Add generic support for samsung s3c2440

[karo-tx-uboot.git] / board / mpl / vcma9 / vcma9.c

diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index eaeec828d70b0407c7cd27b529a73be3b2ef413e..978e6fdeff9d9dae12780f2308dab37ee12851bc 100644 (file)
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -78,42 +78,43 @@ int board_init(void)
        struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
        /* to reduce PLL lock time, adjust the LOCKTIME register */
-       clk_power->LOCKTIME = 0xFFFFFF;
+       clk_power->locktime = 0xFFFFFF;
 
        /* configure MPLL */
-       clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+       clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
 
        /* some delay between MPLL and UPLL */
        delay (4000);
 
        /* configure UPLL */
-       clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+       clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
 
        /* some delay between MPLL and UPLL */
        delay (8000);
 
        /* set up the I/O ports */
-       gpio->GPACON = 0x007FFFFF;
-       gpio->GPBCON = 0x002AAAAA;
-       gpio->GPBUP = 0x000002BF;
-       gpio->GPCCON = 0xAAAAAAAA;
-       gpio->GPCUP = 0x0000FFFF;
-       gpio->GPDCON = 0xAAAAAAAA;
-       gpio->GPDUP = 0x0000FFFF;
-       gpio->GPECON = 0xAAAAAAAA;
-       gpio->GPEUP = 0x000037F7;
-       gpio->GPFCON = 0x00000000;
-       gpio->GPFUP = 0x00000000;
-       gpio->GPGCON = 0xFFEAFF5A;
-       gpio->GPGUP = 0x0000F0DC;
-       gpio->GPHCON = 0x0028AAAA;
-       gpio->GPHUP = 0x00000656;
+       gpio->gpacon = 0x007FFFFF;
+       gpio->gpbcon = 0x002AAAAA;
+       gpio->gpbup = 0x000002BF;
+       gpio->gpccon = 0xAAAAAAAA;
+       gpio->gpcup = 0x0000FFFF;
+       gpio->gpdcon = 0xAAAAAAAA;
+       gpio->gpdup = 0x0000FFFF;
+       gpio->gpecon = 0xAAAAAAAA;
+       gpio->gpeup = 0x000037F7;
+       gpio->gpfcon = 0x00000000;
+       gpio->gpfup = 0x00000000;
+       gpio->gpgcon = 0xFFEAFF5A;
+       gpio->gpgup = 0x0000F0DC;
+       gpio->gphcon = 0x0028AAAA;
+       gpio->gphup = 0x00000656;
 
        /* setup correct IRQ modes for NIC */
-       gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */
+       /* rising edge mode */
+       gpio->extint2 = (gpio->extint2 & ~(7<<8)) | (4<<8);
 
        /* select USB port 2 to be host or device (fix to host for now) */
-       gpio->MISCCR |= 0x08;
+       gpio->misccr |= 0x08;
 
        /* init serial */
        gd->baudrate = CONFIG_BAUDRATE;