imported Ka-Ro specific additions to U-Boot 2009.08 for TX28

[karo-tx-uboot.git] / board / cray / L1 / L1.c

diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index a7114eb074ece8394a0c26c608f674b3904a8294..8a06ecc66504e91f4aa4b8b3577c826e62a9b3b2 100755 (executable)
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
-#include <405gp_i2c.h>
+#include <4xx_i2c.h>
 #include <command.h>
 #include <rtc.h>
 #include <post.h>
@@ -139,8 +139,15 @@ int misc_init_r (void)
        struct rtc_time tm;
        char bootcmd[32];
 
-       hdr = (image_header_t *) (CFG_MONITOR_BASE - sizeof (image_header_t));
-       timestamp = (time_t) hdr->ih_time;
+       hdr = (image_header_t *) (CONFIG_SYS_MONITOR_BASE - image_get_header_size ());
+#if defined(CONFIG_FIT)
+       if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
+               puts ("Non legacy image format not supported\n");
+               return -1;
+       }
+#endif
+
+       timestamp = (time_t)image_get_time (hdr);
        to_tm (timestamp, &tm);
        printf ("Welcome to U-Boot on Cray L1. Compiled %4d-%02d-%02d  %2d:%02d:%02d (UTC)\n", tm.tm_year, tm.tm_mon, tm.tm_mday, tm.tm_hour, tm.tm_min, tm.tm_sec);
 
@@ -157,26 +164,26 @@ int misc_init_r (void)
                        setenv ("ethaddr", e);
                }
        }
-       sprintf (bootcmd,"autoscript %X",(unsigned)bootscript);
+       sprintf (bootcmd,"source %X",(unsigned)bootscript);
        setenv ("bootcmd", bootcmd);
        return (0);
 }
 
 /* ------------------------------------------------------------------------- */
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
        return (L1_MEMSIZE);
 }
 
 /* ------------------------------------------------------------------------- */
 /* stubs so we can print dates w/o any nvram RTC.*/
-void rtc_get (struct rtc_time *tmp)
+int rtc_get (struct rtc_time *tmp)
 {
-       return;
+       return 0;
 }
-void rtc_set (struct rtc_time *tmp)
+int rtc_set (struct rtc_time *tmp)
 {
-       return;
+       return 0;
 }
 void rtc_reset (void)
 {
@@ -198,13 +205,13 @@ static void init_sdram (void)
 /* To set the appropriate timings, we need to know the SDRAM speed.    */
 /* We can use the PLB speed since the SDRAM speed is the same as       */
 /* the PLB speed. The PLB speed is the FBK divider times the           */
-/* 405GP reference clock, which on the L1 is 25Mhz.                    */
-/* Thus, if FBK div is 2, SDRAM is 50Mhz; if FBK div is 3, SDRAM is    */
-/* 150Mhz; if FBK is 3, SDRAM is 150Mhz.                               */
+/* 405GP reference clock, which on the L1 is 25MHz.                    */
+/* Thus, if FBK div is 2, SDRAM is 50MHz; if FBK div is 3, SDRAM is    */
+/* 150MHz; if FBK is 3, SDRAM is 150MHz.                               */
 
        /* divisor = ((mfdcr(strap)>> 28) & 0x3); */
 
-/* write SDRAM timing for 100Mhz. */
+/* write SDRAM timing for 100MHz. */
        mtdcr (memcfga, mem_sdtr1);
        mtdcr (memcfgd, 0x0086400D);