ppc4xx: TLB init file cleanup

[karo-tx-uboot.git] / board / gdsys / gdppc440etx / init.S

diff --git a/board/gdsys/gdppc440etx/init.S b/board/gdsys/gdppc440etx/init.S
index 0bbd45a625bc2340aed9c4b7e1aaa44ea23ca2bd..ba750cb538b13ee7722628a9531df1cbcbcf4610 100644 (file)
--- a/board/gdsys/gdppc440etx/init.S
+++ b/board/gdsys/gdppc440etx/init.S
@@ -51,25 +51,25 @@ tlbtab:
      * the speed up boot process. It is patched after relocation to enable SA_I
      */
     tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_256M, CONFIG_SYS_BOOT_BASE_ADDR,
-       0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+       0, AC_RWX | SA_G/*|SA_I*/)
 
     /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
     tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR,
-       0, AC_R|AC_W|AC_X|SA_G )
+       0, AC_RWX | SA_G )
 
     tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE,
-       0, AC_R|AC_W|AC_X|SA_G|SA_I )
+       0, AC_RWX | SA_IG )
     tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, CONFIG_SYS_PCI_BASE,
-       0, AC_R|AC_W|SA_G|SA_I )
+       0, AC_RW | SA_IG )
 
     /* PCI */
     tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, CONFIG_SYS_PCI_MEMBASE,
-       0, AC_R|AC_W|SA_G|SA_I )
+       0, AC_RW | SA_IG )
     tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1,
-       0, AC_R|AC_W|SA_G|SA_I )
+       0, AC_RW | SA_IG )
     tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2,
-       0, AC_R|AC_W|SA_G|SA_I )
+       0, AC_RW | SA_IG )
     tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3,
-       0, AC_R|AC_W|SA_G|SA_I )
+       0, AC_RW | SA_IG )
 
     tlbtab_end