Remove unused definition IOMUX_SION

[karo-tx-uboot.git] / doc / README.mpc8360emds

diff --git a/doc/README.mpc8360emds b/doc/README.mpc8360emds
index 5f202475b586b52c98bdd8f943213246af3451c0..6afa753969015f2d2e8a908e40e5f04ca5118e66 100644 (file)
--- a/doc/README.mpc8360emds
+++ b/doc/README.mpc8360emds
@@ -1,7 +1,7 @@
 Freescale MPC8360EMDS Board
 -----------------------------------------
 1.     Board Switches and Jumpers
-1.0    There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
+1.0    There are four Dual-In-Line Packages(DIP) Switches on MPC8360EMDS board
        For some reason, the HW designers describe the switch settings
        in terms of 0 and 1, and then map that to physical switches where
        the label "On" refers to logic 0 and "Off" is logic 1.
@@ -15,7 +15,7 @@ Freescale MPC8360EMDS Board
                "On"  == 0
 
        SW18 is switch 18 as silk-screened onto the board.
-       SW4[8] is the bit labled 8 on Switch 4.
+       SW4[8] is the bit labeled 8 on Switch 4.
        SW2[1:6] refers to bits labeled 1 through 6 in order on switch 2.
        SW3[7:1] refers to bits labeled 7 through 1 in order on switch 3.
        SW3[1:8]= 0000_0001 refers to bits labeled 1 through 6 is set as "On"
@@ -81,34 +81,42 @@ Freescale MPC8360EMDS Board
 
        include/configs/MPC8360EMDS.h
 
-    CONFIG_MPC83XX         MPC83xx family for both MPC8349 and MPC8360
+    CONFIG_MPC83xx         MPC83xx family for both MPC8349 and MPC8360
     CONFIG_MPC8360         MPC8360 specific
     CONFIG_MPC8360EMDS     MPC8360EMDS board specific
 
 4. Compilation
 
+       MPC8360EMDS shipped with 33.33MHz or 66MHz oscillator(check U41 chip).
+
        Assuming you're using BASH shell:
 
                export CROSS_COMPILE=your-cross-compile-prefix
                cd u-boot
                make distclean
-               make MPC8360EMDS_config
+               make MPC8360EMDS_XX_config
                make
 
-       MPC8360 support PCI in host and slave mode.
+       MPC8360EMDS support ATM, PCI in host and slave mode.
+
+       To make u-boot support ATM :
+       1) Make MPC8360EMDS_XX_ATM_config
 
        To make u-boot support PCI host 66M :
        1) DIP SW support PCI mode as described in Section 1.1.
-       2) Make MPC8360EMDS_HOST_66_config
+       2) Make MPC8360EMDS_XX_HOST_66_config
 
        To make u-boot support PCI host 33M :
        1) DIP SW setting is similar as Section 1.1, except for SW3[4] is 1
-       2) Make MPC8360EMDS_HOST_33_config
+       2) Make MPC8360EMDS_XX_HOST_33_config
 
        To make u-boot support PCI slave 66M :
        1) DIP SW setting is similar as Section 1.1, except for SW9[3] is 1
-       2) Make MPC8360EMDS_SLAVE_config
+       2) Make MPC8360EMDS_XX_SLAVE_config
 
+       (where XX is:
+          33 - 33.33MHz oscillator
+          66 - 66MHz oscillator)
 
 5. Downloading and Flashing Images