ZOOM2 Add serial support.

[karo-tx-uboot.git] / drivers / serial / ns16550.c

diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c
index 6b3f60eb575c3d9eaf31f92da5a169a58167e677..2fcc8c31633ab9d41e859847c17b02e9d0805545 100644 (file)
--- a/drivers/serial/ns16550.c
+++ b/drivers/serial/ns16550.c
@@ -1,68 +1,71 @@
 /*
  * COM1 NS16550 support
  * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
+ * modified to use CONFIG_SYS_ISA_MEM and new defines
  */
 
 #include <config.h>
-
-#ifdef CFG_NS16550
-
 #include <ns16550.h>
 
-#define LCRVAL LCR_8N1                                 /* 8 data, 1 stop, no parity */
-#define MCRVAL (MCR_DTR | MCR_RTS)                     /* RTS/DTR */
-#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR)     /* Clear & enable FIFOs */
+#define UART_LCRVAL UART_LCR_8N1               /* 8 data, 1 stop, no parity */
+#define UART_MCRVAL (UART_MCR_DTR | \
+                    UART_MCR_RTS)              /* RTS/DTR */
+#define UART_FCRVAL (UART_FCR_FIFO_EN |        \
+                    UART_FCR_RXSR |    \
+                    UART_FCR_TXSR)             /* Clear & enable FIFOs */
 
 void NS16550_init (NS16550_t com_port, int baud_divisor)
 {
        com_port->ier = 0x00;
-#ifdef CONFIG_OMAP
+#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
        com_port->mdr1 = 0x7;   /* mode select reset TL16C750*/
 #endif
-       com_port->lcr = LCR_BKSE | LCRVAL;
+       com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
        com_port->dll = 0;
        com_port->dlm = 0;
-       com_port->lcr = LCRVAL;
-       com_port->mcr = MCRVAL;
-       com_port->fcr = FCRVAL;
-       com_port->lcr = LCR_BKSE | LCRVAL;
+       com_port->lcr = UART_LCRVAL;
+       com_port->mcr = UART_MCRVAL;
+       com_port->fcr = UART_FCRVAL;
+       com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
        com_port->dll = baud_divisor & 0xff;
        com_port->dlm = (baud_divisor >> 8) & 0xff;
-       com_port->lcr = LCRVAL;
-#if defined(CONFIG_OMAP)
+       com_port->lcr = UART_LCRVAL;
+#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
 #if defined(CONFIG_APTIX)
        com_port->mdr1 = 3;     /* /13 mode so Aptix 6MHz can hit 115200 */
 #else
        com_port->mdr1 = 0;     /* /16 is proper to hit 115200 with 48MHz */
 #endif
-#endif
+#endif /* CONFIG_OMAP */
 }
 
+#ifndef CONFIG_NS16550_MIN_FUNCTIONS
 void NS16550_reinit (NS16550_t com_port, int baud_divisor)
 {
        com_port->ier = 0x00;
-       com_port->lcr = LCR_BKSE | LCRVAL;
+       com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
        com_port->dll = 0;
        com_port->dlm = 0;
-       com_port->lcr = LCRVAL;
-       com_port->mcr = MCRVAL;
-       com_port->fcr = FCRVAL;
-       com_port->lcr = LCR_BKSE;
+       com_port->lcr = UART_LCRVAL;
+       com_port->mcr = UART_MCRVAL;
+       com_port->fcr = UART_FCRVAL;
+       com_port->lcr = UART_LCR_BKSE;
        com_port->dll = baud_divisor & 0xff;
        com_port->dlm = (baud_divisor >> 8) & 0xff;
-       com_port->lcr = LCRVAL;
+       com_port->lcr = UART_LCRVAL;
 }
+#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
 
 void NS16550_putc (NS16550_t com_port, char c)
 {
-       while ((com_port->lsr & LSR_THRE) == 0);
+       while ((com_port->lsr & UART_LSR_THRE) == 0);
        com_port->thr = c;
 }
 
+#ifndef CONFIG_NS16550_MIN_FUNCTIONS
 char NS16550_getc (NS16550_t com_port)
 {
-       while ((com_port->lsr & LSR_DR) == 0) {
+       while ((com_port->lsr & UART_LSR_DR) == 0) {
 #ifdef CONFIG_USB_TTY
                extern void usbtty_poll(void);
                usbtty_poll();
@@ -73,7 +76,7 @@ char NS16550_getc (NS16550_t com_port)
 
 int NS16550_tstc (NS16550_t com_port)
 {
-       return ((com_port->lsr & LSR_DR) != 0);
+       return ((com_port->lsr & UART_LSR_DR) != 0);
 }
 
-#endif
+#endif /* CONFIG_NS16550_MIN_FUNCTIONS */