* Copyright (C) 2010 Freescale Semiconductor, Inc.
* Copyright (C) 2008 Embedded Alley Solutions, Inc.
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * SPDX-License-Identifier: GPL-2.0+
*/
//#define DEBUG
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
-#include <asm/arch/regs-bch.h>
-#include <asm/arch/regs-gpmi.h>
+#include <asm/imx-common/regs-bch.h>
+#include <asm/imx-common/regs-gpmi.h>
#include <asm/arch/sys_proto.h>
-#include <asm/arch/dma.h>
+#include <asm/imx-common/dma.h>
#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
-#ifndef CONFIG_MX6Q
#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512
+#if defined(CONFIG_SOC_MX6)
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 2
#else
-#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE (512 / 4)
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT 0
#endif
-
#define MXS_NAND_METADATA_SIZE 10
-
+#define MXS_NAND_BITS_PER_ECC_LEVEL 13
#define MXS_NAND_COMMAND_BUFFER_SIZE 32
/* BCH timeout in microseconds */
return mtd->writesize / nand->ecc.size;
}
-static uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
+static inline uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
{
- return ecc_strength * 13;
+ return ecc_strength * MXS_NAND_BITS_PER_ECC_LEVEL;
}
static uint32_t mxs_nand_aux_status_offset(void)
static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
uint32_t page_oob_size)
{
- if (page_data_size == 2048)
- return 8;
-
- if (page_data_size == 4096) {
- if (page_oob_size == 128)
- return 8;
+ int ecc_strength;
- if (page_oob_size == 218)
- return 16;
- }
+ /*
+ * Determine the ECC layout with the formula:
+ * ECC bits per chunk = (total page spare data bits) /
+ * (bits per ECC level) / (chunks per page)
+ * where:
+ * total page spare data bits =
+ * (page oob size - meta data size) * (bits per byte)
+ */
+ ecc_strength = ((page_oob_size - MXS_NAND_METADATA_SIZE) * 8)
+ / (MXS_NAND_BITS_PER_ECC_LEVEL *
+ mxs_nand_ecc_chunk_cnt(page_data_size));
- return 0;
+ return round_down(ecc_strength, 2);
}
static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size,
return block_mark_bit_offset;
}
-static uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd)
+static inline uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd)
{
uint32_t ecc_strength;
ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) >> 3;
}
-static uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd)
+static inline uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd)
{
uint32_t ecc_strength;
ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
* swapping the block mark, or swapping it *back* -- but it doesn't matter
* because the the operation is the same.
*/
+#ifndef CONFIG_NAND_MXS_NO_BBM_SWAP
static void mxs_nand_swap_block_mark(struct mtd_info *mtd,
uint8_t *data_buf, uint8_t *oob_buf)
{
uint32_t src;
uint32_t dst;
-return;
+
bit_offset = mxs_nand_mark_bit_offset(mtd);
buf_offset = mxs_nand_mark_byte_offset(mtd);
data_buf[buf_offset] |= dst << bit_offset;
data_buf[buf_offset + 1] |= dst >> (8 - bit_offset);
}
+#else
+static inline void mxs_nand_swap_block_mark(struct mtd_info *mtd,
+ uint8_t *data_buf, uint8_t *oob_buf)
+{
+}
+#endif
/*
* Read data from NAND.
length;
mxs_dma_desc_append(channel, d);
-#ifndef CONFIG_MX6Q
+#ifndef CONFIG_SOC_MX6Q
/*
* A DMA descriptor that waits for the command to end and the chip to
* become ready.
d->cmd.data =
MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM |
- MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+ MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
d->cmd.address = 0;
d->cmd.data =
MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
- (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
(length << MXS_DMA_DESC_BYTES_OFFSET);
d->cmd.address = (dma_addr_t)nand_info->data_buf;
* Read a page from NAND.
*/
static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand,
- uint8_t *buf, int page)
+ uint8_t *buf, int oob_required,
+ int page)
{
struct mxs_nand_info *nand_info = nand->priv;
struct mxs_dma_desc *d;
/*
* Write a page to NAND.
