#include <linux/byteorder/swab.h>
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
/* Board support for 1 or 2 flash devices */
#define FLASH_PORT_WIDTH32
#undef FLASH_PORT_WIDTH16
#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) (x)
+#define FLASH_PORT_WIDTH ushort
+#define FLASH_PORT_WIDTHV vu_short
+#define SWAP(x) (x)
#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) (x)
+#define FLASH_PORT_WIDTH ulong
+#define FLASH_PORT_WIDTHV vu_long
+#define SWAP(x) (x)
#endif
/* Intel-compatible flash ID */
-#define INTEL_COMPAT 0x00890089
-#define INTEL_ALT 0x00B000B0
+#define INTEL_COMPAT 0x00890089
+#define INTEL_ALT 0x00B000B0
/* Intel-compatible flash commands */
-#define INTEL_PROGRAM 0x00100010
-#define INTEL_ERASE 0x00200020
-#define INTEL_CLEAR 0x00500050
-#define INTEL_LOCKBIT 0x00600060
-#define INTEL_PROTECT 0x00010001
-#define INTEL_STATUS 0x00700070
-#define INTEL_READID 0x00900090
-#define INTEL_CONFIRM 0x00D000D0
-#define INTEL_RESET 0xFFFFFFFF
+#define INTEL_PROGRAM 0x00100010
+#define INTEL_ERASE 0x00200020
+#define INTEL_CLEAR 0x00500050
+#define INTEL_LOCKBIT 0x00600060
+#define INTEL_PROTECT 0x00010001
+#define INTEL_STATUS 0x00700070
+#define INTEL_READID 0x00900090
+#define INTEL_CONFIRM 0x00D000D0
+#define INTEL_RESET 0xFFFFFFFF
/* Intel-compatible flash status bits */
-#define INTEL_FINISHED 0x00800080
-#define INTEL_OK 0x00800080
+#define INTEL_FINISHED 0x00800080
+#define INTEL_OK 0x00800080
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
+#define FPW FLASH_PORT_WIDTH
+#define FPWV FLASH_PORT_WIDTHV
#define mb() __asm__ __volatile__ ("" : : : "memory")
ulong size = 0;
extern void flash_preinit(void);
extern void flash_afterinit(ulong, ulong);
- ulong flashbase = CFG_FLASH_BASE;
+ ulong flashbase = CONFIG_SYS_FLASH_BASE;
flash_preinit();
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
switch (i) {
case 0:
memset(&flash_info[i], 0, sizeof(flash_info_t));
/* Protect monitor and environment sectors
*/
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
#ifndef CONFIG_BOOT_ROM
flash_protect ( FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
&flash_info[0] );
#endif
#endif
-#ifdef CFG_ENV_IS_IN_FLASH
+#ifdef CONFIG_ENV_IS_IN_FLASH
flash_protect ( FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0] );
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
#endif
flash_afterinit(flash_info[0].start[0], flash_info[0].size);
/* In U-Boot we support only 32 MB (no bank-switching) */
info->sector_count = 256 / 2;
info->size = 0x04000000 / 2;
- info->start[0] = CFG_FLASH_BASE + 0x02000000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
break; /* => 32 MB */
case (FPW) INTEL_ID_28F128J3A:
info->flash_id += FLASH_28F128J3A;
info->sector_count = 128;
info->size = 0x02000000;
- info->start[0] = CFG_FLASH_BASE + 0x02000000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x02000000;
break; /* => 32 MB */
case (FPW) INTEL_ID_28F640J3A:
info->flash_id += FLASH_28F640J3A;
info->sector_count = 64;
info->size = 0x01000000;
- info->start[0] = CFG_FLASH_BASE + 0x03000000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03000000;
break; /* => 16 MB */
case (FPW) INTEL_ID_28F320J3A:
info->flash_id += FLASH_28F320J3A;
info->sector_count = 32;
info->size = 0x800000;
- info->start[0] = CFG_FLASH_BASE + 0x03800000;
+ info->start[0] = CONFIG_SYS_FLASH_BASE + 0x03800000;
break; /* => 8 MB */
default:
break;
}
- if (info->sector_count > CFG_MAX_FLASH_SECT) {
+ if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CFG_MAX_FLASH_SECT);
- info->sector_count = CFG_MAX_FLASH_SECT;
+ info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+ info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
}
addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
/*
* first, wait for the WSM to be finished. The rationale for
* waiting for the WSM to become idle for at most
- * CFG_FLASH_ERASE_TOUT is as follows. The WSM can be busy
+ * CONFIG_SYS_FLASH_ERASE_TOUT is as follows. The WSM can be busy
* because of: (1) erase, (2) program or (3) lock bit
* configuration. So we just wait for the longest timeout of
* the (1)-(3), i.e. the erase timeout.
start = get_timer (0);
while ((*addr & (FPW) INTEL_FINISHED) != (FPW) INTEL_FINISHED) {
- if (get_timer (start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = (FPW) INTEL_RESET; /* restore read mode */
printf("WSM busy too long, can't get prot status\n");
return 1;
*addr = (FPW) 0x00D000D0; /* erase confirm */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
printf ("Timeout\n");
*addr = (FPW) 0x00B000B0; /* suspend erase */
*addr = (FPW) 0x00FF00FF; /* reset to read mode */
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
start = get_timer(0);
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED) {
- if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT) {
printf("Flash lock bit operation timed out\n");
rc = 1;
break;
*addr = INTEL_PROTECT; /* set */
while ((*addr & INTEL_FINISHED) != INTEL_FINISHED)
{
- if (get_timer(start) > CFG_FLASH_UNLOCK_TOUT)
+ if (get_timer(start) > CONFIG_SYS_FLASH_UNLOCK_TOUT)
{
printf("Flash lock bit operation timed out\n");
rc = 1;
projects / karo-tx-uboot.git / blobdiff