/*
* armboot - Startup Code for ARM720 CPU-core
*
- * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
- * Copyright (c) 2002 Alex Z
üpke <azu@sysgo.de>
+ * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Z
üpke <azu@sysgo.de>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <asm-offsets.h>
ldr pc, _software_interrupt
ldr pc, _prefetch_abort
ldr pc, _data_abort
-#ifdef CONFIG_LPC2292
- .word 0xB4405F76 /* 2's complement of the checksum of the vectors */
-#else
ldr pc, _not_used
-#endif
ldr pc, _irq
ldr pc, _fiq
+#ifdef CONFIG_SPL_BUILD
+_undefined_instruction: .word _undefined_instruction
+_software_interrupt: .word _software_interrupt
+_prefetch_abort: .word _prefetch_abort
+_data_abort: .word _data_abort
+_not_used: .word _not_used
+_irq: .word _irq
+_fiq: .word _fiq
+_pad: .word 0x12345678 /* now 16*4=64 */
+#else
_undefined_instruction: .word undefined_instruction
_software_interrupt: .word software_interrupt
_prefetch_abort: .word prefetch_abort
_not_used: .word not_used
_irq: .word irq
_fiq: .word fiq
+_pad: .word 0x12345678 /* now 16*4=64 */
+#endif /* CONFIG_SPL_BUILD */
.balignl 16,0xdeadbeef
.globl _TEXT_BASE
_TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+ .word CONFIG_SPL_TEXT_BASE
+#else
.word CONFIG_SYS_TEXT_BASE
+#endif
/*
* These are defined in the board-specific linker script.
.globl _bss_end_ofs
_bss_end_ofs:
- .word __bss_end__ - _start
+ .word __bss_end - _start
.globl _end_ofs
_end_ofs:
bl cpu_init_crit
#endif
-#ifdef CONFIG_LPC2292
- bl lowlevel_init
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
- ldr sp, =(CONFIG_SYS_INIT_SP_ADDR)
- bic sp, sp, #7 /* 8-byte alignment for ABI compliance */
- ldr r0,=0x00000000
- bl board_init_f
+ bl _main
/*------------------------------------------------------------------------------*/
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
- .globl relocate_code
-relocate_code:
- mov r4, r0 /* save addr_sp */
- mov r5, r1 /* save addr of gd */
- mov r6, r2 /* save addr of destination */
-
- /* Set up the stack */
-stack_setup:
- mov sp, r4
-
- adr r0, _start
- cmp r0, r6
- beq clear_bss /* skip relocation */
- mov r1, r6 /* r1 <- scratch for copy_loop */
- ldr r3, _bss_start_ofs
- add r2, r0, r3 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r1!, {r9-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- blo copy_loop
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
-#ifndef CONFIG_SPL_BUILD
- /*
- * fix .rel.dyn relocations
- */
- ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r6, r0 /* r9 <- relocation offset */
- ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
- add r10, r10, r0 /* r10 <- sym table in FLASH */
- ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
- add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
- ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
- add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
-fixloop:
- ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
- add r0, r0, r9 /* r0 <- location to fix up in RAM */
- ldr r1, [r2, #4]
- and r7, r1, #0xff
- cmp r7, #23 /* relative fixup? */
- beq fixrel
- cmp r7, #2 /* absolute fixup? */
- beq fixabs
- /* ignore unknown type of fixup */
- b fixnext
-fixabs:
- /* absolute fix: set location to (offset) symbol value */
- mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
- add r1, r10, r1 /* r1 <- address of symbol in table */
- ldr r1, [r1, #4] /* r1 <- symbol value */
- add r1, r1, r9 /* r1 <- relocated sym addr */
- b fixnext
-fixrel:
- /* relative fix: increase location by offset */
- ldr r1, [r0]
- add r1, r1, r9
-fixnext:
- str r1, [r0]
- add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
- cmp r2, r3
- blo fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
- ldr r0, _bss_start_ofs
- ldr r1, _bss_end_ofs
- mov r4, r6 /* reloc addr */
- add r0, r0, r4
- add r1, r1, r4
- mov r2, #0x00000000 /* clear */
-
-clbss_l:str r2, [r0] /* clear loop... */
- add r0, r0, #4
- cmp r0, r1
- bne clbss_l
-
- bl coloured_LED_init
- bl red_LED_on
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- ldr r0, _board_init_r_ofs
- adr r1, _start
- add lr, r0, r1
- add lr, lr, r9
- /* setup parameters for board_init_r */
- mov r0, r5 /* gd_t */
- mov r1, r6 /* dest_addr */
- /* jump to it ... */
mov pc, lr
-_board_init_r_ofs:
- .word board_init_r - _start
-
-_rel_dyn_start_ofs:
- .word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
- .word __rel_dyn_end - _start
-_dynsym_start_ofs:
- .word __dynsym_start - _start
-
/*
*************************************************************************
*
*************************************************************************
*/
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
-
-/* Interrupt-Controller base addresses */
-INTMR1: .word 0x80000280 @ 32 bit size
-INTMR2: .word 0x80001280 @ 16 bit size
-INTMR3: .word 0x80002280 @ 8 bit size
-
-/* SYSCONs */
-SYSCON1: .word 0x80000100
-SYSCON2: .word 0x80001100
-SYSCON3: .word 0x80002200
-
-#define CLKCTL 0x6 /* mask */
-#define CLKCTL_18 0x0 /* 18.432 MHz */
-#define CLKCTL_36 0x2 /* 36.864 MHz */
-#define CLKCTL_49 0x4 /* 49.152 MHz */
-#define CLKCTL_73 0x6 /* 73.728 MHz */
-
-#elif defined(CONFIG_LPC2292)
-PLLCFG_ADR: .word PLLCFG
-PLLFEED_ADR: .word PLLFEED
-PLLCON_ADR: .word PLLCON
-PLLSTAT_ADR: .word PLLSTAT
-VPBDIV_ADR: .word VPBDIV
-MEMMAP_ADR: .word MEMMAP
-
-#endif
-
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
cpu_init_crit:
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
- /*
- * mask all IRQs by clearing all bits in the INTMRs
- */
- mov r1, #0x00
- ldr r0, INTMR1
- str r1, [r0]
- ldr r0, INTMR2
- str r1, [r0]
- ldr r0, INTMR3
- str r1, [r0]
-
- /*
- * flush v4 I/D caches
- */
- mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- mrc p15,0,r0,c1,c0
- bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
- bic r0, r0, #0x0000008f @ clear bits 7, 3:0 (B--- WCAM)
- orr r0, r0, #0x00000002 @ set bit 2 (A) Align
- mcr p15,0,r0,c1,c0
-#elif defined(CONFIG_NETARM)
- /*
- * prior to software reset : need to set pin PORTC4 to be *HRESET
- */
- ldr r0, =NETARM_GEN_MODULE_BASE
- ldr r1, =(NETARM_GEN_PORT_MODE(0x10) | \
- NETARM_GEN_PORT_DIR(0x10))
- str r1, [r0, #+NETARM_GEN_PORTC]
- /*
- * software reset : see HW Ref. Guide 8.2.4 : Software Service register
- * for an explanation of this process
- */
- ldr r0, =NETARM_GEN_MODULE_BASE
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
- /*
- * setup PLL and System Config
- */
- ldr r0, =NETARM_GEN_MODULE_BASE
-
- ldr r1, =( NETARM_GEN_SYS_CFG_LENDIAN | \
- NETARM_GEN_SYS_CFG_BUSFULL | \
- NETARM_GEN_SYS_CFG_USER_EN | \
- NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
- NETARM_GEN_SYS_CFG_BUSARB_INT | \
- NETARM_GEN_SYS_CFG_BUSMON_EN )
-
- str r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
-
-#ifndef CONFIG_NETARM_PLL_BYPASS
- ldr r1, =( NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
- NETARM_GEN_PLL_CTL_POLTST_DEF | \
- NETARM_GEN_PLL_CTL_INDIV(1) | \
- NETARM_GEN_PLL_CTL_ICP_DEF | \
- NETARM_GEN_PLL_CTL_OUTDIV(2) )
- str r1, [r0, #+NETARM_GEN_PLL_CONTROL]
