#include <config.h>
#include <asm/arch/imx-regs.h>
#include <generated/asm-offsets.h>
+#include <linux/linkage.h>
/*
* L2CC Cache setup/invalidation/disable
.endm /* init_m4if */
.macro setup_pll pll, freq
- ldr r0, =\pll
+ ldr r2, =\pll
ldr r1, =0x00001232
- str r1, [r0, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */
+ str r1, [r2, #PLL_DP_CTL] /* Set DPLL ON (set UPEN bit): BRMO=1 */
mov r1, #0x2
- str r1, [r0, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
+ str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
ldr r1, W_DP_OP_\freq
- str r1, [r0, #PLL_DP_OP]
- str r1, [r0, #PLL_DP_HFS_OP]
+ str r1, [r2, #PLL_DP_OP]
+ str r1, [r2, #PLL_DP_HFS_OP]
ldr r1, W_DP_MFD_\freq
- str r1, [r0, #PLL_DP_MFD]
- str r1, [r0, #PLL_DP_HFS_MFD]
+ str r1, [r2, #PLL_DP_MFD]
+ str r1, [r2, #PLL_DP_HFS_MFD]
ldr r1, W_DP_MFN_\freq
- str r1, [r0, #PLL_DP_MFN]
- str r1, [r0, #PLL_DP_HFS_MFN]
+ str r1, [r2, #PLL_DP_MFN]
+ str r1, [r2, #PLL_DP_HFS_MFN]
ldr r1, =0x00001232
- str r1, [r0, #PLL_DP_CTL]
-1: ldr r1, [r0, #PLL_DP_CTL]
+ str r1, [r2, #PLL_DP_CTL]
+101:
+ ldr r1, [r2, #PLL_DP_CTL]
ands r1, r1, #0x1
- beq 1b
+ beq 101b
.endm
.macro setup_pll_errata pll, freq
1: ldr r1, [r0, #CLKCTL_CDHIPR]
cmp r1, #0x0
bne 1b
+#elif defined(CONFIG_TX53)
+ @ CCGR registers have been setup via DCD
#else
ldr r1, =0x3FFFFFFF
str r1, [r0, #CLKCTL_CCGR0]
setup_pll PLL1_BASE_ADDR, 864
setup_pll_errata PLL1_BASE_ADDR, W_DP_MFN_800_DIT
#else
+#if !defined(CONFIG_SYS_CPU_CLK) || CONFIG_SYS_CPU_CLK == 800
setup_pll PLL1_BASE_ADDR, 800
+#elif CONFIG_SYS_CPU_CLK == 600
+ setup_pll PLL1_BASE_ADDR, 600
+#else
+#error Unsupported CONFIG_SYS_CPU_CLK value
+#endif
#endif
#if defined(CONFIG_MX51)
setup_pll PLL3_BASE_ADDR, 665
/* Switch peripheral to PLL 3 */
- ldr r0, =CCM_BASE_ADDR
ldr r1, =0x000010C0
- orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
+ orr r1, r1, #CONFIG_SYS_DDR_CLKSEL
str r1, [r0, #CLKCTL_CBCMR]
ldr r1, =0x13239145
str r1, [r0, #CLKCTL_CBCDR]
setup_pll PLL2_BASE_ADDR, 665
/* Switch peripheral to PLL2 */
- ldr r0, =CCM_BASE_ADDR
ldr r1, =0x19239145
str r1, [r0, #CLKCTL_CBCDR]
ldr r1, =0x000020C0
orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
str r1, [r0, #CLKCTL_CBCMR]
+#elif defined(CONFIG_TX53)
+ setup_pll PLL3_BASE_ADDR, 400
+
+ /* Switch peripheral to PLL 3 */
+ ldr r1, [r0, #CLKCTL_CBCMR]
+ bic r1, #(0x3 << 12)
+ orr r1, r1, #(1 << 12)
+ str r1, [r0, #CLKCTL_CBCMR]
+
+ ldr r1, [r0, #CLKCTL_CBCDR]
+ orr r1, r1, #(1 << 25)
+ str r1, [r0, #CLKCTL_CBCDR]
+1:
+ /* make sure change is effective */
