*/
#include <common.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
#include <asm/arch/mmc.h>
#include <power/pmic.h>
#include <usb/s3c_udc.h>
#include <asm/arch/cpu.h>
#include <power/max8998_pmic.h>
#include <samsung/misc.h>
+#include <usb.h>
+#include <usb_mass_storage.h>
DECLARE_GLOBAL_DATA_PTR;
-static struct s5pc110_gpio *s5pc110_gpio;
-
u32 get_board_rev(void)
{
return 0;
int board_init(void)
{
/* Set Initial global variables */
- s5pc110_gpio = (struct s5pc110_gpio *)S5PC110_GPIO_BASE;
-
gd->bd->bi_arch_number = MACH_TYPE_GONI;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
+void i2c_init_board(void)
+{
+ gpio_request(S5PC110_GPIO_J43, "i2c_clk");
+ gpio_request(S5PC110_GPIO_J40, "i2c_data");
+ gpio_direction_output(S5PC110_GPIO_J43, 1);
+ gpio_direction_output(S5PC110_GPIO_J40, 1);
+}
+#endif
+
int power_init_board(void)
{
int ret;
int i, ret, ret_sd = 0;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
- s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
+ gpio_request(S5PC110_GPIO_J27, "massmemory_en");
+ gpio_direction_output(S5PC110_GPIO_J27, 1);
/*
* MMC0 GPIO
* GPG0[2] SD_0_CDn -> Not used
* GPG0[3:6] SD_0_DATA[0:3]
*/
- for (i = 0; i < 7; i++) {
- if (i == 2)
+ for (i = S5PC110_GPIO_G00; i < S5PC110_GPIO_G07; i++) {
+ if (i == S5PC110_GPIO_G02)
continue;
/* GPG0[0:6] special function 2 */
- s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
+ gpio_cfg_pin(i, 0x2);
/* GPG0[0:6] pull disable */
- s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* GPG0[0:6] drv 4x */
- s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
ret = s5p_mmc_init(0, 4);
* SD card (T_FLASH) detect and init
* T_FLASH_DETECT: EINT28: GPH3[4] input mode
*/
- s5p_gpio_cfg_pin(&s5pc110_gpio->h3, 4, GPIO_INPUT);
- s5p_gpio_set_pull(&s5pc110_gpio->h3, 4, GPIO_PULL_UP);
+ gpio_request(S5PC110_GPIO_H34, "t_flash_detect");
+ gpio_cfg_pin(S5PC110_GPIO_H34, S5P_GPIO_INPUT);
+ gpio_set_pull(S5PC110_GPIO_H34, S5P_GPIO_PULL_UP);
- if (!s5p_gpio_get_value(&s5pc110_gpio->h3, 4)) {
- for (i = 0; i < 7; i++) {
- if (i == 2)
+ if (!gpio_get_value(S5PC110_GPIO_H34)) {
+ for (i = S5PC110_GPIO_G20; i < S5PC110_GPIO_G27; i++) {
+ if (i == S5PC110_GPIO_G22)
continue;
/* GPG2[0:6] special function 2 */
- s5p_gpio_cfg_pin(&s5pc110_gpio->g2, i, 0x2);
+ gpio_cfg_pin(i, 0x2);
/* GPG2[0:6] pull disable */
- s5p_gpio_set_pull(&s5pc110_gpio->g2, i, GPIO_PULL_NONE);
+ gpio_set_pull(i, S5P_GPIO_PULL_NONE);
/* GPG2[0:6] drv 4x */
- s5p_gpio_set_drv(&s5pc110_gpio->g2, i, GPIO_DRV_4X);
+ gpio_set_drv(i, S5P_GPIO_DRV_4X);
}
ret_sd = s5p_mmc_init(2, 4);
.regs_otg = S5PC110_OTG_BASE,
.usb_phy_ctrl = S5PC110_USB_PHY_CONTROL,
};
+
+int board_usb_init(int index, enum usb_init_type init)
+{
+ debug("USB_udc_probe\n");
+ return s3c_udc_probe(&s5pc110_otg_data);
+}
#endif
#ifdef CONFIG_MISC_INIT_R