* adapted from Voipac PXA270 Support by
* Copyright (C) 2013 Sergey Yanovich <ynvich@gmail.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <serial.h>
#include <asm/io.h>
+#include <usb.h>
DECLARE_GLOBAL_DATA_PTR;
#endif
#ifdef CONFIG_CMD_USB
-int usb_board_init(void)
+int board_usb_init(int index, enum usb_init_type init)
{
- writel((UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
- ~(UHCHR_SSEP0 | UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE),
- UHCHR);
+ if (index !=0 || init != USB_INIT_HOST)
+ return -1;
+
+ writel(readl(CKEN) | CKEN10_USBHOST, CKEN);
+
+ writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
+ udelay(11);
+ writel(readl(UHCHR) & ~UHCHR_FHR, UHCHR);
writel(readl(UHCHR) | UHCHR_FSBIR, UHCHR);
while (readl(UHCHR) & UHCHR_FSBIR)
continue; /* required by checkpath.pl */
+ writel(readl(UHCHR) & ~UHCHR_SSEP0, UHCHR);
+ writel(readl(UHCRHDA) & ~(0x1000), UHCRHDA);
+ writel(readl(UHCRHDA) | 0x800, UHCRHDA);
+
writel(readl(UHCHR) & ~UHCHR_SSE, UHCHR);
writel((UHCHIE_UPRIE | UHCHIE_RWIE), UHCHIE);
/* Set port power control mask bits, only 3 ports. */
writel(readl(UHCRHDB) | (0x7<<17), UHCRHDB);
- /* enable port 2 */
- writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS |
- UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR);
-
return 0;
}
-void usb_board_init_fail(void)
-{
- return;
-}
-
-void usb_board_stop(void)
+int usb_board_stop(void)
{
writel(readl(UHCHR) | UHCHR_FHR, UHCHR);
udelay(11);
writel(readl(UHCCOMS) | 1, UHCCOMS);
udelay(10);
+ writel(readl(UHCHR) | UHCHR_SSEP0 | UHCHR_SSE, UHCHR);
+
writel(readl(CKEN) & ~CKEN10_USBHOST, CKEN);
- return;
+ return 0;
}
-#endif
-#ifdef CONFIG_DRIVER_DM9000
-void lp8x4x_eth1_mac_init(void)
+int board_usb_cleanup(int index, enum usb_init_type init)
{
- u8 eth1addr[8];
- int i;
- u8 reg;
-
- eth_getenv_enetaddr_by_index("eth", 1, eth1addr);
- if (!is_valid_ether_addr(eth1addr))
- return;
-
- for (i = 0, reg = 0x10; i < 6; i++, reg++) {
- writeb(reg, (u8 *)(DM9000_IO_2));
- writeb(eth1addr[i], (u8 *)(DM9000_DATA_2));
- }
+ if (index !=0 || init != USB_INIT_HOST)
+ return -1;
+
+ return usb_board_stop();
}
+#endif
+#ifdef CONFIG_DRIVER_DM9000
int board_eth_init(bd_t *bis)
{
- lp8x4x_eth1_mac_init();
return dm9000_initialize(bis);
}
#endif