update to 2015.04-rc1

[karo-tx-uboot.git] / drivers / mtd / nand / omap_gpmc.c

diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c
index 94c18c97d030919f2d87325c028c1bbe1e028cfc..9c56bd3a55c09af46a61ec5c88e74acb54061b50 100644 (file)
--- a/drivers/mtd/nand/omap_gpmc.c
+++ b/drivers/mtd/nand/omap_gpmc.c
@@ -625,6 +625,115 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat,
        return (err) ? err : error_count;
 }
 
+#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
+
+#define PREFETCH_CONFIG1_CS_SHIFT      24
+#define PREFETCH_FIFOTHRESHOLD_MAX     0x40
+#define PREFETCH_FIFOTHRESHOLD(val)    ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val)     (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val)  ((val >> 24) & 0x7F)
+#define ENABLE_PREFETCH                        (1 << 7)
+
+/**
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ * @cs: chip select to use
+ */
+static int omap_prefetch_enable(int fifo_th, unsigned int count, int is_write, int cs)
+{
+       uint32_t val;
+
+       if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+               return -EINVAL;
+
+       if (readl(&gpmc_cfg->prefetch_control))
+               return -EBUSY;
+
+       /* Set the amount of bytes to be prefetched */
+       writel(count, &gpmc_cfg->prefetch_config2);
+
+       val = (cs << PREFETCH_CONFIG1_CS_SHIFT) | (is_write & 1) |
+               PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH;
+       writel(val, &gpmc_cfg->prefetch_config1);
+
+       /*  Start the prefetch engine */
+       writel(1, &gpmc_cfg->prefetch_control);
+
+       return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static void omap_prefetch_reset(void)
+{
+       writel(0, &gpmc_cfg->prefetch_control);
+       writel(0, &gpmc_cfg->prefetch_config1);
+}
+
+static int __read_prefetch_aligned(struct nand_chip *chip, uint32_t *buf, int len)
+{
+       int ret;
+       uint32_t cnt;
+       struct omap_nand_info *info = chip->priv;
+
+       ret = omap_prefetch_enable(PREFETCH_FIFOTHRESHOLD_MAX, len, 0, info->cs);
+       if (ret < 0)
+               return ret;
+
+       do {
+               int i;
+
+               cnt = readl(&gpmc_cfg->prefetch_status);
+               cnt = PREFETCH_STATUS_FIFO_CNT(cnt);
+
+               for (i = 0; i < cnt / 4; i++) {
+                       *buf++ = readl(CONFIG_SYS_NAND_BASE);
+                       len -= 4;
+               }
+       } while (len);
+
+       omap_prefetch_reset();
+
+       return 0;
+}
+
+static void omap_nand_read_prefetch8(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+       int ret;
+       uint32_t head, tail;
+       struct nand_chip *chip = mtd->priv;
+
+       /*
+        * If the destination buffer is unaligned, start with reading
+        * the overlap byte-wise.
+        */
+       head = ((uint32_t) buf) % 4;
+       if (head) {
+               nand_read_buf(mtd, buf, head);
+               buf += head;
+               len -= head;
+       }
+
+       /*
+        * Only transfer multiples of 4 bytes in a pre-fetched fashion.
+        * If there's a residue, care for it byte-wise afterwards.
+        */
+       tail = len % 4;
+
+       ret = __read_prefetch_aligned(chip, (uint32_t *) buf, len - tail);
+       if (ret < 0) {
+               /* fallback in case the prefetch engine is busy */
+               nand_read_buf(mtd, buf, len);
+       } else if (tail) {
+               buf += len - tail;
+               nand_read_buf(mtd, buf, tail);
+       }
+}
+#endif /* CONFIG_NAND_OMAP_GPMC_PREFETCH */
+
 /**
  * omap_read_page_bch - hardware ecc based page read function
  * @mtd:       mtd info structure
@@ -1084,11 +1193,12 @@ int board_nand_init(struct nand_chip *nand)
        nand->bbt_md = &bbt_mirror_descr;
 #endif
 
-#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_NAND_OMAP_GPMC_PREFETCH
+       /* TODO: Implement for 16-bit bus width */
        if (nand->options & NAND_BUSWIDTH_16)
                nand->read_buf = nand_read_buf16;
        else
-               nand->read_buf = nand_read_buf;
+               nand->read_buf = omap_nand_read_prefetch8;
 #endif
 
        nand->dev_ready = omap_dev_ready;