ARM: UniPhier: disable autostart by default

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index 2e03e1307ca4b9f3f0594c2651a03abc6015f076..b4ed77595f0f59b4749df30850a90453a08d6629 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
-VERSION = 2014
-PATCHLEVEL = 10
+VERSION = 2015
+PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc2
 NAME =
 
 # *DOCUMENTATION*
@@ -610,9 +610,6 @@ HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makef
 libs-y += lib/
 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 libs-y += $(CPUDIR)/
-ifdef SOC
-libs-y += $(CPUDIR)/$(SOC)/
-endif
 libs-$(CONFIG_OF_EMBED) += dts/
 libs-y += arch/$(ARCH)/lib/
 libs-y += fs/
@@ -749,6 +746,9 @@ ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 endif
 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
 
+# We can't do this yet due to the need for binary blobs
+# ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
+
 # enable combined SPL/u-boot/dtb rules for tegra
 ifneq ($(CONFIG_TEGRA),)
 ifeq ($(CONFIG_SPL),y)
@@ -817,7 +817,8 @@ OBJCOPYFLAGS_u-boot.srec := -O srec
 u-boot.hex u-boot.srec: u-boot FORCE
        $(call if_changed,objcopy)
 
-OBJCOPYFLAGS_u-boot.bin := -O binary
+OBJCOPYFLAGS_u-boot.bin := -O binary \
+               $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
 
 binary_size_check: u-boot.bin FORCE
        @file_size=$(shell wc -c u-boot.bin | awk '{print $$1}') ; \
@@ -956,6 +957,39 @@ u-boot-nand.gph: u-boot.bin FORCE
        $(call if_changed,mkimage)
        @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
 
+# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
+# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
+# the middle.
+ifneq ($(CONFIG_X86_RESET_VECTOR),)
+rom: u-boot.rom FORCE
+
+u-boot.rom: u-boot-x86-16bit.bin u-boot-dtb.bin \
+               $(srctree)/board/$(BOARDDIR)/mrc.bin
+       $(objtree)/tools/ifdtool -c -r $(CONFIG_ROM_SIZE) u-boot.tmp
+       if [ -n "$(CONFIG_HAVE_INTEL_ME)" ]; then \
+               $(objtree)/tools/ifdtool -D \
+                       $(srctree)/board/$(BOARDDIR)/descriptor.bin u-boot.tmp; \
+               $(objtree)/tools/ifdtool \
+                       -i ME:$(srctree)/board/$(BOARDDIR)/me.bin u-boot.tmp; \
+       fi
+       $(objtree)/tools/ifdtool -w \
+               $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-dtb.bin u-boot.tmp
+       $(objtree)/tools/ifdtool -w \
+               $(CONFIG_X86_MRC_START):$(srctree)/board/$(BOARDDIR)/mrc.bin \
+               u-boot.tmp
+       $(objtree)/tools/ifdtool -w \
+               $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin \
+               u-boot.tmp
+       $(objtree)/tools/ifdtool -w \
+               $(CONFIG_X86_OPTION_ROM_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_X86_OPTION_ROM_FILENAME) \
+               u-boot.tmp
+       mv u-boot.tmp $@
+
+OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
+u-boot-x86-16bit.bin: u-boot FORCE
+       $(call if_changed,objcopy)
+endif
+
 ifneq ($(CONFIG_SUNXI),)
 OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
                                   --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff