arm: bcmcygnus: Enable Ethernet support

[karo-tx-uboot.git] / board / cm5200 / cmd_cm5200.c

diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 5119a99ca2348bf5f564fc8826fd76bb19ad9b5a..9c40ad7b2a2c9fe885916529ab4e0e39090a9142 100644 (file)
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -1,25 +1,9 @@
 /*
  * (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
  *
- * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com> 
+ * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -27,9 +11,9 @@
 #include <i2c.h>
 #include <usb.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#ifdef CONFIG_CMD_BSP
 
-int do_i2c(char *argv[])
+static int do_i2c_test(char * const argv[])
 {
        unsigned char temp, temp1;
 
@@ -39,25 +23,25 @@ int do_i2c(char *argv[])
        getc();
 
        temp = 0xf0; /* set io 0-4 as output */
-       i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
+       i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1);
 
        printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
                "Press any key to stop\n\n");
 
        while (!tstc()) {
-               i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
+               i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1);
                temp1 = (temp >> 4) & 0x03;
                temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
                temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
                temp = temp1;
-               i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
+               i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1);
        }
        getc();
 
        return 0;
 }
 
-int do_usbtest(char *argv[])
+static int do_usb_test(char * const argv[])
 {
        int i;
        static int usb_stor_curr_dev = -1; /* current device */
@@ -90,7 +74,7 @@ int do_usbtest(char *argv[])
        return 0;
 }
 
-int do_led(char *argv[])
+static int do_led_test(char * const argv[])
 {
        int i = 0;
        struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
@@ -134,7 +118,7 @@ int do_led(char *argv[])
        return 0;
 }
 
-int do_rs232(char *argv[])
+static int do_rs232_test(char * const argv[])
 {
        int error_status = 0;
        struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
@@ -335,7 +319,7 @@ int do_rs232(char *argv[])
                if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
                                0x10000000) {
                        error_status = 2;
-                       printf("%s: failure at rs232_4, rxd status is %d "
+                       printf("%s: failure at rs232_4, rxd status is %lu "
                                "(should be 1)\n", __FUNCTION__,
                                ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
                                        0x10000000) >> 28);
@@ -350,7 +334,7 @@ int do_rs232(char *argv[])
                if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) !=
                                0x00000000) {
                        error_status = 2;
-                       printf("%s: failure at rs232_4, rxd status is %d "
+                       printf("%s: failure at rs232_4, rxd status is %lu "
                                "(should be 0)\n", __FUNCTION__,
                                ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
                                        0x10000000) >> 28);
@@ -366,7 +350,7 @@ int do_rs232(char *argv[])
                if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
                                0x20000000) {
                        error_status = 3;
-                       printf("%s: failure at rs232_4, cts status is %d "
+                       printf("%s: failure at rs232_4, cts status is %lu "
                                "(should be 1)\n", __FUNCTION__,
                                ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
                                        0x20000000) >> 29);
@@ -381,7 +365,7 @@ int do_rs232(char *argv[])
                if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) !=
                                0x00000000) {
                        error_status = 3;
-                       printf("%s: failure at rs232_4, cts status is %d "
+                       printf("%s: failure at rs232_4, cts status is %lu "
                                "(should be 0)\n", __FUNCTION__,
                                ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) &
                                        0x20000000) >> 29);
@@ -392,27 +376,27 @@ int do_rs232(char *argv[])
                error_status = 1;
                break;
        }
-       gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
+       gpio->port_config |= (CONFIG_SYS_GPS_PORT_CONFIG & 0xFF0FF80F);
 
        return error_status;
 }
 
-int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        int rcode = -1;
 
        switch (argc) {
        case 2:
                if (strncmp(argv[1], "i2c", 3) == 0)
-                       rcode = do_i2c(argv);
+                       rcode = do_i2c_test(argv);
                else if (strncmp(argv[1], "led", 3) == 0)
-                       rcode = do_led(argv);
+                       rcode = do_led_test(argv);
                else if (strncmp(argv[1], "usb", 3) == 0)
-                       rcode = do_usbtest(argv);
+                       rcode = do_usb_test(argv);
                break;
        case 3:
                if (strncmp(argv[1], "rs232", 3) == 0)
-                       rcode = do_rs232(argv);
+                       rcode = do_rs232_test(argv);
                break;
        }
 
@@ -435,7 +419,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 U_BOOT_CMD(
        fkt,    4,      1,      cmd_fkt,
-       "fkt     - Function test routines\n",
+       "Function test routines",
        "i2c\n"
        "     - Test I2C communication\n"
        "fkt led\n"
@@ -443,6 +427,6 @@ U_BOOT_CMD(
        "fkt rs232 number\n"
        "     - Test RS232 (loopback plug(s) for RS232 required)\n"
        "fkt usb\n"
-       "     - Test USB communication\n"
+       "     - Test USB communication"
 );
-#endif /* CFG_CMD_BSP */
+#endif /* CONFIG_CMD_BSP */