* Add support for Promess ATC board

[karo-tx-uboot.git] / board / gen860t / ioport.c

diff --git a/board/gen860t/ioport.c b/board/gen860t/ioport.c
index 5d6524dbd3804e965f120d9f0eb28c626f3b53ef..7b3ebd44905b63a87c8c3877773a659475a1a357 100644 (file)
--- a/board/gen860t/ioport.c
+++ b/board/gen860t/ioport.c
@@ -42,8 +42,9 @@
 const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
     /*
         * Port A configuration
-        * Pin          Signal                          Type    Active          Initial state
-        * PA7          fpgaProgramLowOut       Out             Low                     High
+        * Pin  Signal                                  Type    Active  Initial state
+        * PA7  fpgaProgramLowOut               Out             Low                     High
+        * PA1  fpgaCoreVoltageFailLow  In              Low                     N/A
         */
     {  /*          conf ppar psor pdir podr pdat pint     function             */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /* No pin                       */
@@ -62,22 +63,32 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
        /* PA4  */ { 1,   0,   0,   1,   0,   0,   0 }, /* red bicolor LED 0*/
        /* PA3  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PA2  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#if !defined(CONFIG_SC)
+       /* PA1  */ { 1,   0,   0,   0,   0,   0,   0 }, /*      fpgaCoreVoltageFail*/
+#else
        /* PA1  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#endif
        /* PA0  */ { 0,   0,   0,   0,   0,   0,   0 }  /*      */
     },
 
        /*
+        * Port B configuration
         * Pin          Signal                  Type            Active          Initial state
         * PB14         docBusyLowIn    In                      Low                     X
         * PB15         gpio1Sig                Out                     High            Low
         * PB16         fpgaDoneBi              In                      High            X
-        * PB17         swBitOkLowOut   Out                     Low                     Low
+        * PB17         swBitOkLowOut   Out                     Low                     High
         * PB19         speakerVolSig   Out/Hi-Z        High/Low        High (Hi-Z)
         * PB22         fpgaInitLowBi   In                      Low                     X
         * PB23         batteryOkSig    In                      High            X
-     */
-    {  /*          conf ppar psor pdir podr pdat pint    function                      */
-       /* PB31 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+        * PB31         pulseCatcherClr Out                     High            0
+        */
+       {       /*          conf ppar psor pdir podr pdat pint    function                      */
+#if !defined(CONFIG_SC)
+       /* PB31 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#else
+       /* PB31 */ { 1,   0,   0,   1,   0,   0,   0 }, /* pulseCatcherClr      */
+#endif
        /* PB30 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PB29 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PB28 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
@@ -85,19 +96,32 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
        /* PB26 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PB25 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PB24 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#if !defined(CONFIG_SC)
        /* PB23 */ { 1,   0,   0,   0,   0,   0,   0 }, /* batteryOk            */
+#else
+       /* PB23 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#endif
        /* PB22 */ { 1,   0,   0,   0,   0,   0,   0 }, /* fpgaInitLowBi        */
        /* PB21 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PB20 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#if !defined(CONFIG_SC)
        /* PB19 */ { 1,   0,   0,   1,   1,   1,   0 }, /* speakerVol           */
+#else
+       /* PB19 */ { 0,   0,   0,   1,   1,   1,   0 }, /*      */
+#endif
        /* PB18 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
-       /* PB17 */ { 1,   0,   0,   1,   0,   0,   0 }, /* swBitOkLow           */
+       /* PB17 */ { 1,   0,   0,   1,   0,   1,   0 }, /* swBitOkLow           */
        /* PB16 */ { 1,   0,   0,   0,   0,   0,   0 }, /* fpgaDone                     */
        /* PB15 */ { 1,   0,   0,   1,   0,   0,   0 }, /* gpio1                        */
+#if !defined(CONFIG_SC)
        /* PB14 */ { 1,   0,   0,   0,   0,   0,   0 }  /* docBusyLow           */
-    },
+#else
+       /* PB14 */ { 0,   0,   0,   0,   0,   0,   0 }  /*      */
+#endif
+       },
 
        /*
+        * Port C configuration
         * Pin          Signal                          Type    Active          Initial state
         * PC4          i2cBus1EnSig            Out             High            High
         * PC5          i2cBus2EnSig            Out             High            High
@@ -108,29 +132,48 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
         * PC12         systemBitOkIn           In              High            X
         * PC15         selfDreqLow                     In              Low                     X
         */
-    {  /*          conf ppar psor pdir podr pdat pint    function                      */
+       {       /*          conf ppar psor pdir podr pdat pint    function                      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PC15 */ { 1,   0,   0,   0,   0,   0,   0 }, /* selfDreqLowIn        */
        /* PC14 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PC13 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#if !defined(CONFIG_SC)
        /* PC12 */ { 1,   0,   0,   0,   0,   0,   0 }, /* systemBitOkIn        */
+#else
+       /* PC12 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#endif
        /* PC11 */ { 1,   0,   0,   1,   0,   1,   0 }, /* fpgaResetLowOut      */
+#if !defined(CONFIG_SC)
        /* PC10 */ { 1,   0,   0,   1,   0,   1,   0 }, /* i2cBus4EnSig         */
+#else
+       /* PC10 */ { 0,   0,   0,   1,   0,   1,   0 }, /*      */
+#endif
        /* PC9  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
+#if !defined(CONFIG_SC)
        /* PC8  */ { 1,   0,   0,   1,   0,   1,   0 }, /* i2cBus3EnSig         */
+#else
+       /* PC8  */ { 0,   0,   0,   1,   0,   1,   0 }, /*      */
+#endif
        /* PC7  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PC6  */ { 1,   0,   0,   1,   0,   1,   0 }, /* gpio0                        */
+#if !defined(CONFIG_SC)
        /* PC5  */ { 1,   0,   0,   1,   0,   1,   0 }, /* i2cBus2EnSig         */
        /* PC4  */ { 1,   0,   0,   1,   0,   1,   0 }, /* i2cBus1EnSig         */
+#else
+       /* PC5  */ { 0,   0,   0,   1,   0,   1,   0 }, /*      */
+       /* PC4  */ { 0,   0,   0,   1,   0,   1,   0 }, /*      */
+#endif
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }  /*      */
-    },
+       },
 
-    /* Port D configuration */
-    {  /*          conf ppar psor pdir podr pdat pint     function                     */
+       /*
+        * Port D configuration
+        */
+       {       /*          conf ppar psor pdir podr pdat pint     function                     */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* PD15 */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
@@ -149,7 +192,7 @@ const mpc8xx_iop_conf_t iop_conf_tab[NUM_PORTS][PORT_BITS] = {
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }, /*      */
        /* N/A  */ { 0,   0,   0,   0,   0,   0,   0 }  /*      */
-    }
+       }
 };
 
 /*