am33xx: Update DT files, add am335x_gp_evm_config target

[karo-tx-uboot.git] / arch / arm / dts / am335x-bone-common.dtsi

diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi
index 2f66deda9f5c171b4394046e14dba7b4814588df..fec78349c1f3c895fbd1dcf36782d16b9c891d93 100644 (file)
--- a/arch/arm/dts/am335x-bone-common.dtsi
+++ b/arch/arm/dts/am335x-bone-common.dtsi
@@ -7,9 +7,6 @@
  */
 
 / {
  */
 
 / {

-       model = "TI AM335x BeagleBone";
-       compatible = "ti,am335x-bone", "ti,am33xx";
-

        cpus {
                cpu@0 {
                        cpu0-supply = <&dcdc2_reg>;
        cpus {
                cpu@0 {
                        cpu0-supply = <&dcdc2_reg>;


@@ -21,184 +18,299 @@
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 

-       am33xx_pinmux: pinmux@44e10800 {
+       leds {

                pinctrl-names = "default";
                pinctrl-names = "default";

-               pinctrl-0 = <&clkout2_pin>;
-
-               user_leds_s0: user_leds_s0 {
-                       pinctrl-single,pins = <
-                               0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a5.gpio1_21 */
-                               0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a6.gpio1_22 */
-                               0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a7.gpio1_23 */
-                               0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a8.gpio1_24 */
-                       >;
-               };
+               pinctrl-0 = <&user_leds_s0>;

 
 

-               i2c0_pins: pinmux_i2c0_pins {
-                       pinctrl-single,pins = <
-                               0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
-                               0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
-                       >;
-               };
+               compatible = "gpio-leds";

 
 

-               uart0_pins: pinmux_uart0_pins {
-                       pinctrl-single,pins = <
-                               0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
-                               0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
-                       >;
+               led@2 {
+                       label = "beaglebone:green:heartbeat";
+                       gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "heartbeat";
+                       default-state = "off";

                };
 
                };
 

-               clkout2_pin: pinmux_clkout2_pin {
-                       pinctrl-single,pins = <
-                               0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
-                       >;
+               led@3 {
+                       label = "beaglebone:green:mmc0";
+                       gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "mmc0";
+                       default-state = "off";

                };
 
                };
 

-               cpsw_default: cpsw_default {
-                       pinctrl-single,pins = <
-                               /* Slave 1 */
-                               0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxerr.mii1_rxerr */
-                               0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
-                               0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxdv.mii1_rxdv */
-                               0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
-                               0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
-                               0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
-                               0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
-                               0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_txclk.mii1_txclk */
-                               0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxclk.mii1_rxclk */
-                               0x134 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd3.mii1_rxd3 */
-                               0x138 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd2.mii1_rxd2 */
-                               0x13c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd1.mii1_rxd1 */
-                               0x140 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd0.mii1_rxd0 */
-                       >;
+               led@4 {
+                       label = "beaglebone:green:usr2";
+                       gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "cpu0";
+                       default-state = "off";

                };
 
                };
 

-               cpsw_sleep: cpsw_sleep {
-                       pinctrl-single,pins = <
-                               /* Slave 1 reset value */
-                               0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                       >;
+               led@5 {
+                       label = "beaglebone:green:usr3";
+                       gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "mmc1";
+                       default-state = "off";

                };
                };

+       };

 
 

-               davinci_mdio_default: davinci_mdio_default {
-                       pinctrl-single,pins = <
-                               /* MDIO */
-                               0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
-                               0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
-                       >;
-               };
+       vmmcsd_fixed: fixedregulator@0 {
+               compatible = "regulator-fixed";
+               regulator-name = "vmmcsd_fixed";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+};

 
 

-               davinci_mdio_sleep: davinci_mdio_sleep {
-                       pinctrl-single,pins = <
-                               /* MDIO reset value */
-                               0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                               0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-                       >;
-               };
+&am33xx_pinmux {
+       pinctrl-names = "default";
+       pinctrl-0 = <&clkout2_pin>;
+
+       user_leds_s0: user_leds_s0 {
+               pinctrl-single,pins = <
+                       0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a5.gpio1_21 */
+                       0x58 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a6.gpio1_22 */
+                       0x5c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a7.gpio1_23 */
+                       0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7)    /* gpmc_a8.gpio1_24 */
+               >;

        };
 
        };
 

