* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include "mxs_init.h"
+#ifdef CONFIG_SYS_SPL_VDDD_VAL
+#define VDDD_VAL CONFIG_SYS_SPL_VDDD_VAL
+#else
+#define VDDD_VAL 1350
+#endif
+#ifdef CONFIG_SYS_SPL_VDDIO_VAL
+#define VDDIO_VAL CONFIG_SYS_SPL_VDDIO_VAL
+#else
+#define VDDIO_VAL 3300
+#endif
+#ifdef CONFIG_SYS_SPL_VDDA_VAL
+#define VDDA_VAL CONFIG_SYS_SPL_VDDA_VAL
+#else
+#define VDDA_VAL 1800
+#endif
+#ifdef CONFIG_SYS_SPL_VDDMEM_VAL
+#define VDDMEM_VAL CONFIG_SYS_SPL_VDDMEM_VAL
+#else
+#define VDDMEM_VAL 1700
+#endif
+
+#ifdef CONFIG_SYS_SPL_VDDD_BO_VAL
+#define VDDD_BO_VAL CONFIG_SYS_SPL_VDDD_BO_VAL
+#else
+#define VDDD_BO_VAL 150
+#endif
+#ifdef CONFIG_SYS_SPL_VDDIO_BO_VAL
+#define VDDIO_BO_VAL CONFIG_SYS_SPL_VDDIO_BO_VAL
+#else
+#define VDDIO_BO_VAL 150
+#endif
+#ifdef CONFIG_SYS_SPL_VDDA_BO_VAL
+#define VDDA_BO_VAL CONFIG_SYS_SPL_VDDA_BO_VAL
+#else
+#define VDDA_BO_VAL 175
+#endif
+#ifdef CONFIG_SYS_SPL_VDDMEM_BO_VAL
+#define VDDMEM_BO_VAL CONFIG_SYS_SPL_VDDMEM_BO_VAL
+#else
+#define VDDMEM_BO_VAL 25
+#endif
+
+#ifdef CONFIG_SYS_SPL_BATT_BO_LEVEL
+#if CONFIG_SYS_SPL_BATT_BO_LEVEL < 2400 || CONFIG_SYS_SPL_BATT_BO_LEVEL > 3640
+#error CONFIG_SYS_SPL_BATT_BO_LEVEL out of range
+#endif
+#define BATT_BO_VAL (((CONFIG_SYS_SPL_BATT_BO_LEVEL) - 2400) / 40)
+#else
+/* Brownout default at 3V */
+#define BATT_BO_VAL ((3000 - 2400) / 40)
+#endif
+
+#ifdef CONFIG_SYS_SPL_FIXED_BATT_SUPPLY
+static const int fixed_batt_supply = 1;
+#else
+static const int fixed_batt_supply;
+#endif
+
+static struct mxs_power_regs *power_regs = (void *)MXS_POWER_BASE;
+
+/**
+ * mxs_power_clock2xtal() - Switch CPU core clock source to 24MHz XTAL
+ *
+ * This function switches the CPU core clock from PLL to 24MHz XTAL
+ * oscilator. This is necessary if the PLL is being reconfigured to
+ * prevent crash of the CPU core.
+ */
static void mxs_power_clock2xtal(void)
{
struct mxs_clkctrl_regs *clkctrl_regs =
&clkctrl_regs->hw_clkctrl_clkseq_set);
}
+/**
+ * mxs_power_clock2pll() - Switch CPU core clock source to PLL
+ *
+ * This function switches the CPU core clock from 24MHz XTAL oscilator
+ * to PLL. This can only be called once the PLL has re-locked and once
+ * the PLL is stable after reconfiguration.
