imported Freescale specific U-Boot additions for i.MX28,... release L2.6.31_10.08.01

[karo-tx-uboot.git] / board / pm520 / pm520.c

diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c
index 65c529192a649782bd9f3715476a9ba1ec670b1c..9da1041733f07cbfed9f1c126b4be39c5dc601dd 100755 (executable)
--- a/board/pm520/pm520.c
+++ b/board/pm520/pm520.c
@@ -27,6 +27,7 @@
 #include <common.h>
 #include <mpc5xxx.h>
 #include <pci.h>
+#include <netdev.h>
 
 #if defined(CONFIG_MPC5200_DDR)
 #include "mt46v16m16-75.h"
@@ -36,7 +37,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start (int hi_addr)
 {
        long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -79,16 +80,16 @@ static void sdram_start (int hi_addr)
 
 /*
  * ATTENTION: Although partially referenced initdram does NOT make real use
- *            use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ *            use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
  *            is something else than 0x00000000.
  */
 
 #if defined(CONFIG_MPC5200)
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
        ulong dramsize = 0;
        ulong dramsize2 = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
        ulong test1, test2;
 
        /* setup SDRAM chip selects */
@@ -109,9 +110,9 @@ long int initdram (int board_type)
 
        /* find RAM size using SDRAM CS0 only */
        sdram_start(0);
-       test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+       test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        sdram_start(1);
-       test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+       test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        if (test1 > test2) {
                sdram_start(0);
                dramsize = test1;
@@ -137,10 +138,10 @@ long int initdram (int board_type)
        /* find RAM size using SDRAM CS1 only */
        if (!dramsize)
                sdram_start(0);
-       test2 = test1 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+       test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
        if (!dramsize) {
                sdram_start(1);
-               test2 = get_ram_size((long *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+               test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
        }
        if (test1 > test2) {
                sdram_start(0);
@@ -162,7 +163,7 @@ long int initdram (int board_type)
                *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
        }
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
        /* retrieve size of memory connected to SDRAM CS0 */
        dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -180,17 +181,17 @@ long int initdram (int board_type)
                dramsize2 = 0;
        }
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
        return dramsize + dramsize2;
 }
 
 #elif defined(CONFIG_MGT5100)
 
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
        ulong dramsize = 0;
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
        ulong test1, test2;
 
        /* setup and enable SDRAM chip selects */
@@ -209,9 +210,9 @@ long int initdram (int board_type)
 
        /* find RAM size */
        sdram_start(0);
-       test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+       test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        sdram_start(1);
-       test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+       test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        if (test1 > test2) {
                sdram_start(0);
                dramsize = test1;
@@ -222,12 +223,12 @@ long int initdram (int board_type)
        /* set SDRAM end address according to size */
        *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
        /* Retrieve amount of SDRAM available */
        dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
        return dramsize;
 }
@@ -299,7 +300,7 @@ void pci_init_board(void)
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 
 void init_ide_reset (void)
 {
@@ -312,12 +313,17 @@ void ide_set_reset (int idereset)
        debug ("ide_reset(%d)\n", idereset);
 
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_DOC)
-extern void doc_probe (ulong physadr);
+#if defined(CONFIG_CMD_DOC)
 void doc_init (void)
 {
-       doc_probe (CFG_DOC_BASE);
+       doc_probe (CONFIG_SYS_DOC_BASE);
 }
 #endif
+
+int board_eth_init(bd_t *bis)
+{
+       cpu_eth_init(bis); /* Built in FEC comes first */
+       return pci_eth_init(bis);
+}