scm2->pacrg = 0;
scm1->pacrh = 0;
- /* Setup Ports: */
- switch (CFG_UART_PORT) {
- case 0:
- gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
- break;
- case 1:
- gpio->par_uart =
- (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
- break;
- case 2:
- gpio->par_uart = (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
- break;
- }
-
/* Port configuration */
- gpio->par_cs = 0x3E;
+ gpio->par_cs = 0;
-#if (defined(CFG_CS0_BASE) && defined(CFG_CS0_MASK) && defined(CFG_CS0_CTRL))
- fbcs->csar0 = CFG_CS0_BASE;
- fbcs->cscr0 = CFG_CS0_CTRL;
- fbcs->csmr0 = CFG_CS0_MASK;
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
+ fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+ fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+ fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
#endif
-#if (defined(CFG_CS1_BASE) && defined(CFG_CS1_MASK) && defined(CFG_CS1_CTRL))
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
/* Latch chipselect */
- fbcs->csar1 = CFG_CS1_BASE;
- fbcs->cscr1 = CFG_CS1_CTRL;
- fbcs->csmr1 = CFG_CS1_MASK;
+ gpio->par_cs |= GPIO_PAR_CS1;
+ fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+ fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+ fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
#endif
-#if (defined(CFG_CS2_BASE) && defined(CFG_CS2_MASK) && defined(CFG_CS2_CTRL))
- fbcs->csar2 = CFG_CS2_BASE;
- fbcs->cscr2 = CFG_CS2_CTRL;
- fbcs->csmr2 = CFG_CS2_MASK;
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS2;
+ fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+ fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+ fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
#endif
-#if (defined(CFG_CS3_BASE) && defined(CFG_CS3_MASK) && defined(CFG_CS3_CTRL))
- fbcs->csar3 = CFG_CS3_BASE;
- fbcs->cscr3 = CFG_CS3_CTRL;
- fbcs->csmr3 = CFG_CS3_MASK;
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS3;
+ fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+ fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+ fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
#endif
-#if (defined(CFG_CS4_BASE) && defined(CFG_CS4_MASK) && defined(CFG_CS4_CTRL))
- fbcs->csar4 = CFG_CS4_BASE;
- fbcs->cscr4 = CFG_CS4_CTRL;
- fbcs->csmr4 = CFG_CS4_MASK;
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS4;
+ fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+ fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+ fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
#endif
-#if (defined(CFG_CS5_BASE) && defined(CFG_CS5_MASK) && defined(CFG_CS5_CTRL))
- fbcs->csar5 = CFG_CS5_BASE;
- fbcs->cscr5 = CFG_CS5_CTRL;
- fbcs->csmr5 = CFG_CS5_MASK;
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
+ gpio->par_cs |= GPIO_PAR_CS5;
+ fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+ fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+ fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
+#endif
+
+#ifdef CONFIG_FSL_I2C
+ gpio->par_feci2c = GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA;
#endif
icache_enable();
{
return (0);
}
+
+void uart_port_conf(void)
+{
+ volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+ /* Setup Ports: */
+ switch (CONFIG_SYS_UART_PORT) {
+ case 0:
+ gpio->par_uart = (GPIO_PAR_UART_TXD0 | GPIO_PAR_UART_RXD0);
+ break;
+ case 1:
+ gpio->par_uart =
+ (GPIO_PAR_UART_TXD1(3) | GPIO_PAR_UART_RXD1(3));
+ break;
+ case 2:
+ gpio->par_timer &= 0x0F;
+ gpio->par_timer |= (GPIO_PAR_TIN3_URXD2 | GPIO_PAR_TIN2_UTXD2);
+ break;
+ }
+}