+ */
static void mxs_power_clock2pll(void)
{
struct mxs_clkctrl_regs *clkctrl_regs =
CLKCTRL_CLKSEQ_BYPASS_CPU);
}
-static void mxs_power_clear_auto_restart(void)
+static int mxs_power_wait_rtc_stat(u32 mask)
{
- struct mxs_rtc_regs *rtc_regs =
- (struct mxs_rtc_regs *)MXS_RTC_BASE;
+ int timeout = 5000; /* 3 ms according to i.MX28 Ref. Manual */
+ u32 val;
+ struct mxs_rtc_regs *rtc_regs = (void *)MXS_RTC_BASE;
- writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
- while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
- ;
+ while ((val = readl(&rtc_regs->hw_rtc_stat)) & mask) {
+ early_delay(1);
+ if (timeout-- < 0)
+ break;
+ }
+ return !!(readl(&rtc_regs->hw_rtc_stat) & mask);
+}
- writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
- while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
- ;
+/**
+ * mxs_power_set_auto_restart() - Set the auto-restart bit
+ *
+ * This function ungates the RTC block and sets the AUTO_RESTART
+ * bit to work around a design bug on MX28EVK Rev. A .
+ */
+static int mxs_power_set_auto_restart(int on)
+{
+ struct mxs_rtc_regs *rtc_regs = (void *)MXS_RTC_BASE;
- /*
- * Due to the hardware design bug of mx28 EVK-A
- * we need to set the AUTO_RESTART bit.
- */
+ if (mxs_power_wait_rtc_stat(RTC_STAT_STALE_REGS_PERSISTENT0))
+ return 1;
+
+ /* Do nothing if flag already set */
if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
- return;
+ return 0;
- while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
- ;
+ if ((!(readl(&rtc_regs->hw_rtc_persistent0) &
+ RTC_PERSISTENT0_AUTO_RESTART) ^ !on) == 0)
+ return 0;
- setbits_le32(&rtc_regs->hw_rtc_persistent0,
- RTC_PERSISTENT0_AUTO_RESTART);
- writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
- writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
- while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
- ;
- while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
- ;
+ if (mxs_power_wait_rtc_stat(RTC_STAT_NEW_REGS_PERSISTENT0))
+ return 1;
+
+ clrsetbits_le32(&rtc_regs->hw_rtc_persistent0,
+ !on * RTC_PERSISTENT0_AUTO_RESTART,
+ !!on * RTC_PERSISTENT0_AUTO_RESTART);
+ if (mxs_power_wait_rtc_stat(RTC_STAT_NEW_REGS_PERSISTENT0))
+ return 1;
+
+ return 0;
}
+/**
+ * mxs_power_set_linreg() - Set linear regulators 25mV below DC-DC converter
+ *
+ * This function configures the VDDIO, VDDA and VDDD linear regulators output
+ * to be 25mV below the VDDIO, VDDA and VDDD output from the DC-DC switching
+ * converter. This is the recommended setting for the case where we use both
+ * linear regulators and DC-DC converter to power the VDDIO rail.
+ */
static void mxs_power_set_linreg(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
/* Set linear regulator 25mV below switching converter */
clrsetbits_le32(&power_regs->hw_power_vdddctrl,
POWER_VDDDCTRL_LINREG_OFFSET_MASK,
POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
}
+/**
+ * mxs_get_batt_volt() - Measure battery input voltage
+ *
+ * This function retrieves the battery input voltage and returns it.
+ */
static int mxs_get_batt_volt(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t volt = readl(&power_regs->hw_power_battmonitor);
+
volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
volt *= 8;
return volt;
}
+/**
+ * mxs_is_batt_ready() - Test if the battery provides enough voltage to boot
+ *
+ * This function checks if the battery input voltage is higher than 3.6V and
+ * therefore allows the system to successfully boot using this power source.
+ */
static int mxs_is_batt_ready(void)
{
return (mxs_get_batt_volt() >= 3600);
}
+/**
+ * mxs_is_batt_good() - Test if battery is operational at all
+ *
+ * This function starts recharging the battery and tests if the input current
+ * provided by the 5V input recharging the battery is also sufficient to power
+ * the DC-DC converter.
+ */
static int mxs_is_batt_good(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t volt = mxs_get_batt_volt();
if ((volt >= 2400) && (volt <= 4300))
return 0;
}
+/**
+ * mxs_power_setup_5v_detect() - Start the 5V input detection comparator
+ *
+ * This function enables the 5V detection comparator and sets the 5V valid
+ * threshold to 4.4V . We use 4.4V threshold here to make sure that even
+ * under high load, the voltage drop on the 5V input won't be so critical
+ * to cause undervolt on the 4P2 linear regulator supplying the DC-DC
+ * converter and thus making the system crash.
