Merge branch 'master' of git://www.denx.de/git/u-boot-imx

[karo-tx-uboot.git] / drivers / serial / ns16550.c

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index b2da8b318e99d34e12f87c0279606d0915233aac..079f67d3801b0c3297076beb62f7d8c02565323e 100644 (file)
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -30,20 +30,45 @@
 #define serial_in(y)           readb(y)
 #endif
 
+#if defined(CONFIG_SOC_KEYSTONE)
+#define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE   0
+#define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0))
+#undef UART_MCRVAL
+#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL
+#define UART_MCRVAL             (UART_MCR_RTS | UART_MCR_AFE)
+#else
+#define UART_MCRVAL             (UART_MCR_RTS)
+#endif
+#endif
+
 #ifndef CONFIG_SYS_NS16550_IER
 #define CONFIG_SYS_NS16550_IER  0x00
 #endif /* CONFIG_SYS_NS16550_IER */
 
 void NS16550_init(NS16550_t com_port, int baud_divisor)
 {
-#if (!defined(CONFIG_SYS_NS16550_BROKEN_TEMT))
+#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_OMAP34XX))
+       /*
+        * On some OMAP3 devices when UART3 is configured for boot mode before
+        * SPL starts only THRE bit is set. We have to empty the transmitter
+        * before initialization starts.
+        */
+       if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE))
+            == UART_LSR_THRE) {
+               serial_out(UART_LCR_DLAB, &com_port->lcr);
+               serial_out(baud_divisor & 0xff, &com_port->dll);
+               serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
+               serial_out(UART_LCRVAL, &com_port->lcr);
+               serial_out(0, &com_port->mdr1);
+       }
+#endif
+
        while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT))
                ;
-#endif
 
        serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier);
-#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
-                                       defined(CONFIG_AM33XX)
+#if defined(CONFIG_OMAP) || defined(CONFIG_AM33XX) || \
+                       defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
        serial_out(0x7, &com_port->mdr1);       /* mode select reset TL16C750*/
 #endif
        serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr);
@@ -56,17 +81,16 @@ void NS16550_init(NS16550_t com_port, int baud_divisor)
        serial_out(baud_divisor & 0xff, &com_port->dll);
        serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm);
        serial_out(UART_LCRVAL, &com_port->lcr);
-#if (defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)) || \
-       defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX)
+#if defined(CONFIG_OMAP) || \
+       defined(CONFIG_AM33XX) || defined(CONFIG_SOC_DA8XX) || \
+       defined(CONFIG_TI81XX) || defined(CONFIG_AM43XX)
 
-#if defined(CONFIG_APTIX)
-       /* /13 mode so Aptix 6MHz can hit 115200 */
-       serial_out(3, &com_port->mdr1);
-#else
        /* /16 is proper to hit 115200 with 48MHz */
        serial_out(0, &com_port->mdr1);
-#endif
 #endif /* CONFIG_OMAP */
+#if defined(CONFIG_SOC_KEYSTONE)
+       serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC);
+#endif
 }
 
 #ifndef CONFIG_NS16550_MIN_FUNCTIONS