-       ocp {
-               uart0: serial@44e09000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins>;
+       i2c0_pins: pinmux_i2c0_pins {
+               pinctrl-single,pins = <
+                       0x188 (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_sda.i2c0_sda */
+                       0x18c (PIN_INPUT_PULLUP | MUX_MODE0)    /* i2c0_scl.i2c0_scl */
+               >;
+       };

 
 

-                       status = "okay";
-               };
+       i2c2_pins: pinmux_i2c2_pins {
+               pinctrl-single,pins = <
+                       0x178 (PIN_INPUT_PULLUP | MUX_MODE3)    /* uart1_ctsn.i2c2_sda */
+                       0x17c (PIN_INPUT_PULLUP | MUX_MODE3)    /* uart1_rtsn.i2c2_scl */
+               >;
+       };
+
+       uart0_pins: pinmux_uart0_pins {
+               pinctrl-single,pins = <
+                       0x170 (PIN_INPUT_PULLUP | MUX_MODE0)    /* uart0_rxd.uart0_rxd */
+                       0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+               >;
+       };
+
+       clkout2_pin: pinmux_clkout2_pin {
+               pinctrl-single,pins = <
+                       0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
+               >;
+       };
+
+       cpsw_default: cpsw_default {
+               pinctrl-single,pins = <
+                       /* Slave 1 */
+                       0x110 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxerr.mii1_rxerr */
+                       0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txen.mii1_txen */
+                       0x118 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxdv.mii1_rxdv */
+                       0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
+                       0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
+                       0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
+                       0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
+                       0x12c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_txclk.mii1_txclk */
+                       0x130 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxclk.mii1_rxclk */
+                       0x134 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd3.mii1_rxd3 */
+                       0x138 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd2.mii1_rxd2 */
+                       0x13c (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd1.mii1_rxd1 */
+                       0x140 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mii1_rxd0.mii1_rxd0 */
+               >;
+       };

 
 

-               musb: usb@47400000 {
-                       status = "okay";
+       cpsw_sleep: cpsw_sleep {
+               pinctrl-single,pins = <
+                       /* Slave 1 reset value */
+                       0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+               >;
+       };

 
 

-                       control@44e10000 {
-                               status = "okay";
-                       };
+       davinci_mdio_default: davinci_mdio_default {
+               pinctrl-single,pins = <
+                       /* MDIO */
+                       0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)    /* mdio_data.mdio_data */
+                       0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)                   /* mdio_clk.mdio_clk */
+               >;
+       };

 
 

-                       usb-phy@47401300 {
-                               status = "okay";
-                       };
+       davinci_mdio_sleep: davinci_mdio_sleep {
+               pinctrl-single,pins = <
+                       /* MDIO reset value */
+                       0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+                       0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+               >;
+       };

 
 

-                       usb-phy@47401b00 {
-                               status = "okay";
-                       };
+       mmc1_pins: pinmux_mmc1_pins {
+               pinctrl-single,pins = <
+                       0x160 (PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
+               >;
+       };

 
 

-                       usb@47401000 {
-                               status = "okay";
-                       };
+       emmc_pins: pinmux_emmc_pins {
+               pinctrl-single,pins = <
+                       0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+                       0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+                       0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+                       0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+                       0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+                       0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+                       0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+                       0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+                       0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+                       0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+               >;
+       };
+};

 
 

-                       usb@47401800 {
-                               status = "okay";
-                               dr_mode = "host";
-                       };
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;

 
 

-                       dma-controller@07402000  {
-                               status = "okay";
-                       };
-               };
+       status = "okay";
+};

 
 

-               i2c0: i2c@44e0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins>;
+&usb {
+       status = "okay";
+};

 
 

-                       status = "okay";
-                       clock-frequency = <400000>;
+&usb_ctrl_mod {
+       status = "okay";
+};

 
 

-                       tps: tps@24 {
-                               reg = <0x24>;
-                       };
+&usb0_phy {
+       status = "okay";
+};

 
 

+&usb1_phy {
+       status = "okay";
+};
+
+&usb0 {
+       status = "okay";
+       dr_mode = "peripheral";
+};
+
+&usb1 {
+       status = "okay";
+       dr_mode = "host";
+};
+
+&cppi41dma  {
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins>;
+
+       status = "okay";
+       clock-frequency = <400000>;
+
+       tps: tps@24 {
+               reg = <0x24>;
+       };
+
+       baseboard_eeprom: baseboard_eeprom@50 {
+               compatible = "at,24c256";
+               reg = <0x50>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+               baseboard_data: baseboard_data@0 {
+                       reg = <0 0x100>;