+ */
static void mxs_power_setup_5v_detect(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
/* Start 5V detection */
clrsetbits_le32(&power_regs->hw_power_5vctrl,
POWER_5VCTRL_VBUSVALID_TRSH_MASK,
POWER_5VCTRL_PWRUP_VBUS_CMPS);
}
+/**
+ * mxs_src_power_init() - Preconfigure the power block
+ *
+ * This function configures reasonable values for the DC-DC control loop
+ * and battery monitor.
+ */
static void mxs_src_power_init(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
/* Improve efficieny and reduce transient ripple */
writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
- setbits_le32(&power_regs->hw_power_battmonitor,
+ if (!fixed_batt_supply) {
+ /* FIXME: This requires the LRADC to be set up! */
+ setbits_le32(&power_regs->hw_power_battmonitor,
POWER_BATTMONITOR_EN_BATADJ);
+ } else {
+ clrbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_EN_BATADJ);
+ }
/* Increase the RCSCALE level for quick DCDC response to dynamic load */
clrsetbits_le32(&power_regs->hw_power_loopctrl,
clrsetbits_le32(&power_regs->hw_power_minpwr,
POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
- /* 5V to battery handoff ... FIXME */
- setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
- early_delay(30);
- clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+ if (!fixed_batt_supply) {
+ /* 5V to battery handoff ... FIXME */
+ setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+ early_delay(30);
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+ }
}
+/**
+ * mxs_power_init_4p2_params() - Configure the parameters of the 4P2 regulator
+ *
+ * This function configures the necessary parameters for the 4P2 linear
+ * regulator to supply the DC-DC converter from 5V input.
+ */
static void mxs_power_init_4p2_params(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
/* Setup 4P2 parameters */
clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
}
+/**
+ * mxs_enable_4p2_dcdc_input() - Enable or disable the DCDC input from 4P2
+ * @xfer: Select if the input shall be enabled or disabled
+ *
+ * This function enables or disables the 4P2 input into the DC-DC converter.
+ */
static void mxs_enable_4p2_dcdc_input(int xfer)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
uint32_t prev_5v_brnout, prev_5v_droop;
POWER_CTRL_ENIRQ_VDD5V_DROOP);
}
+/**
+ * mxs_power_init_4p2_regulator() - Start the 4P2 regulator
+ *
+ * This function enables the 4P2 regulator and switches the DC-DC converter
+ * to use the 4P2 input.
+ */
static void mxs_power_init_4p2_regulator(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t tmp, tmp2;
setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
}
+/**
+ * mxs_power_init_dcdc_4p2_source() - Switch DC-DC converter to 4P2 source
+ *
+ * This function configures the DC-DC converter to be supplied from the 4P2
+ * linear regulator.
+ */
static void mxs_power_init_dcdc_4p2_source(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
if (!(readl(&power_regs->hw_power_dcdc4p2) &
POWER_DCDC4P2_ENABLE_DCDC)) {
hang();
}
}
+/**
+ * mxs_power_enable_4p2() - Power up the 4P2 regulator
+ *
+ * This function drives the process of powering up the 4P2 linear regulator
+ * and switching the DC-DC converter input over to the 4P2 linear regulator.
+ */
static void mxs_power_enable_4p2(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t vdddctrl, vddactrl, vddioctrl;
uint32_t tmp;
&power_regs->hw_power_charge_clr);
}
+/**
+ * mxs_boot_valid_5v() - Boot from 5V supply
+ *
+ * This function configures the power block to boot from valid 5V input.
+ * This is called only if the 5V is reliable and can properly supply the
+ * CPU. This function proceeds to configure the 4P2 converter to be supplied
+ * from the 5V input.
+ */
static void mxs_boot_valid_5v(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
/*
* Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
* disconnect event. FIXME
mxs_power_enable_4p2();
}
+/**
+ * mxs_powerdown() - Shut down the system
+ *
+ * This function powers down the CPU completely.
