*/
#include <common.h>
-#include <stdbool.h>
-#include <dm.h>
#include <div64.h>
#include <ipu.h>
-#include <imx_thermal.h>
+#include <fuse.h>
#include <asm/armv7.h>
#include <asm/bootm.h>
#include <asm/pl310.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/crm_regs.h>
-#include <asm/arch/regs-ocotp.h>
#include <asm/arch/clock.h>
-#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/regs-ocotp.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/boot_mode.h>
#include <asm/imx-common/dma.h>
+#include <stdbool.h>
+#include <asm/arch/mxc_hdmi.h>
+#include <asm/arch/crm_regs.h>
+#include <dm.h>
+#include <imx_thermal.h>
DECLARE_GLOBAL_DATA_PTR;
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 reg = readl(&anatop->digprog_sololite);
u32 type = ((reg >> 16) & 0xff);
+ u32 major, cfg = 0;
if (type != MXC_CPU_MX6SL) {
reg = readl(&anatop->digprog);
struct scu_regs *scu = (struct scu_regs *)SCU_BASE_ADDR;
- u32 cfg = readl(&scu->config) & 3;
+ cfg = readl(&scu->config) & 3;
type = ((reg >> 16) & 0xff);
if (type == MXC_CPU_MX6DL) {
if (!cfg)
}
}
+ major = ((reg >> 8) & 0xff);
+ if ((major >= 1) &&
+ ((type == MXC_CPU_MX6Q) || (type == MXC_CPU_MX6D))) {
+ major--;
+ type = MXC_CPU_MX6QP;
+ if (cfg == 1)
+ type = MXC_CPU_MX6DP;
+ }
reg &= 0xff; /* mx6 silicon revision */
- return (type << 12) | (reg + 0x10);
+ return (type << 12) | (reg + (0x10 * (major + 1)));
+}
+
+/*
+ * OCOTP_CFG3[17:16] (see Fusemap Description Table offset 0x440)
+ * defines a 2-bit SPEED_GRADING
+ */
+#define OCOTP_CFG3_SPEED_SHIFT 16
+#define OCOTP_CFG3_SPEED_800MHZ 0
+#define OCOTP_CFG3_SPEED_850MHZ 1
+#define OCOTP_CFG3_SPEED_1GHZ 2
+#define OCOTP_CFG3_SPEED_1P2GHZ 3
+
+u32 get_cpu_speed_grade_hz(void)
+{
+ uint32_t val;
+
+ if (fuse_read(0, 3, &val)) {
+ printf("Failed to read speed_grade fuse\n");
+ return 0;
+ }
+ val >>= OCOTP_CFG3_SPEED_SHIFT;
+ val &= 0x3;
+
+ switch (val) {
+ /* Valid for IMX6DQ */
+ case OCOTP_CFG3_SPEED_1P2GHZ:
+ if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ return 1200000000;
+ /* Valid for IMX6SX/IMX6SDL/IMX6DQ */
+ case OCOTP_CFG3_SPEED_1GHZ:
+ return 996000000;
+ /* Valid for IMX6DQ */
+ case OCOTP_CFG3_SPEED_850MHZ:
+ if (is_cpu_type(MXC_CPU_MX6Q) || is_cpu_type(MXC_CPU_MX6D))
+ return 852000000;
+ /* Valid for IMX6SX/IMX6SDL/IMX6DQ */
+ case OCOTP_CFG3_SPEED_800MHZ:
+ return 792000000;
+ }
+ return 0;
+}
+
+/*
+ * OCOTP_MEM0[7:6] (see Fusemap Description Table offset 0x480)
+ * defines a 2-bit Temperature Grade
+ *
+ * return temperature grade and min/max temperature in celcius
+ */
+#define OCOTP_MEM0_TEMP_SHIFT 6
+
+u32 get_cpu_temp_grade(int *minc, int *maxc)
+{
+ uint32_t val;
+
+ if (fuse_read(1, 0, &val)) {
+ printf("Failed to read temp_grade fuse\n");
+ val = 0;
+ }
+ val >>= OCOTP_MEM0_TEMP_SHIFT;