+ ldr r1, [r0, #CLKCTL_CDHIPR]
+ tst r1, #0x7f
+ bne 1b
+#if CONFIG_SYS_SDRAM_CLK == 400
+ setup_pll PLL2_BASE_ADDR, 400
+#elif CONFIG_SYS_SDRAM_CLK == 333
+ setup_pll PLL2_BASE_ADDR, 333
+#else
+#error Unsupported CONFIG_SYS_SDRAM_CLK
+#endif
+ /* Switch peripheral to PLL2 */
+ ldr r0, =CCM_BASE_ADDR
+ ldr r1, [r0, #CLKCTL_CBCDR]
+ bic r1, #(1 << 25)
+ str r1, [r0, #CLKCTL_CBCDR]
+
+ ldr r1, [r0, #CLKCTL_CBCMR]
+ bic r1, #(3 << 12)
+ orr r1, #(2 << 12)
+ str r1, [r0, #CLKCTL_CBCMR]
+
+ /* make sure change is effective */
+1:
+ ldr r1, [r0, #CLKCTL_CDHIPR]
+ cmp r1, #0x0
+ bne 1b
#endif
setup_pll PLL3_BASE_ADDR, 216
movhi r1, #0
#else
mov r1, #0
-
#endif
str r1, [r0, #CLKCTL_CACRR]
/* Switch ARM back to PLL 1 */
ldr r1, =CONFIG_SYS_CLKTL_CBCDR
str r1, [r0, #CLKCTL_CBCDR]
#endif
-
+#ifndef CONFIG_TX53
/* Restore the default values in the Gate registers */
ldr r1, =0xFFFFFFFF
str r1, [r0, #CLKCTL_CCGR0]
#if defined(CONFIG_MX53)
str r1, [r0, #CLKCTL_CCGR7]
#endif
+#endif
+#if !defined(CONFIG_TX53)
#if defined(CONFIG_MX51)
/* Use PLL 2 for UART's, get 66.5MHz from it */
ldr r1, =0xA5A2A020
str r1, [r0, #CLKCTL_CSCDR1]
#elif defined(CONFIG_MX53)
/* Switch peripheral to PLL2 */
- ldr r0, =CCM_BASE_ADDR
ldr r1, =0x00808145
orr r1, r1, #(2 << 10)
orr r1, r1, #(0 << 16)
str r1, [r0, #CLKCTL_CBCMR]
/* Change uart clk parent to pll2*/
ldr r1, [r0, #CLKCTL_CSCMR1]
- and r1, r1, #0xfcffffff
- orr r1, r1, #0x01000000
+ bic r1, #(0x3 << 24)
+ orr r1, r1, #(0x1 << 24)
str r1, [r0, #CLKCTL_CSCMR1]
ldr r1, [r0, #CLKCTL_CSCDR1]
- and r1, r1, #0xffffffc0
+ bic r1, #(0x3f << 0)
orr r1, r1, #0x0a
str r1, [r0, #CLKCTL_CSCDR1]
#endif
1: ldr r1, [r0, #CLKCTL_CDHIPR]
cmp r1, #0x0
bne 1b
-
+#endif
mov r1, #0x0
str r1, [r0, #CLKCTL_CCDR]
.section ".text.init", "x"
-.globl lowlevel_init
-lowlevel_init:
+ENTRY(lowlevel_init)
#if defined(CONFIG_MX51)
ldr r0, =GPIO1_BASE_ADDR
ldr r1, [r0, #0x0]
/* r12 saved upper lr*/
mov pc,lr
+ENDPROC(lowlevel_init)
/* Board level setting value */
W_DP_OP_864: .word DP_OP_864
W_DP_OP_665: .word DP_OP_665
W_DP_MFD_665: .word DP_MFD_665
W_DP_MFN_665: .word DP_MFN_665
+W_DP_OP_600: .word DP_OP_600
+W_DP_MFD_600: .word DP_MFD_600
+W_DP_MFN_600: .word DP_MFN_600
+W_DP_OP_400: .word DP_OP_400
+W_DP_MFD_400: .word DP_MFD_400
+W_DP_MFN_400: .word DP_MFN_400
+W_DP_OP_333: .word DP_OP_333
+W_DP_MFD_333: .word DP_MFD_333
+W_DP_MFN_333: .word DP_MFN_333
W_DP_OP_216: .word DP_OP_216
W_DP_MFD_216: .word DP_MFD_216
W_DP_MFN_216: .word DP_MFN_216
projects / karo-tx-uboot.git / blobdiff