+ */
static void mxs_powerdown(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
&power_regs->hw_power_reset);
}
+/**
+ * mxs_batt_boot() - Configure the power block to boot from battery input
+ *
+ * This function configures the power block to boot from the battery voltage
+ * supply.
+ */
static void mxs_batt_boot(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_ENABLE_DCDC);
clrsetbits_le32(&power_regs->hw_power_5vctrl,
POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
0x8 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+
+ mxs_power_enable_4p2();
}
+/**
+ * mxs_handle_5v_conflict() - Test if the 5V input is reliable
+ *
+ * This function tests if the 5V input can reliably supply the system. If it
+ * can, then proceed to configuring the system to boot from 5V source, otherwise
+ * try booting from battery supply. If we can not boot from battery supply
+ * either, shut down the system.
+ */
static void mxs_handle_5v_conflict(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t tmp;
setbits_le32(&power_regs->hw_power_vddioctrl,
}
}
+/**
+ * mxs_5v_boot() - Configure the power block to boot from 5V input
+ *
+ * This function handles configuration of the power block when supplied by
+ * a 5V input.
+ */
static void mxs_5v_boot(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
/*
* NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
* but their implementation always returns 1 so we omit it here.
mxs_handle_5v_conflict();
}
+/**
+ * mxs_init_batt_bo() - Configure battery brownout threshold
+ *
+ * This function configures the battery input brownout threshold. The value
+ * at which the battery brownout happens is configured to 3.0V in the code.
+ */
static void mxs_init_batt_bo(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
+ writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
- /* Brownout at 3V */
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_PWDN_5VBRNOUT |
+ POWER_5VCTRL_ENABLE_DCDC |
+ POWER_5VCTRL_ILIMIT_EQ_ZERO |
+ POWER_5VCTRL_PWDN_5VBRNOUT |
+ POWER_5VCTRL_PWD_CHARGE_4P2_MASK);
+
+ writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
+
+ clrbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET |
+ POWER_VDDDCTRL_ENABLE_LINREG |
+ POWER_VDDDCTRL_DISABLE_STEPPING);
+
+ clrbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
+ POWER_VDDACTRL_DISABLE_STEPPING);
+
+ clrbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_DISABLE_FET |
+ POWER_VDDIOCTRL_DISABLE_STEPPING);
+
+ /* Stop 5V detection */
+ writel(POWER_5VCTRL_PWRUP_VBUS_CMPS,
+ &power_regs->hw_power_5vctrl_clr);
+}
+
+static void mxs_init_batt_bo(void)
+{
clrsetbits_le32(&power_regs->hw_power_battmonitor,
POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
- 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
+ BATT_BO_VAL << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
}
+/**
+ * mxs_switch_vddd_to_dcdc_source() - Switch VDDD rail to DC-DC converter
+ *
+ * This function turns off the VDDD linear regulator and therefore makes
+ * the VDDD rail be supplied only by the DC-DC converter.
+ */
static void mxs_switch_vddd_to_dcdc_source(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
clrsetbits_le32(&power_regs->hw_power_vdddctrl,
POWER_VDDDCTRL_LINREG_OFFSET_MASK,
POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
POWER_VDDDCTRL_DISABLE_STEPPING);
}
+/**
+ * mxs_power_configure_power_source() - Configure power block source
+ *
+ * This function is the core of the power configuration logic. The function
+ * selects the power block input source and configures the whole power block
+ * accordingly. After the configuration is complete and the system is stable
+ * again, the function switches the CPU clock source back to PLL. Finally,
+ * the function switches the voltage rails to DC-DC converter.
