_bss_start_ofs:
.word __bss_start - _start
-.global _image_copy_end_ofs
-_image_copy_end_ofs:
- .word __image_copy_end - _start
-
.globl _bss_end_ofs
_bss_end_ofs:
.word __bss_end - _start
reset:
bl save_boot_params
/*
- * set the cpu to SVC32 mode
+ * disable interrupts (FIQ and IRQ), also set the cpu to SVC32 mode,
+ * except if in HYP mode already
*/
mrs r0, cpsr
- bic r0, r0, #0x1f
- orr r0, r0, #0xd3
+ and r1, r0, #0x1f @ mask mode bits
+ teq r1, #0x1a @ test for HYP mode
+ bicne r0, r0, #0x1f @ clear all mode bits
+ orrne r0, r0, #0x13 @ set SVC mode
+ orr r0, r0, #0xc0 @ disable FIQ and IRQ
msr cpsr,r0
/*
#ifndef CONFIG_SPL_BUILD
/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
+ * void relocate_code(addr_moni)
*
+ * This function relocates the monitor code.
*/
ENTRY(relocate_code)
- mov r4, r0 /* save addr_sp */
- mov r5, r1 /* save addr of gd */
- mov r6, r2 /* save addr of destination */
+ mov r6, r0 /* save addr of destination */
adr r0, _start
- cmp r0, r6
- moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
+ subs r9, r6, r0 /* r9 <- relocation offset */
beq relocate_done /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _image_copy_end_ofs
add r2, r0, r3 /* r2 <- source end address */
copy_loop:
- ldmia r0!, {r9-r10} /* copy from source address [r0] */
- stmia r1!, {r9-r10} /* copy to target address [r1] */
+ ldmia r0!, {r10-r11} /* copy from source address [r0] */
+ stmia r1!, {r10-r11} /* copy to target address [r1] */
cmp r0, r2 /* until source end address [r2] */
blo copy_loop
* fix .rel.dyn relocations
*/
ldr r0, _TEXT_BASE /* r0 <- Text base */
- sub r9, r6, r0 /* r9 <- relocation offset */
ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
add r10, r10, r0 /* r10 <- sym table in FLASH */
ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
bx lr
+_image_copy_end_ofs:
+ .word __image_copy_end - _start
_rel_dyn_start_ofs:
.word __rel_dyn_start - _start
_rel_dyn_end_ofs:
/*
* Move vector table
*/
-#if !defined(CONFIG_TEGRA)
/* Set vector address in CP15 VBAR register */
ldr r0, =_start
mcr p15, 0, r0, c12, c0, 0 @Set VBAR
-#endif /* !Tegra */
bx lr
@ spots for abort stack
str lr, [r0] @ save caller lr in position 0
@ of saved stack
- mrs r0, spsr @ get the spsr
+ mrs lr, spsr @ get the spsr
str lr, [r0, #4] @ save spsr in position 1 of
@ saved stack
+ ldr lr, [r0] @ restore lr
ldr r0, [r13] @ restore r0
add r13, r13, #4 @ pop stack entry
.endm