ARM: atmel: sama5d4_xplained: enable usb ethernet gadget

[karo-tx-uboot.git] / board / esd / cpci5200 / cpci5200.c

diff --git a/board/esd/cpci5200/cpci5200.c b/board/esd/cpci5200/cpci5200.c
index 6c98f13fb6a329a386ca3ee156f7c2789baf51b1..8bded0bbca69fea6184fccdffe51124601e54d2c 100644 (file)
--- a/board/esd/cpci5200/cpci5200.c
+++ b/board/esd/cpci5200/cpci5200.c
@@ -5,23 +5,7 @@
  * (C) Copyright 2004
  * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -32,6 +16,7 @@
 #include <mpc5xxx.h>
 #include <pci.h>
 #include <command.h>
+#include <netdev.h>
 
 #include "mt46v16m16-75.h"
 
@@ -80,11 +65,11 @@ static void sdram_start(int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
        ulong dramsize = 0;
        ulong test1, test2;
@@ -105,9 +90,9 @@ long int initdram(int board_type)
 
        /* find RAM size using SDRAM CS0 only */
        sdram_start(0);
-       test1 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+       test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
        sdram_start(1);
-       test2 = get_ram_size((long *) CFG_SDRAM_BASE, 0x80000000);
+       test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x80000000);
 
        if (test1 > test2) {
                sdram_start(0);
@@ -143,9 +128,9 @@ long int initdram(int board_type)
 #if 0
        /* find RAM size using SDRAM CS1 only */
        sdram_start(0);
-       get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+       get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
        sdram_start(1);
-       get_ram_size((ulong *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+       get_ram_size((ulong *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
        sdram_start(0);
 #endif
        /* set SDRAM CS1 size according to the amount of RAM found */
@@ -179,10 +164,10 @@ void flash_afterinit(ulong size)
                /* adjust mapping */
                *(vu_long *) MPC5XXX_BOOTCS_START =
                    *(vu_long *) MPC5XXX_CS0_START =
-                   START_REG(CFG_BOOTCS_START | size);
+                   START_REG(CONFIG_SYS_BOOTCS_START | size);
                *(vu_long *) MPC5XXX_BOOTCS_STOP =
                    *(vu_long *) MPC5XXX_CS0_STOP =
-                   STOP_REG(CFG_BOOTCS_START | size, size);
+                   STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
        }
 }
 
@@ -191,15 +176,12 @@ static struct pci_controller hose;
 
 extern void pci_mpc5xxx_init(struct pci_controller *);
 
-void pci_init_board(void
-    ) {
+void pci_init_board(void) {
        pci_mpc5xxx_init(&hose);
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
-
-#define GPIO_PSC1_4    0x01000000UL
+#if defined(CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 
 void init_ide_reset(void)
 {
@@ -215,12 +197,12 @@ void ide_set_reset(int idereset)
        debug("ide_reset(%d)\n", idereset);
 
        if (idereset) {
-               *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4;
+               *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
        } else {
-               *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4;
+               *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
        }
 }
-#endif                         /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
 #define MPC5XXX_SIMPLEIO_GPIO_ENABLE       (MPC5XXX_GPIO + 0x0004)
 #define MPC5XXX_SIMPLEIO_GPIO_DIR          (MPC5XXX_GPIO + 0x000C)
@@ -242,7 +224,7 @@ void init_ata_reset(void)
        debug("init_ata_reset\n");
 
        /* Configure GPIO_WU6 as GPIO output for ATA reset */
-       *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_WU6;
+       *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_WU6;
        *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WU6;
        *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_WU6;
        __asm__ volatile ("sync");
@@ -262,7 +244,12 @@ void init_ata_reset(void)
        }
 }
 
-int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int board_eth_init(bd_t *bis)
+{
+       return pci_eth_init(bis);
+}
+
+int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
        unsigned int addr;
        unsigned int size;
@@ -291,5 +278,7 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
 }
 
 U_BOOT_CMD(writepci, 3, 1, do_writepci,
-          "writepci- Write some data to pcibus\n",
-          "<addr> <size>\n" "        - Write some data to pcibus.\n");
+          "Write some data to pcibus",
+          "<addr> <size>\n"
+          ""
+);