* $Log: skgepnmi.h,v $
* Revision 1.59 2002/12/16 14:03:50 tschilli
* New defines for VCT added.
- *
+ *
* Revision 1.58 2002/12/16 09:04:59 tschilli
* Code for VCT handling added.
- *
+ *
* Revision 1.57 2002/09/26 12:41:05 tschilli
* SK_PNMI_PORT BufPort entry in struct SK_PNMI added.
- *
+ *
* Revision 1.56 2002/08/16 11:10:41 rwahl
* - Replaced c++ comment.
- *
+ *
* Revision 1.55 2002/08/09 15:40:21 rwahl
* Editorial change (renamed ConfSpeedCap).
- *
+ *
* Revision 1.54 2002/08/09 11:06:07 rwahl
* Added OID_SKGE_SPEED_CAP.
- *
+ *
* Revision 1.53 2002/08/09 09:45:28 rwahl
* Added support for NDIS OID_PNP_xxx.
* Editorial changes.
- *
+ *
* Revision 1.52 2002/08/06 17:54:07 rwahl
* - Added speed cap to PNMI config struct.
- *
+ *
* Revision 1.51 2002/07/17 19:19:26 rwahl
* - Added OID_SKGE_SPEED_MODE and OID_SKGE_SPEED_STATUS.
* - Added SK_PNMI_CNT_RX_PMACC_ERR() & SK_PNMI_CNT_RX_LONGFRAMES().
* - Added speed mode & status to PNMI config struct.
* - Editorial changes.
- *
+ *
* Revision 1.50 2002/05/22 08:59:37 rwahl
* Added string definitions for error msgs.
- *
+ *
* Revision 1.49 2001/11/20 09:23:50 rwahl
* - pnmi struct: reordered and aligned to 32bit.
- *
+ *
* Revision 1.48 2001/02/23 14:34:24 mkunz
* Changed macro PHYS2INST. Added pAC to Interface
- *
+ *
* Revision 1.47 2001/02/07 08:28:23 mkunz
* - Added Oids: OID_SKGE_DIAG_ACTION
* OID_SKGE_DIAG_RESULT
* OID_SKGE_CURRENT_PACKET_FILTER
* OID_SKGE_INTERMEDIATE_SUPPORT
* - Changed value of OID_SKGE_MTU
- *
+ *
* Revision 1.46 2001/02/06 10:01:41 mkunz
* - Pnmi V4 dual net support added. Interface functions and macros extended
* - Vpd bug fixed
* - OID_SKGE_MTU added
- *
+ *
* Revision 1.45 2001/01/22 13:41:37 rassmann
* Supporting two nets on dual-port adapters.
- *
+ *
* Revision 1.44 2000/09/07 07:35:27 rwahl
* - removed NDIS counter specific data type.
* - fixed spelling for OID_SKGE_RLMT_PORT_PREFERRED.
- *
+ *
* Revision 1.43 2000/08/04 11:41:08 rwahl
* - Fixed compiler warning (port is always >= 0) for macros
* SK_PNMI_CNT_RX_LONGFRAMES & SK_PNMI_CNT_SYNC_OCTETS
- *
+ *
* Revision 1.42 2000/08/03 15:14:07 rwahl
* - Corrected error in driver macros addressing a physical port.
- *
+ *
* Revision 1.41 2000/08/01 16:22:29 rwahl
* - Changed MDB version to 3.1.
* - Added definitions for StatRxLongFrames counter.
* - Added macro to be used by driver to count long frames received.
* - Added directive to control width (default = 32bit) of NDIS statistic
* counters (SK_NDIS_64BIT_CTR).
- *
+ *
* Revision 1.40 2000/03/31 13:51:34 rwahl
* Added SK_UPTR cast to offset calculation for PNMI struct fields;
* missing cast caused compiler warnings by Win64 compiler.
*
* Revision 1.39 1999/12/06 10:09:47 rwahl
* Added new error log message.
- *
+ *
* Revision 1.38 1999/11/22 13:57:55 cgoos
* Changed license header to GPL.
*
* Revision 1.37 1999/09/14 14:25:32 rwahl
* Set MDB version for 1000Base-T (sensors, Master/Slave) changes.
- *
+ *
* Revision 1.36 1999/05/20 09:24:56 cgoos
* Changes for 1000Base-T (sensors, Master/Slave).
- *
+ *
* Revision 1.35 1999/04/13 15:10:51 mhaveman
* Replaced RLMT macros SK_RLMT_CHECK_xxx again by those of PNMI to
* grant unified interface. But PNMI macros will store the same
* value as RLMT macros.
- *
+ *
* Revision 1.34 1999/04/13 15:03:49 mhaveman
* -Changed copyright
* -Removed SK_PNMI_RLMT_MODE_CHK_xxx macros. Those of RLMT should be
* used.
- *
+ *
* Revision 1.33 1999/03/23 10:41:02 mhaveman
* Changed comments.
- *
+ *
* Revision 1.32 1999/01/25 15:01:33 mhaveman
* Added support for multiple simultaniously active ports.
- *
+ *
* Revision 1.31 1999/01/19 10:06:26 mhaveman
* Added new error log message.
- *
+ *
* Revision 1.30 1999/01/05 10:34:49 mhaveman
* Fixed little error in RlmtChangeEstimate calculation.
- *
+ *
* Revision 1.29 1999/01/05 09:59:41 mhaveman
* Redesigned port switch average calculation to avoid 64bit
* arithmetic.
- *
+ *
* Revision 1.28 1998/12/08 10:05:48 mhaveman
* Defined macro SK_PNMI_MIN_STRUCT_SIZE.