+ */
static void mxs_power_configure_power_source(void)
{
- int batt_ready, batt_good;
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
struct mxs_lradc_regs *lradc_regs =
(struct mxs_lradc_regs *)MXS_LRADC_BASE;
mxs_src_power_init();
- if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
- batt_ready = mxs_is_batt_ready();
- if (batt_ready) {
- /* 5V source detected, good battery detected. */
- mxs_batt_boot();
- } else {
- batt_good = mxs_is_batt_good();
- if (!batt_good) {
- /* 5V source detected, bad battery detected. */
- writel(LRADC_CONVERSION_AUTOMATIC,
- &lradc_regs->hw_lradc_conversion_clr);
- clrbits_le32(&power_regs->hw_power_battmonitor,
- POWER_BATTMONITOR_BATT_VAL_MASK);
+ if (!fixed_batt_supply) {
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ if (mxs_is_batt_ready()) {
+ /* 5V source detected, good battery detected. */
+ mxs_batt_boot();
+ } else {
+ if (!mxs_is_batt_good()) {
+ /* 5V source detected, bad battery detected. */
+ writel(LRADC_CONVERSION_AUTOMATIC,
+ &lradc_regs->hw_lradc_conversion_clr);
+ clrbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_BATT_VAL_MASK);
+ }
+ mxs_5v_boot();
}
- mxs_5v_boot();
+ } else {
+ /* 5V not detected, booting from battery. */
+ mxs_batt_boot();
}
} else {
- /* 5V not detected, booting from battery. */
- mxs_batt_boot();
+ mxs_fixed_batt_boot();
}
mxs_power_clock2pll();
mxs_switch_vddd_to_dcdc_source();
-#ifdef CONFIG_MX23
+#ifdef CONFIG_SOC_MX23
/* Fire up the VDDMEM LinReg now that we're all set. */
writel(POWER_VDDMEMCTRL_ENABLE_LINREG | POWER_VDDMEMCTRL_ENABLE_ILIMIT,
&power_regs->hw_power_vddmemctrl);
#endif
}
+/**
+ * mxs_enable_output_rail_protection() - Enable power rail protection
+ *
+ * This function enables overload protection on the power rails. This is
+ * triggered if the power rails' voltage drops rapidly due to overload and
+ * in such case, the supply to the powerrail is cut-off, protecting the
+ * CPU from damage. Note that under such condition, the system will likely
+ * crash or misbehave.
+ */
static void mxs_enable_output_rail_protection(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
POWER_VDDIOCTRL_PWDN_BRNOUT);
}
+/**
+ * mxs_get_vddio_power_source_off() - Get VDDIO rail power source
+ *
+ * This function tests if the VDDIO rail is supplied by linear regulator
+ * or by the DC-DC converter. Returns 1 if powered by linear regulator,
+ * returns 0 if powered by the DC-DC converter.
+ */
static int mxs_get_vddio_power_source_off(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t tmp;
- if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ if ((readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) &&
+ !(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ILIMIT_EQ_ZERO)) {
+
tmp = readl(&power_regs->hw_power_vddioctrl);
if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
}
return 0;
-
}
+/**
+ * mxs_get_vddd_power_source_off() - Get VDDD rail power source
+ *
+ * This function tests if the VDDD rail is supplied by linear regulator
+ * or by the DC-DC converter. Returns 1 if powered by linear regulator,
+ * returns 0 if powered by the DC-DC converter.
