)" ] || \
{ echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
- echo "... DNP/EVA2 configuration" ; \
+ $(XECHO) "... DNP/EVA2 configuration" ; \
}
@[ -z "$(findstring _base_32,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'base_32' configuration" ; \
+ $(XECHO) "... NIOS 'base_32' configuration" ; \
}
@[ -z "$(findstring ADNPESC1_config,$@)" ] || \
{ echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- echo "... NIOS 'base_32' configuration (DEFAULT)" ; \
+ $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
}
@$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
#########################################################################
atstk1002_config : unconfig
- @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1003_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atstk1004_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap700x
+
+atngw100_config : unconfig
+ @$(MKCONFIG) $(@:_config=) avr32 at32ap atngw100 atmel at32ap700x
+
+#########################################################################
+#########################################################################
+#########################################################################
+
+#########################################################################
+## sh3 (Renesas SuperH)
+#########################################################################
+ms7720se_config: unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_MS7720SE 1" >> include/config.h
+ @./mkconfig -a $(@:_config=) sh sh3 ms7720se
+
+#########################################################################
+## sh4 (Renesas SuperH)
+#########################################################################
+ms7750se_config: unconfig
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_MS7750SE 1" >> $(obj)include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 ms7750se
+
+ms7722se_config : unconfig
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_MS7722SE 1" >> $(obj)include/config.h
+ @./mkconfig -a $(@:_config=) sh sh4 ms7722se
#########################################################################
#########################################################################
#########################################################################
clean:
- find $(OBJTREE) -type f \
+ @find $(OBJTREE) -type f \
\( -name 'core' -o -name '*.bak' -o -name '*~' \
-o -name '*.o' -o -name '*.a' \) -print \
| xargs rm -f
- rm -f $(obj)examples/hello_world $(obj)examples/timer \
+ @rm -f $(obj)examples/hello_world $(obj)examples/timer \
$(obj)examples/eepro100_eeprom $(obj)examples/sched \
$(obj)examples/mem_to_mem_idma2intr $(obj)examples/82559_eeprom \
$(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
$(obj)examples/test_burst
- rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
+ @rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
$(obj)tools/gen_eth_addr $(obj)tools/ubsha1
- rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
- rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
- rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
- rm -f $(obj)tools/env/fw_printenv $(obj)tools/env/fw_setenv
- rm -f $(obj)board/cray/L1/bootscript.c $(obj)board/cray/L1/bootscript.image
- rm -f $(obj)board/netstar/eeprom $(obj)board/netstar/crcek $(obj)board/netstar/crcit
- rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
- rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
- rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
- rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds
- rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds
- rm -f $(obj)include/bmp_logo.h
- rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map
+ @rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
+ @rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
+ @rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
+ @rm -f $(obj)tools/env/fw_printenv $(obj)tools/env/fw_setenv
+ @rm -f $(obj)board/cray/L1/bootscript.c $(obj)board/cray/L1/bootscript.image
+ @rm -f $(obj)board/netstar/eeprom $(obj)board/netstar/crcek $(obj)board/netstar/crcit
+ @rm -f $(obj)board/netstar/*.srec $(obj)board/netstar/*.bin
+ @rm -f $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom
+ @rm -f $(obj)board/integratorap/u-boot.lds $(obj)board/integratorcp/u-boot.lds
+ @rm -f $(obj)board/bf533-ezkit/u-boot.lds $(obj)board/bf533-stamp/u-boot.lds
+ @rm -f $(obj)board/bf537-stamp/u-boot.lds $(obj)board/bf561-ezkit/u-boot.lds
+ @rm -f $(obj)include/bmp_logo.h
+ @rm -f $(obj)nand_spl/u-boot-spl $(obj)nand_spl/u-boot-spl.map
+ @rm -f $(obj)api_examples/demo $(VERSION_FILE)
clobber: clean
- find $(OBJTREE) -type f \( -name .depend \
+ @find $(OBJTREE) -type f \( -name .depend \
-o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \
-print0 \
| xargs -0 rm -f
- rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
- rm -fr $(obj)*.*~
- rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
- rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c
- rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
- rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
- [ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
+ @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS
+ @rm -fr $(obj)*.*~
+ @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
+ @rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c
+ @rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
+ @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
+ @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f
+ @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -lname "*" -print | xargs rm -f
ifeq ($(OBJTREE),$(SRCTREE))
mrproper \
else
mrproper \
distclean: clobber unconfig
- rm -rf $(OBJTREE)/*
+ rm -rf $(obj)*
endif
backup:
projects / karo-tx-uboot.git / blobdiff