/*
* Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clk.h>
#include <asm/arch/uart.h>
+#include <asm/arch/mux.h>
#include <asm/io.h>
+#include <dm.h>
static struct clk_pm_regs *clk = (struct clk_pm_regs *)CLK_PM_BASE;
static struct uart_ctrl_regs *ctrl = (struct uart_ctrl_regs *)UART_CTRL_BASE;
+static struct mux_regs *mux = (struct mux_regs *)MUX_BASE;
void lpc32xx_uart_init(unsigned int uart_id)
{
writel(CLK_UART_X_DIV(1) | CLK_UART_Y_DIV(1),
&clk->u3clk + (uart_id - 3));
}
+
+void lpc32xx_mac_init(void)
+{
+ /* Enable MAC interface */
+ writel(CLK_MAC_REG | CLK_MAC_SLAVE | CLK_MAC_MASTER
+#if defined(CONFIG_RMII)
+ | CLK_MAC_RMII,
+#else
+ | CLK_MAC_MII,
+#endif
+ &clk->macclk_ctrl);
+}
+
+void lpc32xx_mlc_nand_init(void)
+{
+ /* Enable NAND interface */
+ writel(CLK_NAND_MLC | CLK_NAND_MLC_INT, &clk->flashclk_ctrl);
+}
+
+void lpc32xx_slc_nand_init(void)
+{
+ /* Enable SLC NAND interface */
+ writel(CLK_NAND_SLC | CLK_NAND_SLC_SELECT, &clk->flashclk_ctrl);
+}
+
+void lpc32xx_i2c_init(unsigned int devnum)
+{
+ /* Enable I2C interface */
+ uint32_t ctrl = readl(&clk->i2cclk_ctrl);
+ if (devnum == 1)
+ ctrl |= CLK_I2C1_ENABLE;
+ if (devnum == 2)
+ ctrl |= CLK_I2C2_ENABLE;
+ writel(ctrl, &clk->i2cclk_ctrl);
+}
+
+U_BOOT_DEVICE(lpc32xx_gpios) = {
+ .name = "gpio_lpc32xx"
+};
+
+/* Mux for SCK0, MISO0, MOSI0. We do not use SSEL0. */
+
+#define P_MUX_SET_SSP0 0x1600
+
+void lpc32xx_ssp_init(void)
+{
+ /* Enable SSP0 interface */
+ writel(CLK_SSP0_ENABLE_CLOCK, &clk->ssp_ctrl);
+ /* Mux SSP0 pins */
+ writel(P_MUX_SET_SSP0, &mux->p_mux_set);
+}