+ */
static int mxs_get_vddd_power_source_off(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t tmp;
tmp = readl(&power_regs->hw_power_vdddctrl);
return 0;
}
+static int mxs_get_vdda_power_source_off(void)
+{
+ uint32_t tmp;
+
+ tmp = readl(&power_regs->hw_power_vddactrl);
+ if (tmp & POWER_VDDACTRL_DISABLE_FET) {
+ if ((tmp & POWER_VDDACTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDACTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ if (!(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ return 1;
+ }
+ }
+
+ if (!(tmp & POWER_VDDACTRL_ENABLE_LINREG)) {
+ if ((tmp & POWER_VDDACTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
struct mxs_vddx_cfg {
uint32_t *reg;
uint8_t step_mV;
uint16_t lowest_mV;
+ uint16_t highest_mV;
int (*powered_by_linreg)(void);
uint32_t trg_mask;
uint32_t bo_irq;
uint32_t bo_offset_offset;
};
+#define POWER_REG(n) &((struct mxs_power_regs *)MXS_POWER_BASE)->n
+
static const struct mxs_vddx_cfg mxs_vddio_cfg = {
- .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
- hw_power_vddioctrl),
-#if defined(CONFIG_MX23)
+ .reg = POWER_REG(hw_power_vddioctrl),
+#if defined(CONFIG_SOC_MX23)
.step_mV = 25,
#else
.step_mV = 50,
#endif
.lowest_mV = 2800,
+ .highest_mV = 3600,
.powered_by_linreg = mxs_get_vddio_power_source_off,
.trg_mask = POWER_VDDIOCTRL_TRG_MASK,
.bo_irq = POWER_CTRL_VDDIO_BO_IRQ,
};
static const struct mxs_vddx_cfg mxs_vddd_cfg = {
- .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
- hw_power_vdddctrl),
+ .reg = POWER_REG(hw_power_vdddctrl),
.step_mV = 25,
.lowest_mV = 800,
+ .highest_mV = 1575,
.powered_by_linreg = mxs_get_vddd_power_source_off,
.trg_mask = POWER_VDDDCTRL_TRG_MASK,
.bo_irq = POWER_CTRL_VDDD_BO_IRQ,
.bo_offset_offset = POWER_VDDDCTRL_BO_OFFSET_OFFSET,
};
-#ifdef CONFIG_MX23
+static const struct mxs_vddx_cfg mxs_vdda_cfg = {
+ .reg = POWER_REG(hw_power_vddactrl),
+ .step_mV = 50,
+ .lowest_mV = 2800,
+ .highest_mV = 3600,
+ .powered_by_linreg = mxs_get_vdda_power_source_off,
+ .trg_mask = POWER_VDDACTRL_TRG_MASK,
+ .bo_irq = POWER_CTRL_VDDA_BO_IRQ,
+ .bo_enirq = POWER_CTRL_ENIRQ_VDDA_BO,
+ .bo_offset_mask = POWER_VDDACTRL_BO_OFFSET_MASK,
+ .bo_offset_offset = POWER_VDDACTRL_BO_OFFSET_OFFSET,
+};
+
+#ifdef CONFIG_SOC_MX23
static const struct mxs_vddx_cfg mxs_vddmem_cfg = {
- .reg = &(((struct mxs_power_regs *)MXS_POWER_BASE)->
- hw_power_vddmemctrl),
+ .reg = POWER_REG(hw_power_vddmemctrl),
.step_mV = 50,
- .lowest_mV = 1700,
+ .lowest_mV = 1500,
+ .highest_mV = 1700,
.powered_by_linreg = NULL,
.trg_mask = POWER_VDDMEMCTRL_TRG_MASK,
.bo_irq = 0,
};
#endif
+/**
+ * mxs_power_set_vddx() - Configure voltage on DC-DC converter rail
+ * @cfg: Configuration data of the DC-DC converter rail
+ * @new_target: New target voltage of the DC-DC converter rail
+ * @new_brownout: New brownout trigger voltage
+ *
+ * This function configures the output voltage on the DC-DC converter rail.
+ * The rail is selected by the @cfg argument. The new voltage target is
+ * selected by the @new_target and the voltage is specified in mV. The
+ * new brownout value is selected by the @new_brownout argument and the
+ * value is also in mV.
+ */
static void mxs_power_set_vddx(const struct mxs_vddx_cfg *cfg,
uint32_t new_target, uint32_t new_brownout)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
uint32_t cur_target, diff, bo_int = 0;
- uint32_t powered_by_linreg = 0;
- int adjust_up, tmp;
+ int powered_by_linreg = 0;
+ int adjust_up;
+
+ if (new_target < cfg->lowest_mV)
+ new_target = cfg->lowest_mV;
+ if (new_target > cfg->highest_mV)
+ new_target = cfg->highest_mV;
- new_brownout = DIV_ROUND(new_target - new_brownout, cfg->step_mV);
+ new_brownout = DIV_ROUND_CLOSEST(new_target - new_brownout,
+ cfg->step_mV);
cur_target = readl(cfg->reg);
cur_target &= cfg->trg_mask;
if (powered_by_linreg ||
(readl(&power_regs->hw_power_sts) &
- POWER_STS_VDD5V_GT_VDDIO))
+ POWER_STS_VDD5V_GT_VDDIO)) {
early_delay(500);
- else {
- for (;;) {
- tmp = readl(&power_regs->hw_power_sts);
- if (tmp & POWER_STS_DC_OK)
- break;
+ } else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK)) {
+
}
}
}
}
+/**
+ * mxs_setup_batt_detect() - Start the battery voltage measurement logic
+ *
+ * This function starts and configures the LRADC block. This allows the
+ * power initialization code to measure battery voltage and based on this
+ * knowledge, decide whether to boot at all, boot from battery or boot
+ * from 5V input.