*/
-static void mxs_nand_ecc_write_page(struct mtd_info *mtd,
- struct nand_chip *nand, const uint8_t *buf)
+static int mxs_nand_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *nand, const uint8_t *buf,
+ int oob_required)
{
struct mxs_nand_info *nand_info = nand->priv;
struct mxs_dma_desc *d;
rtn:
mxs_nand_return_dma_descs(nand_info);
+ return 0;
}
/*
struct mxs_nand_info *nand_info = chip->priv;
int ret;
- if (ops->mode == MTD_OOB_RAW)
+ if (ops->mode == MTD_OPS_RAW)
nand_info->raw_oob_mode = 1;
else
nand_info->raw_oob_mode = 0;
struct mxs_nand_info *nand_info = chip->priv;
int ret;
- if (ops->mode == MTD_OOB_RAW)
+ if (ops->mode == MTD_OPS_RAW)
nand_info->raw_oob_mode = 1;
else
nand_info->raw_oob_mode = 0;
* what to do.
*/
static int mxs_nand_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
- int page, int cmd)
+ int page)
{
struct mxs_nand_info *nand_info = nand->priv;
tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT0_ECC0_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
+ >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
writel(tmp, &bch_regs->hw_bch_flash0layout0);
tmp = (mtd->writesize + mtd->oobsize)
<< BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
<< BCH_FLASHLAYOUT1_ECCN_OFFSET;
- tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE
+ >> MXS_NAND_CHUNK_DATA_CHUNK_SIZE_SHIFT;
writel(tmp, &bch_regs->hw_bch_flash0layout1);
/* Set *all* chip selects to use layout 0 */
writel(BCH_CTRL_COMPLETE_IRQ_EN, &bch_regs->hw_bch_ctrl_set);
/* Hook some operations at the MTD level. */
- if (mtd->read_oob != mxs_nand_hook_read_oob) {
- nand_info->hooked_read_oob = mtd->read_oob;
- mtd->read_oob = mxs_nand_hook_read_oob;
+ if (mtd->_read_oob != mxs_nand_hook_read_oob) {
+ nand_info->hooked_read_oob = mtd->_read_oob;
+ mtd->_read_oob = mxs_nand_hook_read_oob;
}
- if (mtd->write_oob != mxs_nand_hook_write_oob) {
- nand_info->hooked_write_oob = mtd->write_oob;
- mtd->write_oob = mxs_nand_hook_write_oob;
+ if (mtd->_write_oob != mxs_nand_hook_write_oob) {
+ nand_info->hooked_write_oob = mtd->_write_oob;
+ mtd->_write_oob = mxs_nand_hook_write_oob;
}
- if (mtd->block_markbad != mxs_nand_hook_block_markbad) {
- nand_info->hooked_block_markbad = mtd->block_markbad;
- mtd->block_markbad = mxs_nand_hook_block_markbad;
+ if (mtd->_block_markbad != mxs_nand_hook_block_markbad) {
+ nand_info->hooked_block_markbad = mtd->_block_markbad;
+ mtd->_block_markbad = mxs_nand_hook_block_markbad;
}
/* We use the reference implementation for bad block management. */
struct mxs_nand_info *nand_info;
int err;
- nand_info = malloc(sizeof(struct mxs_nand_info));
+ nand_info = calloc(1, sizeof(struct mxs_nand_info));
if (!nand_info) {
printf("MXS NAND: Failed to allocate private data\n");
return -ENOMEM;
}
- memset(nand_info, 0, sizeof(struct mxs_nand_info));
err = mxs_nand_alloc_buffers(nand_info);
if (err)
nand->priv = nand_info;
nand->options |= NAND_NO_SUBPAGE_WRITE;
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
- nand->options |= NAND_USE_FLASH_BBT | NAND_USE_FLASH_BBT_NO_OOB;
+ nand->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
#endif
nand->cmd_ctrl = mxs_nand_cmd_ctrl;
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.bytes = 9;
nand->ecc.size = 512;
+ nand->ecc.strength = 8;
return 0;
projects / karo-tx-uboot.git / blobdiff