* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
#include <errno.h>
#include <malloc.h>
#include <stdio_dev.h>
#endif
/* Keyboard sampling rate */
-#define REPEAT_RATE (40 / 4) /* 40msec -> 25cps */
+#define REPEAT_RATE 40 /* 40msec -> 25cps */
#define REPEAT_DELAY 10 /* 10 x REPEAT_RATE = 400msec */
#define NUM_LOCK 0x53
unsigned long intpipe;
int intpktsize;
int intinterval;
+ unsigned long last_report;
struct int_queue *intq;
uint32_t repeat_delay;
/* Interrupt polling */
static inline void usb_kbd_poll_for_event(struct usb_device *dev)
{
-#if defined(CONFIG_SYS_USB_EVENT_POLL)
+#if defined(CONFIG_SYS_USB_EVENT_POLL)
struct usb_kbd_pdata *data = dev->privptr;
/* Submit a interrupt transfer request */
data->intinterval);
usb_kbd_irq_worker(dev);
-#elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP)
+#elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) || \
+ defined(CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE)
+#if defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP)
struct usb_interface *iface;
struct usb_kbd_pdata *data = dev->privptr;
iface = &dev->config.if_desc[0];
usb_get_report(dev, iface->desc.bInterfaceNumber,
1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE);
- if (memcmp(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE))
+ if (memcmp(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE)) {
usb_kbd_irq_worker(dev);
-#elif defined(CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE)
+#else
struct usb_kbd_pdata *data = dev->privptr;
if (poll_int_queue(dev, data->intq)) {
usb_kbd_irq_worker(dev);
data->intq = create_int_queue(dev, data->intpipe, 1,
USB_KBD_BOOT_REPORT_SIZE, data->new,
data->intinterval);
+#endif
+ data->last_report = get_timer(0);
+ /* Repeat last usb hid report every REPEAT_RATE ms for keyrepeat */
+ } else if (data->last_report != -1 &&
+ get_timer(data->last_report) > REPEAT_RATE) {
+ usb_kbd_irq_worker(dev);
+ data->last_report = get_timer(0);
}
#endif
}
data->intpktsize = min(usb_maxpacket(dev, data->intpipe),
USB_KBD_BOOT_REPORT_SIZE);
data->intinterval = ep->bInterval;
+ data->last_report = -1;
/* We found a USB Keyboard, install it. */
usb_set_protocol(dev, iface->desc.bInterfaceNumber, 0);
debug("USB KBD: found set idle...\n");
- usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE, 0);
+#if !defined(CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP) && \
+ !defined(CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE)
+ usb_set_idle(dev, iface->desc.bInterfaceNumber, REPEAT_RATE / 4, 0);
+#else
+ usb_set_idle(dev, iface->desc.bInterfaceNumber, 0, 0);
+#endif
debug("USB KBD: enable interrupt pipe...\n");
#ifdef CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
{
int error, i;
- debug("%s: Probing for keyboard\n", __func__);/* Scan all USB Devices */
+ debug("%s: Probing for keyboard\n", __func__);
+#ifdef CONFIG_DM_USB
+ /*
+ * TODO: We should add U_BOOT_USB_DEVICE() declarations to each USB
+ * keyboard driver and then most of this file can be removed.
+ */
+ struct udevice *bus;
+ struct uclass *uc;
+ int ret;
+
+ ret = uclass_get(UCLASS_USB, &uc);
+ if (ret)
+ return ret;
+ uclass_foreach_dev(bus, uc) {
+ for (i = 0; i < USB_MAX_DEVICE; i++) {
+ struct usb_device *dev;
+
+ dev = usb_get_dev_index(bus, i); /* get device */
+ debug("i=%d, %p\n", i, dev);
+ if (!dev)
+ break; /* no more devices available */
+
+ error = probe_usb_keyboard(dev);
+ if (!error)
+ return 1;
+ if (error && error != -ENOENT)
+ return error;
+ } /* for */
+ }
+#else
+ /* Scan all USB Devices */
for (i = 0; i < USB_MAX_DEVICE; i++) {
struct usb_device *dev;
if (error && error != -ENOENT)
return error;
}
+#endif
/* No USB Keyboard found */
return -1;