+ val &= 0x3;
+
+ if (minc && maxc) {
+ if (val == TEMP_AUTOMOTIVE) {
+ *minc = -40;
+ *maxc = 125;
+ } else if (val == TEMP_INDUSTRIAL) {
+ *minc = -40;
+ *maxc = 105;
+ } else if (val == TEMP_EXTCOMMERCIAL) {
+ *minc = -20;
+ *maxc = 105;
+ } else {
+ *minc = 0;
+ *maxc = 95;
+ }
+ }
+ return val;
}
#ifdef CONFIG_REVISION_TAG
struct mx6_ocotp_regs *const ocotp_regs = (void *)OCOTP_BASE_ADDR;
if (!thermal_calib) {
- ocotp_clk_enable();
- writel(1, &ocotp_regs->hw_ocotp_read_ctrl);
- thermal_calib = readl(&ocotp_regs->hw_ocotp_ana1);
- writel(0, &ocotp_regs->hw_ocotp_read_ctrl);
- ocotp_clk_disable();
+ if (fuse_read(1, 6, &thermal_calib) != 0) {
+ printf("Failed to read thermal calibration data\n");
+ thermal_calib = ~0;
+ }
}
if (thermal_calib == 0 || thermal_calib == 0xffffffff)
{
struct wdog_regs *wdog1 = (struct wdog_regs *)WDOG1_BASE_ADDR;
struct wdog_regs *wdog2 = (struct wdog_regs *)WDOG2_BASE_ADDR;
-
-#ifdef CONFIG_MX6SX
struct wdog_regs *wdog3 = (struct wdog_regs *)WDOG3_BASE_ADDR;
- writew(enable, &wdog3->wmcr);
-#endif
+
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
+ writew(enable, &wdog3->wmcr);
/* Write to the PDE (Power Down Enable) bit */
writew(enable, &wdog1->wmcr);
static void clear_mmdc_ch_mask(void)
{
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
+ u32 reg;
+ reg = readl(&mxc_ccm->ccdr);
/* Clear MMDC channel mask */
- writel(0, &mxc_ccm->ccdr);
+ reg &= ~(MXC_CCM_CCDR_MMDC_CH1_HS_MASK | MXC_CCM_CCDR_MMDC_CH0_HS_MASK);
+ writel(reg, &mxc_ccm->ccdr);
}
static void init_bandgap(void)
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
- struct ocotp_regs *ocotp = (struct ocotp_regs *)OCOTP_BASE_ADDR;
- struct fuse_bank *bank = &ocotp->bank[4];
- struct fuse_bank4_regs *fuse =
- (struct fuse_bank4_regs *)bank->fuse_regs;
-
- u32 value = readl(&fuse->mac_addr_high);
- mac[0] = (value >> 8);
- mac[1] = value;
-
- value = readl(&fuse->mac_addr_low);
- mac[2] = value >> 24;
- mac[3] = value >> 16;
- mac[4] = value >> 8;
- mac[5] = value;
+ unsigned int mac0, mac1;
+
+ memset(mac, 0, 6);
+ if (dev_id < 0 || dev_id > 2)
+ return;
+
+ if (fuse_read(4, 2, &mac0)) {
+ printf("Failed to read MAC0 fuse\n");
+ return;
+ }
+ if (fuse_read(4, 3, &mac1)) {
+ printf("Failed to read MAC1 fuse\n");
+ return;
+ }
+ mac[0] = mac1 >> 8;
+ mac[1] = mac1;
+ mac[2] = mac0 >> 24;
+ mac[3] = mac0 >> 16;
+ if (dev_id == 0) {
+ mac[4] = mac0 >> 8;
+ mac[5] = mac0;
+ } else {
+ mac[4] = mac1 >> 24;
+ mac[5] = mac1 >> 16;
+ }
}
#endif
u32 mask528;
u32 reg, periph1, periph2;
- if (is_cpu_type(MXC_CPU_MX6SX))
+ if (is_cpu_type(MXC_CPU_MX6SX) || is_cpu_type(MXC_CPU_MX6UL))
return;
/* Due to hardware limitation, on MX6Q we need to gate/ungate all PFDs
projects / karo-tx-uboot.git / blobdiff