+ */
static void mxs_setup_batt_detect(void)
{
mxs_lradc_init();
early_delay(10);
}
+/**
+ * mxs_ungate_power() - Ungate the POWER block
+ *
+ * This function ungates clock to the power block. In case the power block
+ * was still gated at this point, it will not be possible to configure the
+ * block and therefore the power initialization would fail. This function
+ * is only needed on i.MX233, on i.MX28 the power block is always ungated.
+ */
static void mxs_ungate_power(void)
{
-#ifdef CONFIG_MX23
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
+#ifdef CONFIG_SOC_MX23
writel(POWER_CTRL_CLKGATE, &power_regs->hw_power_ctrl_clr);
#endif
}
+#ifdef CONFIG_CONFIG_MACH_MX28EVK
+#define auto_restart 1
+#else
+#define auto_restart 0
+#endif
+
+/**
+ * mxs_power_init() - The power block init main function
+ *
+ * This function calls all the power block initialization functions in
+ * proper sequence to start the power block.
+ */
void mxs_power_init(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
mxs_ungate_power();
mxs_power_clock2xtal();
- mxs_power_clear_auto_restart();
+ if (mxs_power_set_auto_restart(auto_restart)) {
+ serial_puts("Inconsistent value in RTC_PERSISTENT0 register; power-on-reset required\n");
+ }
mxs_power_set_linreg();
- mxs_power_setup_5v_detect();
- mxs_setup_batt_detect();
+ if (!fixed_batt_supply) {
+ mxs_power_setup_5v_detect();
+ mxs_setup_batt_detect();
+ }
mxs_power_configure_power_source();
mxs_enable_output_rail_protection();
- mxs_power_set_vddx(&mxs_vddio_cfg, 3300, 3150);
- mxs_power_set_vddx(&mxs_vddd_cfg, 1500, 1000);
-#ifdef CONFIG_MX23
- mxs_power_set_vddx(&mxs_vddmem_cfg, 2500, 1700);
+ mxs_power_set_vddx(&mxs_vddio_cfg, VDDIO_VAL, VDDIO_BO_VAL);
+ mxs_power_set_vddx(&mxs_vddd_cfg, VDDD_VAL, VDDD_BO_VAL);
+ mxs_power_set_vddx(&mxs_vdda_cfg, VDDA_VAL, VDDA_BO_VAL);
+#ifdef CONFIG_SOC_MX23
+ mxs_power_set_vddx(&mxs_vddmem_cfg, VDDMEM_VAL, VDDMEM_BO_VAL);
+
+ setbits_le32(&power_regs->hw_power_vddmemctrl,
+ POWER_VDDMEMCTRL_ENABLE_LINREG);
+ early_delay(500);
+ clrbits_le32(&power_regs->hw_power_vddmemctrl,
+ POWER_VDDMEMCTRL_ENABLE_ILIMIT);
+#else
+ clrbits_le32(&power_regs->hw_power_vddmemctrl,
+ POWER_VDDMEMCTRL_ENABLE_LINREG);
#endif
writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
-
- writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
-
- early_delay(1000);
+ if (!fixed_batt_supply)
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+ &power_regs->hw_power_5vctrl_set);
}
#ifdef CONFIG_SPL_MXS_PSWITCH_WAIT
+/**
+ * mxs_power_wait_pswitch() - Wait for power switch to be pressed
+ *
+ * This function waits until the power-switch was pressed to start booting
+ * the board.
+ */
void mxs_power_wait_pswitch(void)
{
- struct mxs_power_regs *power_regs =
- (struct mxs_power_regs *)MXS_POWER_BASE;
-
while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
;
}