                };
        };
                };
        };

+};

 
 

-       leds {
-               pinctrl-names = "default";
-               pinctrl-0 = <&user_leds_s0>;
+&i2c2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c2_pins>;

 
 

-               compatible = "gpio-leds";
+       status = "okay";
+       clock-frequency = <100000>;

 
 

-               led@2 {
-                       label = "beaglebone:green:heartbeat";
-                       gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "heartbeat";
-                       default-state = "off";
+       cape_eeprom0: cape_eeprom0@54 {
+               compatible = "at,24c256";
+               reg = <0x54>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               cape0_data: cape_data@0 {
+                       reg = <0 0x100>;

                };
                };

+       };

 
 

-               led@3 {
-                       label = "beaglebone:green:mmc0";
-                       gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
-                       linux,default-trigger = "mmc0";
-                       default-state = "off";
+       cape_eeprom1: cape_eeprom1@55 {
+               compatible = "at,24c256";
+               reg = <0x55>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               cape1_data: cape_data@0 {
+                       reg = <0 0x100>;

                };
                };

+       };

 
 

-               led@4 {
-                       label = "beaglebone:green:usr2";
-                       gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
+       cape_eeprom2: cape_eeprom2@56 {
+               compatible = "at,24c256";
+               reg = <0x56>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               cape2_data: cape_data@0 {
+                       reg = <0 0x100>;

                };
                };

+       };

 
 

-               led@5 {
-                       label = "beaglebone:green:usr3";
-                       gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-                       default-state = "off";
+       cape_eeprom3: cape_eeprom3@57 {
+               compatible = "at,24c256";
+               reg = <0x57>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+               cape3_data: cape_data@0 {
+                       reg = <0 0x100>;

                };
        };
 };
 
                };
        };
 };
 

+

 /include/ "tps65217.dtsi"
 
 &tps {
 /include/ "tps65217.dtsi"
 
 &tps {

+       /*
+        * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+        * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+        * mode and risk hardware damage if this mode is entered.
+        *
+        * For details, see linux-omap mailing list May 2015 thread
+        *      [PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+        * In particular, messages:
+        *      http://www.spinics.net/lists/linux-omap/msg118585.html
+        *      http://www.spinics.net/lists/linux-omap/msg118615.html
+        *
+        * You can override this later with
+        *      &tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+        * if you want to use RTC-only mode and made sure you are not affected
+        * by the hardware problems. (Tip: double-check by performing a current
+        * measurement after shutdown: it should be less than 1 mA.)
+        */
+       ti,pmic-shutdown-controller;
+

        regulators {
                dcdc1_reg: regulator@0 {
        regulators {
                dcdc1_reg: regulator@0 {

+                       regulator-name = "vdds_dpr";

                        regulator-always-on;
                };
 
                        regulator-always-on;
                };
 


@@ -221,18 +333,22 @@
                };
 
                ldo1_reg: regulator@3 {
                };
 
                ldo1_reg: regulator@3 {

+                       regulator-name = "vio,vrtc,vdds";

                        regulator-always-on;
                };
 
                ldo2_reg: regulator@4 {
                        regulator-always-on;
                };
 
                ldo2_reg: regulator@4 {

+                       regulator-name = "vdd_3v3aux";

                        regulator-always-on;
                };
 
                ldo3_reg: regulator@5 {
                        regulator-always-on;
                };
 
                ldo3_reg: regulator@5 {

+                       regulator-name = "vdd_1v8";

                        regulator-always-on;
                };
 
                ldo4_reg: regulator@6 {
                        regulator-always-on;
                };
 
                ldo4_reg: regulator@6 {

+                       regulator-name = "vdd_3v3a";

                        regulator-always-on;
                };
        };
                        regulator-always-on;
                };
        };


@@ -252,11 +368,29 @@
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&cpsw_default>;
        pinctrl-1 = <&cpsw_sleep>;

-
+       status = "okay";

 };
 
 &davinci_mdio {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;
 };
 
 &davinci_mdio {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;

+       status = "okay";
+};
+
+&mmc1 {
+       status = "okay";
+       bus-width = <0x4>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins>;
+       cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+       cd-inverted;
+};
+
+&aes {
+       status = "okay";
+};
+
+&sham {
+       status = "okay";

 };
 };