#include <asm/arch/gpio.h>
#include <asm/arch/usb_phy.h>
#include <asm-generic/gpio.h>
+#include <dm/lists.h>
+#include <dm/root.h>
#include <linux/usb/musb.h>
#include "linux-compat.h"
#include "musb_core.h"
+#include "musb_uboot.h"
/******************************************************************************
******************************************************************************
static int sunxi_musb_enable(struct musb *musb)
{
- int ret;
-
pr_debug("%s():\n", __func__);
+ musb_ep_select(musb->mregs, 0);
+ musb_writeb(musb->mregs, MUSB_FADDR, 0);
+
if (enabled)
return 0;
musb_writeb(musb->mregs, USBC_REG_o_VEND0, 0);
if (is_host_enabled(musb)) {
- ret = sunxi_usb_phy_vbus_detect(0);
- if (ret) {
- printf("A charger is plugged into the OTG: ");
- return -ENODEV;
+ int id = sunxi_usb_phy_id_detect(0);
+
+ if (id == 1 && sunxi_usb_phy_power_is_on(0))
+ sunxi_usb_phy_power_off(0);
+
+ if (!sunxi_usb_phy_power_is_on(0)) {
+ int vbus = sunxi_usb_phy_vbus_detect(0);
+ if (vbus == 1) {
+ printf("A charger is plugged into the OTG: ");
+ return -ENODEV;
+ }
}
- ret = sunxi_usb_phy_id_detect(0);
- if (ret == 1) {
+
+ if (id == 1) {
printf("No host cable detected: ");
return -ENODEV;
}
- sunxi_usb_phy_power_on(0); /* port power on */
+
+ if (!sunxi_usb_phy_power_is_on(0))
+ sunxi_usb_phy_power_on(0);
}
USBC_ForceVbusValidToHigh(musb->mregs);
if (!enabled)
return;
- if (is_host_enabled(musb))
- sunxi_usb_phy_power_off(0); /* port power off */
-
USBC_ForceVbusValidToLow(musb->mregs);
mdelay(200); /* Wait for the current session to timeout */
};
static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_MUSB_HOST)
+#if defined(CONFIG_USB_MUSB_HOST)
.mode = MUSB_HOST,
#else
.mode = MUSB_PERIPHERAL,
.platform_ops = &sunxi_musb_ops,
};
+#ifdef CONFIG_USB_MUSB_HOST
+int musb_usb_probe(struct udevice *dev)
+{
+ struct musb_host_data *host = dev_get_priv(dev);
+ struct usb_bus_priv *priv = dev_get_uclass_priv(dev);
+ int ret;
+
+ priv->desc_before_addr = true;
+
+ if (!host->host) {
+ host->host = musb_init_controller(&musb_plat, NULL,
+ (void *)SUNXI_USB0_BASE);
+ if (!host->host)
+ return -EIO;
+ }
+
+ ret = musb_lowlevel_init(host);
+ if (ret == 0)
+ printf("MUSB OTG\n");
+
+ return ret;
+}
+
+int musb_usb_remove(struct udevice *dev)
+{
+ struct musb_host_data *host = dev_get_priv(dev);
+
+ musb_stop(host->host);
+
+ return 0;
+}
+
+U_BOOT_DRIVER(usb_musb) = {
+ .name = "sunxi-musb",
+ .id = UCLASS_USB,
+ .probe = musb_usb_probe,
+ .remove = musb_usb_remove,
+ .ops = &musb_usb_ops,
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct musb_host_data),
+};
+#endif
+
void sunxi_musb_board_init(void)
{
+#ifdef CONFIG_USB_MUSB_HOST
+ struct udevice *dev;
+
+ /*
+ * Bind the driver directly for now as musb linux kernel support is
+ * still pending upstream so our dts files do not have the necessary
+ * nodes yet. TODO: Remove this as soon as the dts nodes are in place
+ * and bind by compatible instead.
+ */
+ device_bind_driver(dm_root(), "sunxi-musb", "sunxi-musb", &dev);
+#else
musb_register(&musb_plat, NULL, (void *)SUNXI_USB0_BASE);
+#endif
}