-#endif
-
- /*
- * mask all IRQs by clearing all bits in the INTMRs
- */
- mov r1, #0
- ldr r0, =NETARM_GEN_MODULE_BASE
- str r1, [r0, #+NETARM_GEN_INTR_ENABLE]
-
-#elif defined(CONFIG_S3C4510B)
-
- /*
- * Mask off all IRQ sources
- */
- ldr r1, =REG_INTMASK
- ldr r0, =0x3FFFFF
- str r0, [r1]
-
- /*
- * Disable Cache
- */
- ldr r0, =REG_SYSCFG
- ldr r1, =0x83ffffa0 /* cache-disabled */
- str r1, [r0]
-
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No specific initialisation for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
- /* Set-up PLL */
- mov r3, #0xAA
- mov r4, #0x55
- /* First disconnect and disable the PLL */
- ldr r0, PLLCON_ADR
- mov r1, #0x00
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Set new M and P values */
- ldr r0, PLLCFG_ADR
- mov r1, #0x23 /* M=4 and P=2 */
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Then enable the PLL */
- ldr r0, PLLCON_ADR
- mov r1, #0x01 /* PLL enable bit */
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Wait for the lock */
- ldr r0, PLLSTAT_ADR
- mov r1, #0x400 /* lock bit */
-lock_loop:
- ldr r2, [r0]
- and r2, r1, r2
- cmp r2, #0
- beq lock_loop
- /* And finally connect the PLL */
- ldr r0, PLLCON_ADR
- mov r1, #0x03 /* PLL enable bit and connect bit */
- str r1, [r0]
- ldr r0, PLLFEED_ADR /* start feed sequence */
- str r3, [r0]
- str r4, [r0] /* feed sequence done */
- /* Set-up VPBDIV register */
- ldr r0, VPBDIV_ADR
- mov r1, #0x01 /* VPB clock is same as process clock */
- str r1, [r0]
-#else
-#error No cpu_init_crit() defined for current CPU type
-#endif
-
-#ifdef CONFIG_ARM7_REVD
- /* set clock speed */
- /* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */
- /* !!! not doing DRAM refresh properly! */
- ldr r0, SYSCON3
- ldr r1, [r0]
- bic r1, r1, #CLKCTL
- orr r1, r1, #CLKCTL_36
- str r1, [r0]
-#endif
-
-#ifndef CONFIG_LPC2292
mov ip, lr
/*
* before relocating, we have to setup RAM timing
*/
bl lowlevel_init
mov lr, ip
-#endif
mov pc, lr
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+#ifndef CONFIG_SPL_BUILD
/*
*************************************************************************
*
bl do_fiq
#endif
-
-#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
- .align 5
-.globl reset_cpu
-reset_cpu:
- mov ip, #0
- mcr p15, 0, ip, c7, c7, 0 @ invalidate cache
- mcr p15, 0, ip, c8, c7, 0 @ flush TLB (v4)
- mrc p15, 0, ip, c1, c0, 0 @ get ctrl register
- bic ip, ip, #0x000f @ ............wcam
- bic ip, ip, #0x2100 @ ..v....s........
- mcr p15, 0, ip, c1, c0, 0 @ ctrl register
- mov pc, r0
-#elif defined(CONFIG_NETARM)
- .align 5
-.globl reset_cpu
-reset_cpu:
- ldr r1, =NETARM_MEM_MODULE_BASE
- ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
- ldr r1, =0xFFFFF000
- and r0, r1, r0
- ldr r1, =(relocate-CONFIG_SYS_TEXT_BASE)
- add r0, r1, r0
- ldr r4, =NETARM_GEN_MODULE_BASE
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETA
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- ldr r1, =NETARM_GEN_SW_SVC_RESETB
- str r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
- mov pc, r0
-#elif defined(CONFIG_S3C4510B)
-/* Nothing done here as reseting the CPU is board specific, depending
- * on external peripherals such as watchdog timers, etc. */
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No specific reset actions for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
- .align 5
-.globl reset_cpu
-reset_cpu:
- mov pc, r0
-#else
-#error No reset_cpu() defined for current CPU type
-#endif
+#endif /* CONFIG_SPL_BUILD */
projects / karo-tx-uboot.git / blobdiff