am33xx: Update DT files, add am335x_gp_evm_config target

[karo-tx-uboot.git] / arch / arm / cpu / armv7 / am33xx / board.c

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index fb44cc8290aaf33cb8c7d1e1496eabc537e70ec9..2f9575866a5675a47e0af0fc618dfa2aa02a45e6 100644 (file)
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -9,7 +9,9 @@
  */
 
 #include <common.h>
+#include <dm.h>
 #include <errno.h>
+#include <ns16550.h>
 #include <spl.h>
 #include <asm/arch/cpu.h>
 #include <asm/arch/hardware.h>
@@ -36,6 +38,40 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#if defined(CONFIG_DM_SERIAL) && !defined(CONFIG_OF_CONTROL)
+/*
+ * TODO(sjg@chromium.org): When we can move SPL serial to DM, we can remove
+ * the CONFIGs. At the same time, we should move this to the board files.
+ */
+static const struct ns16550_platdata am33xx_serial[] = {
+       { CONFIG_SYS_NS16550_COM1, 2, CONFIG_SYS_NS16550_CLK },
+# ifdef CONFIG_SYS_NS16550_COM2
+       { CONFIG_SYS_NS16550_COM2, 2, CONFIG_SYS_NS16550_CLK },
+#  ifdef CONFIG_SYS_NS16550_COM3
+       { CONFIG_SYS_NS16550_COM3, 2, CONFIG_SYS_NS16550_CLK },
+       { CONFIG_SYS_NS16550_COM4, 2, CONFIG_SYS_NS16550_CLK },
+       { CONFIG_SYS_NS16550_COM5, 2, CONFIG_SYS_NS16550_CLK },
+       { CONFIG_SYS_NS16550_COM6, 2, CONFIG_SYS_NS16550_CLK },
+#  endif
+# endif
+};
+
+U_BOOT_DEVICES(am33xx_uarts) = {
+       { "serial_omap", &am33xx_serial[0] },
+#  ifdef CONFIG_SYS_NS16550_COM2
+       { "serial_omap", &am33xx_serial[1] },
+#   ifdef CONFIG_SYS_NS16550_COM3
+       { "serial_omap", &am33xx_serial[2] },
+       { "serial_omap", &am33xx_serial[3] },
+       { "serial_omap", &am33xx_serial[4] },
+       { "serial_omap", &am33xx_serial[5] },
+#   endif
+#  endif
+};
+#endif
+
+
+#ifndef CONFIG_DM_GPIO
 static const struct gpio_bank gpio_bank_am33xx[] = {
        { (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
        { (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -48,9 +84,10 @@ static const struct gpio_bank gpio_bank_am33xx[] = {
 };
 
 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
+#endif
 
 #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
-int cpu_mmc_init(bd_t *bis)
+int __cpu_mmc_init(bd_t *bis)
 {
        int ret;
 
@@ -60,10 +97,12 @@ int cpu_mmc_init(bd_t *bis)
 
        return omap_mmc_init(1, 0, 0, -1, -1);
 }
+/* let platform code be able to override this! */
+int cpu_mmc_init(bd_t *bis) __attribute__((weak, alias("__cpu_mmc_init")));
 #endif
 
 /* AM33XX has two MUSB controllers which can be host or gadget */
-#if (defined(CONFIG_MUSB_GADGET) || defined(CONFIG_MUSB_HOST)) && \
+#if (defined(CONFIG_USB_MUSB_GADGET) || defined(CONFIG_USB_MUSB_HOST)) && \
        (defined(CONFIG_AM335X_USB0) || defined(CONFIG_AM335X_USB1))
 static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 
@@ -142,7 +181,20 @@ int arch_misc_init(void)
        return 0;
 }
 
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+/*
+ * In the case of non-SPL based booting we'll want to call these
+ * functions a tiny bit later as it will require gd to be set and cleared
+ * and that's not true in s_init in this case so we cannot do it there.
+ */
+int board_early_init_f(void)
+{
+       prcm_init();
+       set_mux_conf_regs();
+
+       return 0;
+}
+
 /*
  * This function is the place to do per-board things such as ramp up the
  * MPU clock frequency.
@@ -200,9 +252,15 @@ static void watchdog_disable(void)
        while (readl(&wdtimer->wdtwwps) != 0x0)
                ;
 }
+
+#ifdef CONFIG_SPL_BUILD
+void board_init_f(ulong dummy)
+{
+       board_early_init_f();
+       sdram_init();
+}
 #endif
 
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
 void s_init(void)
 {
        /*
@@ -212,42 +270,20 @@ void s_init(void)
         */
 #ifdef CONFIG_NOR_BOOT
        enable_norboot_pin_mux();
-#endif
-       /*
-        * Save the boot parameters passed from romcode.
-        * We cannot delay the saving further than this,
-        * to prevent overwrites.
-        */
-#ifdef CONFIG_SPL_BUILD
-       save_omap_boot_params();
 #endif
        watchdog_disable();
-       timer_init();
        set_uart_mux_conf();
        setup_clocks_for_console();
        uart_soft_reset();
-#ifdef CONFIG_NOR_BOOT
+#if defined(CONFIG_NOR_BOOT) || defined(CONFIG_QSPI_BOOT)
+       /* TODO: This does not work, gd is not available yet */
        gd->baudrate = CONFIG_BAUDRATE;
        serial_init();
        gd->have_console = 1;
-#elif defined(CONFIG_SPL_BUILD)
-       gd = &gdata;
-       preloader_console_init();
 #endif
-       prcm_init();
-       set_mux_conf_regs();
 #if defined(CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC)
        /* Enable RTC32K clock */
        rtc32k_enable();
 #endif
-       sdram_init();
 }
 #endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
-       /* Enable D-cache. I-cache is already enabled in start.S */
-       dcache_enable();
-}
-#endif /* !CONFIG_SYS_DCACHE_OFF */