*/
#include <common.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
-#include "panda.h"
+#include "panda_mux_data.h"
+
+#ifdef CONFIG_USB_EHCI
+#include <usb.h>
+#include <asm/arch/ehci.h>
+#include <asm/ehci-omap.h>
+#endif
+
+#define PANDA_ULPI_PHY_TYPE_GPIO 182
DECLARE_GLOBAL_DATA_PTR;
"Board: OMAP4 Panda\n"
};
+struct omap4_scrm_regs *const scrm = (struct omap4_scrm_regs *)0x4a30a000;
+
/**
* @brief board_init
*
*/
int misc_init_r(void)
{
+ int phy_type;
+ u32 auxclk, altclksrc;
+
+ /* EHCI is not supported on ES1.0 */
+ if (omap_revision() == OMAP4430_ES1_0)
+ return 0;
+
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+ if (omap_revision() >= OMAP4460_ES1_0 ||
+ omap_revision() <= OMAP4460_ES1_1)
+ setenv("board_name", strcat(CONFIG_SYS_BOARD, "-es"));
+#endif
+
+ gpio_direction_input(PANDA_ULPI_PHY_TYPE_GPIO);
+ phy_type = gpio_get_value(PANDA_ULPI_PHY_TYPE_GPIO);
+
+ if (phy_type == 1) {
+ /* ULPI PHY supplied by auxclk3 derived from sys_clk */
+ debug("ULPI PHY supplied by auxclk3\n");
+
+ auxclk = readl(&scrm->auxclk3);
+ /* Select sys_clk */
+ auxclk &= ~AUXCLK_SRCSELECT_MASK;
+ auxclk |= AUXCLK_SRCSELECT_SYS_CLK << AUXCLK_SRCSELECT_SHIFT;
+ /* Set the divisor to 2 */
+ auxclk &= ~AUXCLK_CLKDIV_MASK;
+ auxclk |= AUXCLK_CLKDIV_2 << AUXCLK_CLKDIV_SHIFT;
+ /* Request auxilary clock #3 */
+ auxclk |= AUXCLK_ENABLE_MASK;
+
+ writel(auxclk, &scrm->auxclk3);
+ } else {
+ /* ULPI PHY supplied by auxclk1 derived from PER dpll */
+ debug("ULPI PHY supplied by auxclk1\n");
+
+ auxclk = readl(&scrm->auxclk1);
+ /* Select per DPLL */
+ auxclk &= ~AUXCLK_SRCSELECT_MASK;
+ auxclk |= AUXCLK_SRCSELECT_PER_DPLL << AUXCLK_SRCSELECT_SHIFT;
+ /* Set the divisor to 16 */
+ auxclk &= ~AUXCLK_CLKDIV_MASK;
+ auxclk |= AUXCLK_CLKDIV_16 << AUXCLK_CLKDIV_SHIFT;
+ /* Request auxilary clock #3 */
+ auxclk |= AUXCLK_ENABLE_MASK;
+
+ writel(auxclk, &scrm->auxclk1);
+ }
+
+ altclksrc = readl(&scrm->altclksrc);
+
+ /* Activate alternate system clock supplier */
+ altclksrc &= ~ALTCLKSRC_MODE_MASK;
+ altclksrc |= ALTCLKSRC_MODE_ACTIVE;
+
+ /* enable clocks */
+ altclksrc |= ALTCLKSRC_ENABLE_INT_MASK | ALTCLKSRC_ENABLE_EXT_MASK;
+
+ writel(altclksrc, &scrm->altclksrc);
+
return 0;
}
-void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+void set_muxconf_regs_essential(void)
{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
- for (i = 0; i < size; i++, pad++)
- writew(pad->val, base + pad->offset);
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential,
+ sizeof(wkup_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ if (omap_revision() >= OMAP4460_ES1_0)
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_essential_4460,
+ sizeof(wkup_padconf_array_essential_4460) /
+ sizeof(struct pad_conf_entry));
}
-/**
- * @brief set_muxconf_regs Setting up the configuration Mux registers
- * specific to the board.
- */
-void set_muxconf_regs(void)
+void set_muxconf_regs_non_essential(void)
{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
- sizeof(core_padconf_array) /
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential,
+ sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
- sizeof(wkup_padconf_array) /
+ if (omap_revision() < OMAP4460_ES1_0)
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential_4430,
+ sizeof(core_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
+ else
+ do_set_mux((*ctrl)->control_padconf_core_base,
+ core_padconf_array_non_essential_4460,
+ sizeof(core_padconf_array_non_essential_4460) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential,
+ sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
+
+ if (omap_revision() < OMAP4460_ES1_0)
+ do_set_mux((*ctrl)->control_padconf_wkup_base,
+ wkup_padconf_array_non_essential_4430,
+ sizeof(wkup_padconf_array_non_essential_4430) /
+ sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ return omap_mmc_init(0, 0, 0, -1, -1);
+}
+#endif
+
+#ifdef CONFIG_USB_EHCI
+
+static struct omap_usbhs_board_data usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+};
+
+int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ int ret;
+ unsigned int utmi_clk;
+
+ /* Now we can enable our port clocks */
+ utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL);
+ utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK;
+ sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk);
+
+ ret = omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+int ehci_hcd_stop(int index)
+{
+ return omap_ehci_hcd_stop();
+}
+#endif
+
+/*
+ * get_board_rev() - get board revision
+ */
+u32 get_board_rev(void)
+{
+ return 0x20;
}
projects / karo-tx-uboot.git / blobdiff