- *
+ *
* Revision 1.27 1998/12/03 14:39:35 mhaveman
* Fixed problem that LSTAT was enumerated wrong.
- *
+ *
* Revision 1.26 1998/12/03 11:19:51 mhaveman
* Changed contents of errlog message SK_PNMI_ERR016MSG
- *
+ *
* Revision 1.25 1998/12/01 10:40:04 mhaveman
* Changed size of SensorNumber, ChecksumNumber and RlmtPortNumber in
* SK_PNMI_STRUCT_DATA to be conform with OID definition.
- *
+ *
* Revision 1.24 1998/11/20 08:09:27 mhaveman
* Added macros to convert between logical, physical port indexes and
* instances.
- *
+ *
* Revision 1.23 1998/11/10 13:41:13 mhaveman
* Needed to change interface, because NT driver needs a return value
* of needed buffer space on TOO_SHORT errors. Therefore all
* SkPnmiGet/Preset/Set functions now have a pointer to the length
* parameter, where the needed space on error is returned.
- *
+ *
* Revision 1.22 1998/11/03 12:05:51 mhaveman
* Added pAC parameter to counter macors.
*
* Revision 1.21 1998/11/02 10:47:36 mhaveman
* Added syslog messages for internal errors.
- *
+ *
* Revision 1.20 1998/10/30 15:49:36 mhaveman
* -Removed unused SK_PNMI_UTILIZATION_BASE and EstOldCnt.
* -Redefined SK_PNMI_CHG_EST_BASE to hundreds of seconds.
- *
+ *
* Revision 1.19 1998/10/29 15:38:44 mhaveman
* Changed string lengths of PNMI_STRUCT_DATA structure because
* string OIDs are now encoded with leading length ocetet.
- *
+ *
* Revision 1.18 1998/10/29 08:52:27 mhaveman
* -Added byte to strings in PNMI_STRUCT_DATA structure.
* -Shortened SK_PNMI_RLMT structure to SK_MAX_MACS elements.
- *
+ *
* Revision 1.17 1998/10/28 08:49:50 mhaveman
* -Changed type of Instance back to SK_U32 because of VPD
* -Changed type from SK_U8 to char of PciBusSpeed, PciBusWidth, PMD,
* and Connector.
- *
+ *
* Revision 1.16 1998/10/22 10:42:31 mhaveman
* -Removed (SK_U32) casts for OIDs
* -excluded NDIS OIDs when they are already defined with ifndef _NDIS_
- *
+ *
* Revision 1.15 1998/10/20 13:56:28 mhaveman
* Headerfile includes now directly other header files to comile correctly.
- *
+ *
* Revision 1.14 1998/10/20 07:31:09 mhaveman
* Made type changes to unsigned int where possible.
- *
+ *
* Revision 1.13 1998/10/19 10:53:13 mhaveman
* -Casted OID definitions to SK_U32
* -Renamed RlmtMAC... to RlmtPort...
* -Changed wrong type of VpdEntriesList from SK_U32 to char *
- *
+ *
* Revision 1.12 1998/10/13 07:42:27 mhaveman
* -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA
* -Removed old cvs history entries
* -Renamed MacNumber to PortNumber
- *
+ *
* Revision 1.11 1998/10/07 10:55:24 mhaveman
* -Added OID_MDB_VERSION. Therefore was a renumbering of the VPD OIDs
* necessary.
* -Added OID_GEN_ Ids to support the windows driver.
- *
+ *
* Revision 1.10 1998/09/30 13:41:10 mhaveman
* Renamed some OIDs to reduce usage of 'MAC' which is replaced by 'PORT'.
- *
+ *
* Revision 1.9 1998/09/04 17:06:17 mhaveman
* -Added SyncCounter as macro.
* -Renamed OID_SKGE_.._NO_DESCR_CTS to OID_SKGE_.._NO_BUF_CTS.
* -Added macros for driver description and version strings.
- *
+ *
* Revision 1.8 1998/09/04 14:36:52 mhaveman
* Added OIDs and Structure to access value of macro counters which are
* counted by the driver.
- *
+ *
* Revision 1.7 1998/09/04 11:59:36 mhaveman
* Everything compiles now. Driver Macros for counting still missing.
- *
+ *
****************************************************************************/
#ifndef _SKGEPNMI_H_
/* #define OID_802_3_MULTICAST_LIST 0x01010103 */
/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */
/* #define OID_802_3_MAC_OPTIONS 0x01010105 */
-
+
#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101
#define OID_802_3_XMIT_ONE_COLLISION 0x01020102
#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103
#define OID_SKGE_VPD_VALUE 0xFF010106
#define OID_SKGE_VPD_ACCESS 0xFF010107
#define OID_SKGE_VPD_ACTION 0xFF010108
-
+
#define OID_SKGE_PORT_NUMBER 0xFF010110
#define OID_SKGE_DEVICE_TYPE 0xFF010111
#define OID_SKGE_DRIVER_DESCR 0xFF010112
#define OID_SKGE_SPEED_MODE 0xFF010171
#define OID_SKGE_SPEED_STATUS 0xFF010172
-#define OID_SKGE_SENSOR_NUMBER 0xFF020100
+#define OID_SKGE_SENSOR_NUMBER 0xFF020100
#define OID_SKGE_SENSOR_INDEX 0xFF020101
#define OID_SKGE_SENSOR_DESCR 0xFF020102
#define OID_SKGE_SENSOR_TYPE 0xFF020103
projects / karo-tx-uboot.git / blobdiff